So that means i have to stick with SD?? that really sucks, could i take out my 128 SD and only put in a 512 DDR? would that be ebtter then having a 128 and a 512 SD?
So that means i have to stick with SD?? that really sucks, could i take out my 128 SD and only put in a 512 DDR? would that be ebtter then having a 128 and a 512 SD?
Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate
lol I only have 667 mhz celeron with 512mb sdr.. you should do some research on your mother board and see if it supports more than 512mb of ram (you will be limited to sdr)..It seems like your in the same boat as me you computer is gettin a little gray around the edges..you haven't mentioned if you have an agp slot for these graphic cards ..I don't (have to stick with pci) good luck (you can download great software but when it comes to hardware $$$$$
According to this link you don't have an AGP slot and that will limit your choices in video cards.
http://www.hp.com/cposupport/personal_comp...0.html#P117_674
Gigabyte GA7-VT600 P-L
Athlon XP2500+ @ 3200+
512mb OCZ DDR333 (2,3,3,7)
Samsung SP8004h 80gig harddrive
Radeon 9200 128 mb
LG cdrw/dvd drive
Yeah except my computer is a refurbished one, and does not look like that at all. And on that site it says that is for computers up to 800 Mhz, mine is 850
mine is different then that so it might support one, not sure
Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate
What is the model number of your computer?
Gigabyte GA7-VT600 P-L
Athlon XP2500+ @ 3200+
512mb OCZ DDR333 (2,3,3,7)
Samsung SP8004h 80gig harddrive
Radeon 9200 128 mb
LG cdrw/dvd drive
System Model
00101701 XL916 15524300061459 00
System Serial Number: 5003HPPAV3
Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate
Is it possible for me to take out my 128 SD ram that i have now, and replace it with maybe a 512 DDR?
Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate
No you can't.If your board uses only SDRAM than you can only use SD.DDR has a different slot.If you take out your SD you'll notice that there is a cut out in the part of the chip that fits into the board,well DDR has it in a different spot.Your best bet would be to find out how much ram your board will support and than max it out.
Gigabyte GA7-VT600 P-L
Athlon XP2500+ @ 3200+
512mb OCZ DDR333 (2,3,3,7)
Samsung SP8004h 80gig harddrive
Radeon 9200 128 mb
LG cdrw/dvd drive
well try these links i think they may help seems like your limited to 512 mb sdr not sure about the video card though hp specs and here more search results
okay, i think i will end up getting 512 SD ram then, if thats the best i can do without upgrading my whole pc.
and do you think my computer could handle: PNY - Verto GeForce4 MX 440 AGP 64MB DDR SDRAM Graphics Card?
Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate
Bookmarks