Matrix Reloaded Chakra Svcd Cd1

[Aborted]

Ok, so i got the Matrix Reloaded Chakra SVCD CD1 . Problem is what to do next, i know i can put it on too a CDR because the duration is under 80 minutes . They are in a .bin and .cue file . So i opened the .cue file in Nero, and burnt the .cue sheet . I put it in to my player and it said 'Bad Disk' . Any ideas on how to do it ?

[jetje]

i did it with alcohol120% worked well...

[Nevin]

It's in Pal format, and your DVD player probally isn't multiregion so it wont' be able to play it. You have 2 options:
#1) Extract the Mpeg using VCDgear and watch it on your computer.
or #2) Follow this guide (http://www.dvdrhelp.com/forum/userguides/166237.php) to convert it to NTSC and then it will probally work on your DVD player. <--- this is what I did

[ApacNTS]

yeah that program is great, but i hope you have a relativly fast computer, cause conversion could take days if you dont.

[ehnoismemu]

Problem is what to do next, i know i can put it on too a CDR because the duration is under 80 minutes
80 minutes is the maximum time for an AUDIO (STEREO) CD.

For data CD&#39;s, that kind of CD maximum storage is ~ 700MB.

If you burn a VIDEO CD (VCD/SVCD) on it, it can store more than 800MB of VIDEO data.

[Gre1]

If you burn a VIDEO CD (VCD/SVCD) on it, it can store more than 800MB of VIDEO data.

The max is 800 mb no more.

[gumbydancin]

Originally posted by Gre1@17 August 2003 - 23:17


The max is 800 mb no more.
Well that statement is just pure fiction my boy.

[NotoriousBIC]

Originally posted by Aborted@17 August 2003 - 16:56
Ok, so i got the Matrix Reloaded Chakra SVCD CD1 . Problem is what to do next, i know i can put it on too a CDR because the duration is under 80 minutes . They are in a .bin and .cue file . So i opened the .cue file in Nero, and burnt the .cue sheet . I put it in to my player and it said &#39;Bad Disk&#39; . Any ideas on how to do it ?
Does your burned cd play on the PC? (You may have to install the K-Lite codec pack first)

If so, then you&#39;re sure your CD is fine. Then there are 2 posibilities:
1) You have a NTSC system -> follow Nevins instructions
2) Your DVD-Player doesn&#39;t support SVCDs -> buy new DVD-player ;)

If it does not play:
1) Your .bin file is corrupted: Try &#39;mounting&#39; your image using Alcohol120%. This creates a virtual Cd-drive with that .bin file &#39;inserted&#39; as a true cd.
2) The CD itself is damaged: Follows deductively from the previous test. Try burning it again with other software like Alcohol120% for example.

[Nevin]

Does your burned cd play on the PC? (You may have to install the K-Lite codec pack first)

If so, then you&#39;re sure your CD is fine. Then there are 2 posibilities:
1) You have a NTSC system -> follow Nevins instructions
2) Your DVD-Player doesn&#39;t support SVCDs -> buy new DVD-player&nbsp;

If it does not play:
1) Your .bin file is corrupted: Try &#39;mounting&#39; your image using Alcohol120%. This creates a virtual Cd-drive with that .bin file &#39;inserted&#39; as a true cd.
2) The CD itself is damaged: Follows deductively from the previous test. Try burning it again with other software like Alcohol120% for example.

:D I just assumed he had the same problem that I had, I&#39;m sure glad I read the forums at vcdquality.com and found out it was in Pal so I dind&#39;t waste 3 cd&#39;s.

Good luck to you Aborted. oh and try VCD Help.com (http://www.vcdhelp.com) to see if your DVD player supports SVCD&#39;s.