Alcohol120 problem

[otaku32]

hey everyone, im having a huge problem w/ alcohol120. Whenever i try to burn a DVD now (im using DL DVDs and this is the 1st time ive run into this problem) it burns up to about 50%-75% and then says there's a error, and it ejects the disk. :frusty:

Here is the log

####################### Dumping/Recording Progress Log #######################
********* Time stamp of this log file: 7/18/2006 2:49:47 PM *********
14:49:47 Processor info: AMD Athlon(tm) XP 3200+ (2204MHz)
14:49:47 Memory Available to Windows: 458,224 KB
14:49:47 Memory Buffer size: 128 MB
14:49:47 Image file loading: C:\Documents and Settings\Mike\My Documents\ISOfolder\2 fukin big\Intial D Battle 1.ISO
14:49:47 DVD Source Info: Session: 1, Track: 1, Length: 7.50 GB / 874:20:44
14:49:57 (D: ) LITE-ON DVDRW SOHW-832S(1:0): Recording Method/Speed
14:49:57 Recording - DVD DAO - 2.3X (3185 KB/Sec)
(D: ) LITE-ON DVDRW SOHW-832S(1:0) - Media format: DVD+R , Double Layers
15:25:36 (D: ) LITE-ON DVDRW SOHW-832S(1:0) - [Write ERROR] LBA: 1971968, Length: 16
S:KEY - 03/0C/00 - "Write Error"
15:25:36 (D: ) LITE-ON DVDRW SOHW-832S(1:0): Recording failed!
15:25:36 Error message: [03/0C/00] - Write Error
15:25:36 (D: ) LITE-ON DVDRW SOHW-832S(1:0): Recording failed!
15:25:36 Image file loading aborted!
15:25:38 Something is wrong with the recording procedure! Please check the log file and report any errors to Technical Support.
##############################################################################

Much thanks to anyone that can help.

[RealitY]

Might be long shot but know some rarely reboot and whenever Ive had an issue with a DVD like that a quick reboot solves it. Cant suggest much more than that other than maybe asking at thier forums...

[Virtualbody1234]

What media are you using? It could be defective.

Also... I recommend that you use DVD Decrypter to burn ISO (mode>ISO>write).

[Appzalien]

Have you tried slowing down your write speed to see if thats causing the error.

[FreeDoom]

If the error is at 50%, it's defective media or a problem with the drive when it's starting to burn on the 2nd layer. When it passes 50%, it becomes inconstant between 1X and 3X until fail?
It could be a laser calibration problem also and if it's that, there's nothing to do but buy a new one or if it's in warranty period, get a new one

Have you tryed to update the firmware?
Also try DVD Decrypter for ISO burns.

Be cool :cool:

[dodgy368]

Can someone plese post Alcohol 120%. thanks
http://www.alcohol-soft.com/

[Appzalien]

Google "Layer Break Error" and see what you find.