Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Sound Blaster Live 5.1

  1. #11
    Ex-member
    Join Date
    Jan 2003
    Posts
    5,450
    Headphones?

    Turn them round on your head, that should sort it.

  2. Software & Hardware   -   #12
    RPerry's Avatar Synergy BT Rep: Bad Rep
    Join Date
    Dec 2002
    Location
    Lakeland, Florida
    Age
    50
    Posts
    3,268
    well, it is plugged in the right jack anyway.....

  3. Software & Hardware   -   #13
    lynx's Avatar .
    Join Date
    Sep 2002
    Location
    Yorkshire, England
    Posts
    9,759
    Originally posted by Dalegas@12 August 2003 - 00:50
    Rperry:
    They are plugged in to the light green jack (the second one, from left to right)


    Is not an obvious solution when you are using heaphones like this.




    Is your head screwed on the right way ?

    Edit: Seriously though, there is often an option to swap left and right channels, but I think it is driver dependant so I can't tell you where to look.
    .
    Political correctness is based on the principle that it's possible to pick up a turd by the clean end.

  4. Software & Hardware   -   #14
    umm maybe the balance is set wrong... i got same sound card n itz right... maybe itz the file ur running!

  5. Software & Hardware   -   #15
    Originally posted by RPerry@11 August 2003 - 21:55
    I was going to offer a beer, but sounds like you might have had one too many
    very funny

  6. Software & Hardware   -   #16
    I dont want to turn my headphones.. I want a real solution!

  7. Software & Hardware   -   #17
    lynx's Avatar .
    Join Date
    Sep 2002
    Location
    Yorkshire, England
    Posts
    9,759
    Is all sound inverted, or only when you play a cd ?
    If only when you play a cd then it is probable that your cd audio cable in connected wrongly.

    What happens when you adjust the balance ? Does the wrong speaker get adjusted ?
    If it is the wrong speaker, you have a cabling problem.

    Does your m/board have a connector for front panel headphone socket? If so, this is probably where the crossover is occuring. There should be five or six wires - left and right feed, left and right return and 1 or 2 ground wires. The feed wires are reversed, but the return wires are correct.
    .
    Political correctness is based on the principle that it's possible to pick up a turd by the clean end.

  8. Software & Hardware   -   #18
    Originally posted by lynx@12 August 2003 - 12:46
    Is all sound inverted, or only when you play a cd ?
    If only when you play a cd then it is probable that your cd audio cable in connected wrongly.

    What happens when you adjust the balance ? Does the wrong speaker get adjusted ?
    If it is the wrong speaker, you have a cabling problem.

    Does your m/board have a connector for front panel headphone socket? If so, this is probably where the crossover is occuring. There should be five or six wires - left and right feed, left and right return and 1 or 2 ground wires. The feed wires are reversed, but the return wires are correct.
    Firts of all, the speakers are wrong, the cables are switched.. i guess I'll finally buy a 5.1 system. (not thos crappy 5 bucks speakers....).

    But let me answer you all those questions:

    Whe I tried the balance, the opposite speaker would response.

    My mobo is an intel D865PERL there's only the sound card, and the cd drive is only with the ide cable. when I played cd, it was the same, as the problem was about the speakers...


    Thx anyway.

    Greetings,
    Dalegas.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •