Yup thats the good old piece of shit. Mine is set to turbo right now, but i have tried all the combos like optimal and shit but nothin works
Yup thats the good old piece of shit. Mine is set to turbo right now, but i have tried all the combos like optimal and shit but nothin works
- Unleash The Power Of The Wii, Unlock It Today!
http://www.castabet.net
Did you try to clear the CMOS?
Yes
- Unleash The Power Of The Wii, Unlock It Today!
http://www.castabet.net
Hmmm. Maybe if your motherboard is pretty new you could send it back...and get a diff mobo.
[SIZE=1]AMD 4200 X2 @ 2.65Ghz, ASRock 939-VSTA
1.75GB PC3200, 2 X 160GB Seagate w/ 8MB Buffer
HIS Radeon X800 Pro, Antec Super Lanboy Aluminum
Has the CPU been used on another board or is it new also? If it's new then CPU could be faulty.
Yes it was previously on another mobo.Originally posted by Virtualbody1234@10 January 2004 - 18:39
Has the CPU been used on another board or is it new also? If it's new then CPU could be faulty.
- Unleash The Power Of The Wii, Unlock It Today!
http://www.castabet.net
the multiplier on your cpu is locked, i think...have a look here if you want to unlock it [/b][/quote]Originally posted by 4th gen+10 January 2004 - 23:14--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (4th gen @ 10 January 2004 - 23:14)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Tormentor@10 January 2004 - 21:09
I know it dosnt support it because i googled it and it said it dosnt on like 5 sites, and its a Athlon 1800+ Palamino, o and the mobo is a chaintech 7nif2
I don't think his CPU would be locked.I have an XP 1900+ that has the Palomino core and it isn't locked.
Gigabyte GA7-VT600 P-L
Athlon XP2500+ @ 3200+
512mb OCZ DDR333 (2,3,3,7)
Samsung SP8004h 80gig harddrive
Radeon 9200 128 mb
LG cdrw/dvd drive
So am i basicaly fucked?
- Unleash The Power Of The Wii, Unlock It Today!
http://www.castabet.net
If it's locked it would be locked at 11.5 so that's not the problem.
What position is the JP25 jumper set to?Chapter 2
2-2 Setting Your CPU’s Performance:
Frequency Configuration:
If you install a CPU on this motherboard, you must set the [Front Side Bus
Frequency] JP25 according to your processor.
CPU Speed = Multiplier x FSB Frequency
You do not need to make voltage settings because this board will automatically
set your CPU voltage.
its set to 133/166, its default positionOriginally posted by Virtualbody1234@10 January 2004 - 22:39
If it's locked it would be locked at 11.5 so that's not the problem.
What position is the JP25 jumper set to?Chapter 2
2-2 Setting Your CPU’s Performance:
Frequency Configuration:
If you install a CPU on this motherboard, you must set the [Front Side Bus
Frequency] JP25 according to your processor.
CPU Speed = Multiplier x FSB Frequency
You do not need to make voltage settings because this board will automatically
set your CPU voltage.
- Unleash The Power Of The Wii, Unlock It Today!
http://www.castabet.net
Bookmarks