New Motherboad

[imported_Catracho]

When I boot up I plug the monitor to the graphic card and i get nothing. The cpu, cdr, dvdrom everything works but I cannt see anything. No bios no set up nothing! The monitor says "No signal imput"

Can someone please help me!

I'd be really grateful!! Thanks

[Keikan]

Try jaming the video card in the agp slot more?

[delphin460]

grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

[Mr. Elmo]

Originally posted by delphin460@3 April 2004 - 09:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

i dont think that would be the problem...i mean, what if ppl didnt have a pci gfx card?

is this in intergrated gfx card or a agp ?

does the card work in another system?

[imported_Catracho]

Originally posted by Mr. Elmo+3 April 2004 - 10:44--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Mr. Elmo @ 3 April 2004 - 10:44)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-delphin460@3 April 2004 - 09:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

i dont think that would be the problem...i mean, what if ppl didnt have a pci gfx card?

is this in intergrated gfx card or a agp ?

does the card work in another system? [/b][/quote]
It works on another system. I am going nuts man&#33;

Anyways....I dont know but i kind of need help here with some cables.

There are two gray cables comming out from the power supply

One of the cables have four tyny cables coming out
black = (1) Ground
Red = (1) + 5V
Green = (1) + D
White = (1) - D

The second one has five
Black = (2) Shields
Black = (2) Ground
Red = (2) + 5V
Green = (2) + D
White = (2) - D


MOBO = K7T266 Pro2-U

MS-6593 (v 1.X) ATX mainboard
AMD Athlon XP/ Athlon / Duron Processor

hope this info helps u help me thanks

Catracho

[imported_Catracho]

Originally posted by delphin460@3 April 2004 - 10:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

Cannt do that. Cannt even see boot up, no bios nothing.
The system turns on, cpu fans work, switches work.

[ck-uk]

on the board mate have u plug&#39;d the 2 power plugs in ,the 20 pin & the 4 pin ??

[Virtualbody1234]

Clear the CMOS.

[bigdawgfoxx]

Originally posted by Virtualbody1234@3 April 2004 - 07:32
Clear the CMOS.

I agree

I couldnt get my mobo to read my HDD and stuff and it just wouldnt work at all.

Reseting the CMOS made it all work fine. It might take a couple of trys though.

[ck-uk]

I rekon mate he hasnt put the 4 pin in mate which is what&#39;ill happen.It&#39;ll all power bu wont post.