Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34

Thread: Cpu Temp

  1. #21
    lynx's Avatar .
    Join Date
    Sep 2002
    Location
    Yorkshire, England
    Posts
    9,759
    +5v supply should never drop below about 4.95v, so you've got big problems. Try disconnecting the power to some of the devices (usb, cd, hd, etc) and check your bios reading again, if it is still low disconnect everything except the mobo and check again. If it is STILL low, get it checked with a meter, and if it is actually that low there's a fault, either your mobo is drawing too much power or you ps is faulty.

    If the voltage goes up when you disconnect some devices, you need a better ps, and pretty soon too.
    .
    Political correctness is based on the principle that it's possible to pick up a turd by the clean end.

  2. Software & Hardware   -   #22
    Poster
    Join Date
    Jun 2003
    Location
    England
    Posts
    1,377
    ill try dat in a min, cud i be riskin damage to comp if the +5 voltage is too low? its +4.47 atm.

  3. Software & Hardware   -   #23
    lynx's Avatar .
    Join Date
    Sep 2002
    Location
    Yorkshire, England
    Posts
    9,759
    Unlikely to do any physical damage, but you could get data transfer errors and bad disc writes, so you could end up with a corrupted system.
    .
    Political correctness is based on the principle that it's possible to pick up a turd by the clean end.

  4. Software & Hardware   -   #24
    Poster
    Join Date
    Jun 2003
    Location
    England
    Posts
    1,377
    unplugged all but m/b and g/c still got a similar voltage reading, wot do u think i shud do? i never had n e probs wid system b4!

  5. Software & Hardware   -   #25
    Poster
    Join Date
    Apr 2003
    Location
    Canada
    Posts
    1,170
    Check the voltage with a digital multimeter on one of those power cables:



    Check for DC voltage between the yellow and black.
    Check for DC voltage between the red and black.

    You will then see the actual 5V and 12V output of your power supply.

  6. Software & Hardware   -   #26
    Poster
    Join Date
    Jun 2003
    Location
    England
    Posts
    1,377
    Originally posted by Somebody1234@29 September 2003 - 22:04
    Check the voltage with a digital multimeter on one of those power cables:



    Check for DC voltage between the yellow and black.
    Check for DC voltage between the red and black.

    You will then see the actual 5V and 12V output of your power supply.
    a digital wot?! lol! ill jus take it 2 me local comp shop, i no sum1 der he'll sort it out and wont chagre me!

  7. Software & Hardware   -   #27
    Poster
    Join Date
    Apr 2003
    Location
    Canada
    Posts
    1,170
    Digital multimeter:

  8. Software & Hardware   -   #28
    lynx's Avatar .
    Join Date
    Sep 2002
    Location
    Yorkshire, England
    Posts
    9,759
    Originally posted by Somebody1234@29 September 2003 - 22:44
    Digital multimeter:
    That's just like the one I had, until my brother turned the power on when I was testing continuity. Got a decent one after that.
    .
    Political correctness is based on the principle that it's possible to pick up a turd by the clean end.

  9. Software & Hardware   -   #29
    abu_has_the_power's Avatar I have cool stars
    Join Date
    Apr 2003
    Posts
    6,447
    my rails r:
    +12V: +12.16
    +5V: +5.11V
    Core: +1.47V
    I/O: +3.36V
    Aux: +1.49

    i'm using a PowerTek 500 Watt Dual Fan PSU. how r the rails?

  10. Software & Hardware   -   #30
    abu_has_the_power's Avatar I have cool stars
    Join Date
    Apr 2003
    Posts
    6,447
    Originally posted by Kunal@29 September 2003 - 15:45


    dats wot i get on hardware systems monitor.
    mines a bit different:




Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •