Printable View
alright im trying to get more info on useing and improving computers.
1st.what info do i need to give you,so i can overclock my cpu
2.how long is it ok to leave on my computer?[my room is quite cool]
thats all i can think of right now.try to keep your A simple. :D
2. As long as you have adequate cooling on your PC then there is no harm in leaving it on 24/7. Mine has been on since Febuary, only being turned off for upgrades and rebooting.
Unless you are one of those hippy types and worry about the environment and stuff... ;)
i think most of the power goes straight through the monitor. :unsure:
thats good,i turn mine off at night.
Mine is only on when needed
good 4 U :D
3.dose eny one have a link to a prog that makes you pc shutdown when it gets too hot?
if most do it to themselves dont they? :blink:Quote:
Originally posted by ziggyjuarez@2 August 2004 - 09:07
good 4 U :D
3.dose eny one had a link to a prog that makes you pc shutdown when it gets too hot?
if most do it to themselves dont they? :blink: [/b][/quote]Quote:
Originally posted by MicroScreen2+2 August 2004 - 09:09--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (MicroScreen2 @ 2 August 2004 - 09:09)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-ziggyjuarez@2 August 2004 - 09:07
good 4 U :D
3.dose eny one had a link to a prog that makes you pc shutdown when it gets too hot?
How should i know,im a nO0b.
4.MHz?
4 megahertz?
question #4 - MHz?Quote:
Originally posted by Duffman3@2 August 2004 - 10:05
4 megahertz?
Make and model of the motherboard, CPU info and current temps would be a good start.Quote:
Originally posted by ziggyjuarez@2 August 2004 - 02:12
1st.what info do i need to give you,so i can overclock my cpu
3.dose eny one have a link to a prog that makes you pc shutdown when it gets too hot?
MBM5 can be set up to execute the shutdown at any temp you wish.
Also, many motherboards have thermal protection programs built into BIOS.
Motherboard Properties
Motherboard ID 08/08/2003-nForce2-IGP-6A61BF0BC-00
Motherboard Name FIC K7M-NF18G (AU31)
Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2666 MB/s
Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2666 MB/s
Chipset Bus Properties
Bus Type HyperTransport v1.0
Bus Width 8-bit
Motherboard Physical Info
CPU Sockets/Slots 1
Expansion Slots 3 PCI, 1 AGP
RAM Slots 2 DIMM
Integrated Devices Audio, Video, LAN
Form Factor Micro ATX
Motherboard Size 240 mm x 240 mm
Motherboard Chipset nForce2-IGP
Motherboard Manufacturer
Company Name First International Computer, Inc.
Product Information http://www.fic.com.tw/product/motherboard
BIOS Download http://www.fic.com.tw/support/motherboard/...rboard_all.aspx
CPU Properties
CPU Type AMD Athlon XP-A, 2166 MHz (6.5 x 333) 3000+
CPU Alias Barton
CPU Stepping A2
L1 Code Cache 64 KB
L1 Data Cache 64 KB
L2 Cache 512 KB (On-Die, Full-Speed)
CPU Physical Info
Package Type 453 Pin PGA
Package Size 4.95 cm x 4.95 cm
Transistors 54.3 million
Process Technology 6Mi, 0.13 um, CMOS, Cu
Die Size 101 mm2
Core Voltage 1.65 V
I/O Voltage 1.6 V
Typical Power 53.7 - 60.4 W (depending on clock speed)
Maximum Power 68.3 - 76.8 W (depending on clock speed)
CPU Manufacturer
Company Name Advanced Micro Devices, Inc.
Product Information http://www.amd.com/us-en/Processors/Produc...,30_118,00.html
CPU Utilization
CPU #1 100 %
Sensor Properties
Sensor Type ITE IT8712F
Sensor Access ISA 290h
Motherboard Name FIC K7M-NF18G
Temperatures
Motherboard 40 °C (104 °F)
CPU 47 °C (117 °F)
Cooling Fans
CPU 3590 RPM
Chassis 2109 RPM
Voltage Values
CPU Core 1.60 V
+3.3 V 3.28 V
+5 V 4.92 V
+12 V 11.71 V
+5 V Standby 4.92 V
_______________________________
is all this info ok to give out :unsure:
question #4 - MHz? [/b][/quote]Quote:
Originally posted by ziggyjuarez+2 August 2004 - 05:10--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (ziggyjuarez @ 2 August 2004 - 05:10)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Duffman3@2 August 2004 - 10:05
4 megahertz?
thats more of a word that a question.
Make and model of the motherboard, CPU info and current temps would be a good start.Quote:
Originally posted by clocker+2 August 2004 - 10:14--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (clocker @ 2 August 2004 - 10:14)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-ziggyjuarez@2 August 2004 - 02:12
1st.what info do i need to give you,so i can overclock my cpu
3.dose eny one have a link to a prog that makes you pc shutdown when it gets too hot?
MBM5 can be set up to execute the shutdown at any temp you wish.
Also, many motherboards have thermal protection programs built into BIOS. [/b][/quote]
im gonna make it do it at 3 degrees C. just for laugh :D :blink:
Then you'll be laughing at a PC that will refuse to boot into Windows.Quote:
Originally posted by MicroScreen2@2 August 2004 - 04:27
im gonna make it do it at 3 degrees C. just for laugh :D :blink:
I find that kinda amusing myself. :P
Ziggy,
After looking at the users manual for your board it would appear that you don't have ANY options to overclock your chip.
Sorry.
thats more of a word that a question. [/b][/quote]Quote:
Originally posted by Duffman3+2 August 2004 - 11:26--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Duffman3 @ 2 August 2004 - 11:26)</td></tr><tr><td id='QUOTE'>Quote:
Originally posted by ziggyjuarez@2 August 2004 - 05:10
<!--QuoteBegin-Duffman3
Quote:
@2 August 2004 - 10:05
4 megahertz?
question #4 - MHz?
its not even a word, its an abreviation :P
:(Quote:
Originally posted by clocker@2 August 2004 - 10:42
Ziggy,
After looking at the users manual for your board it would appear that you don't have ANY options to overclock your chip.
Sorry.
o'well my thing running real fast enyway [4me]
sounds like a challenge to meQuote:
Originally posted by clocker@2 August 2004 - 10:42
Ziggy,
After looking at the users manual for your board it would appear that you don't have ANY options to overclock your chip.
Sorry.
Judging by the number of work-units you have completed, your computer is already pretty fast...
now that depends how long he/she has been at it........Quote:
Originally posted by nigel123@2 August 2004 - 21:32
Judging by the number of work-units you have completed, your computer is already pretty fast...