Results 1 to 6 of 6

Thread: i want to join my pc and TV

  1. #1
    Poster
    Join Date
    Jul 2003
    Location
    london baby!!
    Posts
    366
    right how do i it, i want to watch my computer files on my TV is there an easy way to do this????

  2. Software & Hardware   -   #2
    Barbarossa's Avatar mostly harmless
    Join Date
    Jun 2002
    Location
    Over here!
    Posts
    15,180
    Do you have a TV Out socket on your graphics card?

  3. Software & Hardware   -   #3
    Poster
    Join Date
    Jul 2003
    Location
    london baby!!
    Posts
    366
    yep think so here is a pic of the back of the comp


  4. Software & Hardware   -   #4
    Virtualbody1234's Avatar Forum Star BT Rep: +2
    Join Date
    Oct 2003
    Location
    Canada
    Posts
    10,763
    Does your TV have S-Video IN?

    If not then tell us what it has.

  5. Software & Hardware   -   #5
    Poster
    Join Date
    Jul 2003
    Location
    london baby!!
    Posts
    366
    it has a scart on the rear and on the front it has a yellow hole and a white hole for sound and video

  6. Software & Hardware   -   #6
    lynx's Avatar .
    Join Date
    Sep 2002
    Location
    Yorkshire, England
    Posts
    9,759
    The socket next to your video connector is a combined s-video/composite video connector. The outermost 4 holes are s-video. The inner 2 holes on the top row are composite video. The middle hole on the bottom row is unused.

    The Yellow connector on the front of your TV is probably composite video. I can't understand why there's only a white connector for the audio. That's usually just the right channel, there should be a red one for the left channel too.

    You should also be able to pass composite video signals via the scart socket, and s-video too if your tv supports it.
    You will need an adapter such as this:

    http://www.misco.co.uk/productinform...affiliate=3000

    If you want sound you have to connect your PC's sound card to the white and red connectors, so you need a 3.5mm jack to RCA adapter.
    http://www.misco.co.uk/SSinfo/~44691...RCA+-+3.5M.htm

    That just leaves the video cables.

    If your TV supports s-video on the scart connector then the only additional lead you need is a s-video cable.
    http://www.misco.co.uk/SSinfo/~44708...DIN+4+-+3M.htm

    If it doesn't support s-video, you are probably going to have to make up your own cable. I haven't found any adapters and I've only found one supplier of 7-pin mini-din connectors in the UK.
    http://www.tait-components.com/Produ...ectors&iPage=1
    And of course you need an RCA plug to go with that.
    http://www.tait-components.com/Produ...ectors&iPage=1
    That's about it, apart from some shielded wire to connect them.
    If you need to go down this route, you will need to know which pin is signal and which is ground, but that's probably best left for now.

    BTW, these are just examples, you can probably get most of these cheaper if you shop around.
    .
    Political correctness is based on the principle that it's possible to pick up a turd by the clean end.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •