Strange Dvd-r Burning Problems

[sebastian_insua]

A month ago I bought 100 DVD-R's from BigPockets.co.uk after copying 1 of the DVD's the others all started not copying and giving errors.
So I updated my DVD-R's firmware to SONY DVD RW DRU-510A 1.1f. However the disc's continued not to work (while a DVD-RW did work - so i knew that is was them not the DVD writer) so I sent them back (thinking it was an incompatability problem - and reading the decription it did mention incompatibility with Sony drives).

I decided to get "Business Special **Grade A Duplication Quality Media** 4x DVD-R" as this sounded pretty fail safe.
I burnt 5 DVD-R's which worked perfectly.
However when i tried to burn the 6th discs the problem sprung its ugly head again.

I discovered that for some discs that gave me an error i could burn at 1x and they would not give a write error.
However these discs would not be recognised in my DRU-510A or my Pioneer DVD-656a DVD Player.
They will be recognised by a Sony DDU1612.

I then found some discs did not want to burn even on 1x speed.
I tried burning onto these discs backups of films using DVD-Shrink and Pinnacle InstantCD+DVD (This didn't work).
I also tried burning using DVD-shrink and DVD-decrypter (This didn't work).


I finally tried using 321 Studios DVDXcopy Platinum (This worked as it played in my DRU-510A - but the DVD would not play in my DVD-656a DVD-Player only).

Something which may be to do with this is that the DVD's I burned with DVDXCopy Platinum were CDFS (Joliet) DVD's not UDF DVD's....??

Do you have any idea what to do...?
I am gonna get a copy of Nero and try with that (and perhaps try copying the Discs with UDF on).

[{I}{K}{E}]

what program do you use to burn?

I use Nero and I only had 3 or 4 problems when I burned @ 4 speed but its always possible some disks just wont burn... so I dont mind 4 out of around 100 goes in the trash. I have a poineer 8X but I always burn at 2 speed.

Your problem is maybe the software you use ATM. Try nero and when you try to copy an original DVD use the guide from the pinned topic made by 'ad'


btw. I always used PRINCO 4 speed DVD-r

I hope for you, you can burn soon without problems

[Voetsek]

If you fail to sort this this is a ok site with forums to help you

http://www.afterdawn.com/

[sebastian_insua]

Originally posted by Voetsek@24 June 2004 - 09:45
If you fail to sort this this is a ok site with forums to help you

http://www.afterdawn.com/

thanks.... I was looking for a decent forum to post this...

[Voetsek]

No problem hope that helps

[Robert00000]

Yes nero is the perhaps the best choice. If you want to use an alternative make sure you burn it at UDF 1.02 which is the native format for dvd's.

I remember years ago when i first bought my dvd writer even nero would cause problems burning, so i stopped using the default DVD VIDEO compilation method on nero and burnt it as DVD ROM (UDF) instead and it worked every time.

Nero have improved the software since and their default DVD VIDEO works fine every time.

[sebastian_insua]

I just tried DVDshrink with Nero (the latest version from Suprnova) and got this errror message twice (see below - Gives an error at the 100% stage).

Could not perform end of Disc-at-once

2 out of the 3 DVD's I have since burnt didnnot work in my DVD player (but worked in my D Drive and E Drive. Do you have any Idea what the problem is???:

1A23-0009-4030-1607-3193-1390

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.15
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 1 TA 1 - 6.3.1.15
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y160M0 YAR5 viasraid Port 2 ID 0 DMA: Off
CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1612 D: CDRom0
SONY DVD RW DRU-510A E: CDRom1
VOBID InstantDrive CD F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 549MB (562700kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.6.2004
NeroAPI
23:56:39 #1 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

23:56:39 #2 Text 0 File Reader.cpp, Line 118
Reader running

23:56:39 #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-510A running

23:56:39 #4 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

23:56:39 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

23:56:39 #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

23:56:39 #7 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

23:56:40 #8 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286143 (508:01.68, 4465MB)

23:56:40 #9 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

23:56:40 #10 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: VDSPMS - AB 01
Disc Application Code: 64, Disc Physical Code: 193

23:56:40 #11 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:56:40 #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [SONY DVD RW DRU-510A ]
--------------------------------------------------------------

23:56:40 #13 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [SONY DVD RW DRU-510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286144 | lead-out | 1 | 0x00 | 0x41

23:56:40 #14 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

23:56:40 #15 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

23:56:40 #16 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

23:56:40 #17 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)

23:56:40 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:56:40 #19 Text 0 File DVDR.cpp, Line 1840
Recording mode: Sequential Recording Mode for Multisession

23:56:40 #20 Text 0 File Mmc.cpp, Line 20239
Set BUFE: Power-Burn -> ON

23:56:40 #21 Text 0 File DVDR.cpp, Line 1981
Start write address at LBA 0
DVD high compatibility mode: Yes

23:56:40 #22 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00:11:31 #23 Text 0 File WriterStatus.cpp, Line 115
<SONY DVD RW DRU-510A > start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks

00:11:31 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

00:11:31 #25 Text 0 File DVDR.cpp, Line 2215
EndDAO: Last written address was 2286143

00:11:34 #26 Phase 133 File APIProgress.cpp, Line 273
Writing short lead-out

00:12:11 #27 SCSI -1135 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x23 0xC4 0xF0 0x12
0x00 0x00 0x00 0x00 0x0C 0x08

00:12:11 #28 CDR -1135 File ThreadedTransferInterface.cpp, Line 1707
Write error

00:12:11 #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1707
Could not perform end of Disc-at-once

00:12:11 #30 Text 0 File DVDR.cpp, Line 2215
EndDAO: Last written address was -1

00:12:11 #31 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)

00:12:11 #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

00:12:11 #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File &#39;Drivers&#092;ASPI32.SYS&#39;: Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 09:53:02
File &#39;Drivers&#092;PXHELP20.SYS&#39;: Ver=2.02.42a, size=17184 bytes, created 21/10/2002 10:33:40 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM&#092;Software&#092;Microsoft&#092;Windows NT&#092;CurrentVersion&#092;WinLogon&#092;AllocateCDROMs : 0 (Security Option)

[Entity101]

Update your ASPI drivers.

http://download.adaptec.com/software...aspi_471a2.exe

[SingaBoiy]

Shoulda got Sonic 2x dvd-r&#39;s. 100 pack for &#036;31 shipped. Register as 4x on my DRU-510A. Work perfect on my ps2. Havent tried them on either of my dvd players yet.