Heatsink/cpu cleaning help
I planning to replace my AMD64 Heatsink and fan because the stock fan (70mm) is just too loud. I going to replace is with an 80mm (or 92mm) fan as well as the heatsink. Can anyone suggest a proceedure on removing that sticky paste before I apply Artic Silver on the CPU? Can anyone suggest a solvent preferably non-toxic?
Re: Heatsink/cpu cleaning help
rubbing alcohol is what most use.
i found that lighter fluid takes the paste off WAYYYYY better, but i'm not entirely sure if that's safe to use.
i just do another quick wipe to get all of the lighter fluid off after removing the old paste.
Use a q-tip.
Re: Heatsink/cpu cleaning help
Use your fingernail to remove what you can. I use an electronics cleaner that comes in a spray can. I don't spray directly on the parts but onto a Q-tip and it works perfectly.
Re: Heatsink/cpu cleaning help
Quote:
Originally Posted by Virtualbody1234
Use your fingernail to remove what you can. I use an electronics cleaner that comes in a spray can. I don't spray directly on the parts but onto a Q-tip and it works perfectly.
That sounds good. Video head cleaner fluid sounds safe.
Thanks for all the suggestions ;)
Re: Heatsink/cpu cleaning help
Video head cleaner doesn't work as well as the cleaner I mentioned.
Re: Heatsink/cpu cleaning help
Quote:
Originally Posted by Virtualbody1234
Video head cleaner doesn't work as well as the cleaner I mentioned.
Thanks for pointing that out. I thought it was the same thing. :)
Re: Heatsink/cpu cleaning help
Video head cleaner and rubbing alcohol is the same shit.
Re: Heatsink/cpu cleaning help
Quote:
Originally Posted by Virtualbody1234
Use your fingernail to remove what you can. I use an electronics cleaner that comes in a spray can. I don't spray directly on the parts but onto a Q-tip and it works perfectly.
are you refering to contact cleaner by chance
Re: Heatsink/cpu cleaning help
Re: Heatsink/cpu cleaning help
electrical parts cleaner/contact cleaner like VB said
its non-conductive, which is a pretty good idea
but i think its kinda semi-corrosive (some brands) so you cant spray it on plastics
the q-tip thing is a good idea
used alcohol before, it works, and it evaporates, which is good
the parts/contact cleaner doesnt if i remember right
(i havent touched none of that stuff for months)
i usually just use a plain old shop rag to wipe the stuff off :lol:
cant be fkd hunting down the alcohol or goin to the store for cleaner :P