Old Pc Having Problems After I Installed A 2nd Hd
(Click here to view the original thread with full colors/images)Posted by: apunkrockmonk
As soon as I installed the 2nd drive (It was out of an identical 2nd computer that bit the bullet). I believe the computer is a PI or PII 200mhz. Now when it turns on, reguardless of if only the original hd is connected, none are connected, or both are connected, it makes long beeps over and over until you unplug it, it doesn't start up at all.... any idea of whats wrong? And what if anything I can do to fix it?
Posted by: clocker
Check here (http://www.computerhope.com/beep.htm) to decipher your particular brand's beep codes.
Posted by: apunkrockmonk
could it be a bad psu by any chance? or if thats the problem does nothing happen at all when you try to start it?
Posted by: delphin460
i suggest you have knocked something when you installed the second drive
check all connectors and cable's to make sure they are all secure
check and see if all you pci , isa and agp cards are seated correctly, sometimes they creep up and are not sitting right
i assume you have checked the master / slave settings on both drives
Posted by: bigdawgfoxx
Yeah, check master and slave and reset CMOS will prob help.
Posted by: gungrave
check all the wires make sure there in full.
do u get any errors or any thing?
Posted by: delphin460
Originally posted by gungrave@22 April 2004 - 04:19
check all the wires make sure there in full.
do u get any errors or any thing?
are you obsessed with answering every post you read even when the exact same answer is already there
i suggest you have knocked something when you installed the second drive
check all connectors and cable's to make sure they are all secure
check and see if all you pci , isa and agp cards are seated correctly, sometimes they creep up and are not sitting right
i assume you have checked the master / slave settings on both drives
Posted by: gungrave
Originally posted by delphin460+22 April 2004 - 04:44--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (delphin460 @ 22 April 2004 - 04:44)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-gungrave@22 April 2004 - 04:19
check all the wires make sure there in full.
do u get any errors or any thing?
are you obsessed with answering every post you read even when the exact same answer is already there
i suggest you have knocked something when you installed the second drive
check all connectors and cable's to make sure they are all secure
check and see if all you pci , isa and agp cards are seated correctly, sometimes they creep up and are not sitting right
i assume you have checked the master / slave settings on both drives
[/b][/quote]
no i just wanted 700 posts :rolleyes:
Posted by: tesco
Originally posted by gungrave+22 April 2004 - 00:09--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (gungrave @ 22 April 2004 - 00:09)</td></tr><tr><td id='QUOTE'> Originally posted by delphin460@22 April 2004 - 04:44
<!--QuoteBegin-gungrave@22 April 2004 - 04:19
check all the wires make sure there in full.
do u get any errors or any thing?
are you obsessed with answering every post you read even when the exact same answer is already there
i suggest you have knocked something when you installed the second drive
check all connectors and cable's to make sure they are all secure
check and see if all you pci , isa and agp cards are seated correctly, sometimes they creep up and are not sitting right
i assume you have checked the master / slave settings on both drives
no i just wanted 700 posts :rolleyes: [/b][/quote]
:lol:
Posted by: apunkrockmonk
Computer is at my gfs house... I haven't had a chance to go back there, I will be going back saturday. You must've imagined how embarrised I was when I popped in the drive and it wouldn't boot again... not to mention I had to leave right then so I couldn't really do anything about it. Thanks for the help, I'll tell you how everything goes.
Edit: Will I have a hard time figuring out how to reset the CMOS.... she definately doesn't have any instruction manuals or anything.
Posted by: Chewie
If you don't see the video BIOS display before the beeps, then remove and reseat the video card.
If you do see the video BIOS display, remove and reseat the RAM.
The beeps are a code. Go to the BIOS manufacturer's site (they put a sticker on the BIOS chip) and check their error codes.