Shovel Ready
Originally Posted by SingaBoiy
I am going to heat the copper "screws" that come with cases. Then I should be able to stick em in the plastic spacers I made. Like a hot knife through butterUse the Weld-On to "weld" the spacers to the bottom of the case.
Drill and tap the proper hole.
Is this project going to be about the "easy" way of doing things?
"I am the one who knocks."- Heisenberg
Poster
I love easy.Drill and tap the proper hole.
Is this project going to be about the "easy" way of doing things?
Would it be better to drill the little spacers I made?
Shovel Ready
If you love "easy" why are you building a case from scratch?
Of course it would be better to drill/tap the spacers but I suspect that will be pretty difficult now that they're already cut out.
Ideally you would drill /tap the holes in a large piece and then cut them into individual units.
"I am the one who knocks."- Heisenberg
Go Snatch a Judge
Oh 5hit *Clocker hates easy. Another recommendation is that you can also use a "self Tapping/Self Drilling" screw, we use them all the time at work, use it first to make the threads in the plastic then use the screws you wishDrill and tap the proper hole.
Is this project going to be about the "easy" way of doing things?
Last edited by Detale; 05-16-2008 at 02:01 AM.
You better edit your post there D, I don't think clocker would appreciate being called that...
Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate
Shovel Ready
Meh.
"I am the one who knocks."- Heisenberg
Go Snatch a Judge
Just seen that sorry C fixed
You better edit your post there D, I don't think clocker would appreciate being called that...
Posting Permissions
Use the Weld-On to "weld" the spacers to the bottom of the case.
Reply With Quote
Bookmarks