Guide To Port-forward

[TheFilePirater]

How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

http://www.chinkii.com/uploads/album/ladies/gateway.JPG

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album/ladies/adress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

http://www.chinkii.com/uploads/album/ladies/setup.JPG

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

http://www.chinkii.com/uploads/album/ladies/advanced.JPG

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

http://www.chinkii.com/uploads/album/ladies/ports.JPG

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)

[aizlumzan]

Thnx a lot. I just did whatever you said now i will put on test.

[ForbiddenDNA]

Originally posted by aizlumzan@9 December 2003 - 21:47
Thnx a lot. I just did whatever you said now i will put on test.
Don't trust people this day. It might mess up your downloading speed really bad. :lol:

But, i'm waiting for other people to reply the results..

Hope it works..I WANT TO DOWNLOAD FASTER!!

[CornerPocket]

Of course it works! Ever wonder why your lights are yellow??

Nice tip and a common question asked by many, moving there. Think it demonstrates a good example as to how to Port Forward. B)

[far]

Im using netopia porter...Pleae spmeone tell me how to port forward with this

Thanx

[TheFilePirater]

pinned!!! :wub:

EDIT: Far, do you have adobe acrobat?? if so, then your complete portforward guide is right here (http://mkruse.netexpress.net/support/pinhole.pdf)

[far]

Where so I check if I have adobe acrobat??...I tried that site u gave me..But when trying to write the pin adress in the adress bar I get a error

[TheFilePirater]

ur gonna have to find ur GATEWAY IP then..on my guide do step 1-2

[far]

done "BELKIN 4 POURT ROUTER"
IS THERE A GUIDE FOR THIS ONE TOO?? ...IM NOT SURE WHAT TO DO FROM HERE

THANX FOR UR HELP

[TheFilePirater]

lol,try out bt, see if u notice any improvements, ill find a guide for ur belkin

EDIT: here (http://homepage.ntlworld.com/j.buchanan/index.html?routers-belkin-4port.html) is a guide for the belkin, its made for winMX but im sure you can figure it out (just replace winmx ports with BT)

[far]

thanx man....I didnt do anything except typind the ip in the adress bar....why should I try BT now?

[far]

My Webpage (http://192.168.2.1/fw_virt.html)

what should I write in there?.......Dunno where to find my private port ;)
Man this is difficult

[aizlumzan]

Filepirater:: i think its working...

[isepiq]

Yes, port forwarding works. I use it on all of my p2p proggies, including BT.

Very nice guide. B)

[Lenuin]

Ok, i did my port forwarding with my linksys. my BT still has a yellow light?

[Will_518]

Does this work with USB modem? Is there a similar trick for USB?

[Wizzandabe]

Sp your Gateway is 1.1 that makes you 1.2 ;)

[Wizzandabe]

Originally posted by Will_518@16 December 2003 - 12:32
Does this work with USB modem? Is there a similar trick for USB?
No need to forward ports for a modem. :)

[Samurai]

Originally posted by Lenuin@15 December 2003 - 09:29
Ok, i did my port forwarding with my linksys. my BT still has a yellow light?
Are you sure you followed the instructions to the letter. Unfortunately, when I bought my Linksys Router, there wasn't any helpful guides like this so I had to learn the hard way.

Once you have typed in your 'Gateway Address' and input your password, default is 'admin' and user name is to be left blank.

Click on the 'Advanced' tab on the top right corner, then click on 'Forwarding' which appears as a new tab.

Now here is where mistakes can be made... Don't just put your TCP and UDP Port numbers in the spaces provided and think that it's done. There is also a button called 'Port Triggering' funnily enough. Input the same data. Save.

Now, I recommend rebooting the machine and going back to your Linksys Diagnostic page, and seeing if it has been saved correctly. Try now. It should be working.

Samurai :ph34r:

[mike2]

Hmmm...Does anyone know how to do this with an "INTRACOM" ADSL router?

This is how my menu looks (http://www.vbforums.com/attachment.php?s=&postid=1573791)

What should i click?
:helpsmile:

Thanks in advance :)

[mooseman2070]

wow, thanks, all green lights

[dinalee]

hi.. i'm using Aztech DSL305E ADSL Ethernet Bridge Modem and tried the steps in forwarding the port.. but it seems that the connection is still yellow. can anyone help me out with my problem pls? thanks in advance.. :)

[kungen]

Hi..when i try put my default gateway number in the browser nothing happens..so i guess i don't have any router then right?but i still have yellow light... :frusty: :angry: so what can i do?is there something else?

[jumpmonkey]

:helpsmile: does anyone know how to port forward on a MENTOR ADSL ROUTER it has an onboard modem and the user manual was written by a martian on crack!
someone please, its driving me f*cking nuts :frusty:

[meth21]

anyone know how to port forward on a microsoft wireless base station??? i kno where to go but it asks for private ports?? and outbound ports?? on each port foward set up. what do i put for those ports??? thanks.

[NotoriousBIC]

This is a simple test to look if you're behind a router, NAT, firewall or if you've configured them correctly.
Go to the following link:
http://btfaq.com/natcheck.pl

Instructions on how to use it are on the page.

[Erus]

Thanks a bunch!

Also, for the belkin, I don't think you can set a range, you have to put each port in manually, but it's working great.

[NotoriousBIC]

May I add, that if you use the newest Azureus (2.0.7.0) you will only need to forward port 6881

[h121589]

i did that and it said 401 Unauthorized
and i have a D-Link Router

[lightshow]

For anyone who can't get this to work and have a D-Link Router versions:

DI-514, DI-524, DI-604, DI-614+, DI-624, DI-704P (revC), DI-754, DI-764, DI-774
DI-704P (revB), DI-704UP, DI-707P, DI-714P+, DI-804HV, DI-808HV, DI-824VUP
DI-704P (revA), DI-704, DI-707, DI-711 (revA), DI-713, DI-713P

Go here (http://support.dlink.com/faq/view.asp?prod_id=1347#604). This is the official D-Link Faq for how to foward ports for bittorent (any client). It's very simple :lol: .

[sameer0807]

i m usin BARRICADE SMC7004VWBR router...how do i forword ports wid dat??

Plz help

[sameer0807]

and i m usin D-Link DSL-300G ADSL Modem for the second PC...i would like to know how to forward ports for both the modems.

Please help!! :helpsmile:

[NewBie40]

Hi all. I have Prestige 642ME-11 and i cant login with the admin password. Any ideas???

http://server6.uploadit.org/files/NewBie40-sas1.JPG

[NewBie40]

anybody????

[junkyardking]

Try

User name - admin

Password - password

[NewBie40]

didnt work :( but thanks anyway :D

[internet.weather]

Press the reset button to put it back to factory settings, then the defaults will work.

You will have to reconfigure it afterwards though.

Edit leave the username blank and try admin as password.

[zedsded]

Thank you very much for the simple tutorial. It made a huge difference.

[ilw]

Just thought i'd add my 2 cents, if you've forwarded the ports as described and you still have problems try turning off the option to block anonymous internet requests (if your router has the option)

[ReD-BoXeR]

Hi Guys
first of all i dont know anything about this so i need help.
I tried first step and i got my Gateway IP I open a new internet explorer but when i type the Gateway IP I get to nineMSN search and it says We can't find what you are searching whats the problem can you plz help

[ReD-BoXeR]

Originally posted by TheFilePirater@10 December 2003 - 03:30
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

Image Resized
http://www.chinkii.com/uploads/album/ladies/gateway.JPG' width='200' height='120' border='0' alt='click for full size view'> ('http://www.chinkii.com/uploads/album/ladies/gateway.JPG')

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

[img]http://www.chinkii.com/uploads/album/ladies/adress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

Image Resized
[img]http://www.chinkii.com/uploads/album/ladies/setup.JPG' width='200' height='120' border='0' alt='click for full size view'> ('http://www.chinkii.com/uploads/album/ladies/setup.JPG')

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

Image Resized
[img]http://www.chinkii.com/uploads/album/ladies/advanced.JPG' width='200' height='120' border='0' alt='click for full size view'> ('http://www.chinkii.com/uploads/album/ladies/advanced.JPG')

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

Image Resized
[img]http://www.chinkii.com/uploads/album/ladies/ports.JPG' width='200' height='120' border='0' alt='click for full size view'> ('http://www.chinkii.com/uploads/album/ladies/ports.JPG')

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)
after step 6 there is pic on about linksys what are these a program? is linksys a port-forward or firewall program????

[ilw]

linksys is the brand of router, each router manufacturer uses their own brand of firmware (software installed in the router) so your router will display a different looking page.

[Immortal Genocide]

Do you have a guide for the Speedtouch 510 router?

[Wizard_Mon1]

Quick question, do you think that port forwarding would work for a uni firewall and do you think they would be able to find out or that they would care.

I don't want to fuck with it if they won't like it and they can find out. :ph34r:

I would be grateful for any help as at the moment on this comp i can only use klite which is not so good.
:(

[tempochan]

when i try to do port fowarding and open internet explorer and type in my gateway ip it tells me it cant find the server

[Wolfmight]

your images were nocked offline.. get em back

[Cool_Guy]

ummm i have two lights on...one green which is flashing and a yellow which doesn't flash...is everything alright here?

[vegeta]

Originally posted by TheFilePirater@10 December 2003 - 04:38
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

http://www.chinkii.com/uploads/album/ladies/gateway.JPG

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album/ladies/adress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

http://www.chinkii.com/uploads/album/ladies/setup.JPG

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

http://www.chinkii.com/uploads/album/ladies/advanced.JPG

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

http://www.chinkii.com/uploads/album/ladies/ports.JPG

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)
none of the imgs seem to work for me.

[trixr4kiddz]

can someone help me?
do i check TCP or UDP?
and for my IP address do i leave the 0 at the end or put the real number of my ip address on there?

[ilw]

TCP is more common for file sharing programs & put in your real network ip address.

[anxies]

Originally posted by TheFilePirater@10 December 2003 - 03:38
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

http://www.chinkii.com/uploads/album/ladies/gateway.JPG

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album/ladies/adress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

http://www.chinkii.com/uploads/album/ladies/setup.JPG

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

http://www.chinkii.com/uploads/album/ladies/advanced.JPG

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

http://www.chinkii.com/uploads/album/ladies/ports.JPG

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)
Right call me dumb but i just dont get this can someone explain to me a bit better. Its line 3 and actually finding the ports on my system that is getting to me i'm pretty new to this and i just cant figure it out help anyone. :rolleyes:

:huh: :(

[ilw]

do you mean point 3? If so your gateway ip address is the network ip address of your router. ie the ip to log into your router. (probably 192.168.x.1 where x is either 0, 1 or 2). if you don't know your routers ip address open up command prompt (point 2 in the quoted list) and type in "ipconfig" without the quote marks. That should then tell you your gateway ip.


Finding the ports to forward is done by either checking the program's options (the program you are trying to forward ports for) or by looking on the internet to find out which ports a program uses. Normally you can choose which ports a program uses in options/preferences/settings.

If your stuck it may be better to make a new topic in the main bittorrent section because this topic doesn't get checked anywhere near as much

[shn]

Originally posted by trixr4kiddz@11 July 2004 - 12:46
can someone help me?
do i check TCP or UDP?
and for my IP address do i leave the 0 at the end or put the real number of my ip address on there?
make sure your on the same subnet as your router. do the ipconfig /all and make sure your octets match the gateway/dns server of your router. If the router address is 172.16.0.1 and your on anything else other than 172.16.1.x then you won't be able to connect to your router unless you spoof it.

btw, this guide is not that helpful. Well it is a little bit but not everyone has a shitty lynksys or a similar admin control panel.

n/m

[muchspl2]

:lol:

why not just post a link to http://www.portforward.com
how to forward all routers, well enough to look at a similer model (if your is not listed) and figure out




2 Wire

1000HW
1000S
1000SW

3com

3C510
3C855
3C857
3CR856-95
3CR860-95
3CRWE51196
3CRWE52196
3CRWE554G72
3CRWE754G72
WL-540

Actiontec

GT701-WG
R1020S
R1020S(U)
R1520SU
R1524SU
R1524SU-1

Apple

Airport Base Station
Airport Base Station OS X

Artnet

RTA-230 ADSL

Asante

FriendlyNet FR1004
FriendlyNet FR1004AL
FriendlyNet FR1104-G
FriendlyNet FR3002AL
FriendlyNet FR3004
FriendlyNet FR3004C
FriendlyNet FR3004FLC

Aztech

DSL305EU
DSL600EU
DSL906EU
DSL1100R

Belkin

F5D5230-4
F5D5231-4
F5D6230-3
F5D6231-4
F5D6231-4 Version 2
F5D7230-4
F5D7630

Benq

AWL700
ESG103

Billion

Bipac 5100W
Bipac 640AE
Bipac 640SE
Bipac 643
Bipac 740 GE
Bipac 741
Bipac 743
Bipac 7025 AE
Bipac 7100S

Binatone

ADSL 2000
ADSL 2001

Blitzz

BWA611
BWA611B
BWA711

bRoad Lanner

BRL-04FXP

Buffalo

Airstation WBR-G54

Cisco

675
678

Compaq

iPAQ CP-2W

CompUSA

CompUSA Soho

Comtrend

CT-561

DABS

DABS Value Router

Dell

True Mobile 2300

D-Link

DI-514 rev a,b,c
DI-524
DI-604
DI-604 version 2
DI-614+ rev a&b
DI-624
DI-624+
DI-704
DI-704P revision a
DI-704P revision b
DI-704P revision c
DI-704UP
DI-707
DI-707P
DI-711
DI-713
DI-713P
DI-714
DI-714P+
DI-724
DI-754
DI-764
DI-774 rev a&b
DI-784
DI-804
DI-804HV
DI-804V
DI-808HV
DSL-302G
DSL-500
DSL-500G
DSL-504
DSL-504G
DSL-604+
DSA-3100


Draytek

Vigor 2200E
Vigor 2600WE

Efficient

SpeedStream 2510
SpeedStream 2524
SpeedStream 2602
SpeedStream 2604
SpeedStream 2614
SpeedStream 2623
SpeedStream 2624
SpeedStream 5100
SpeedStream 5200
SpeedStream 5400
SpeedStream 5500

Etec

PT-3808
PT-3810
PT-3812
PT-3816
PT-3818
PT-3830

Gateway

DCW615R
WBR-100
WGC-220
WGR-200
Wireless-G
Wireless Cable Gateway

Inexq

BR400
ISW050U

Intracom

jetSpeed 500 Version 2
jetSpeed 500i Version 2
jetSpeed 520 Version 1
jetSpeed 520i Version 1

Jaht

EA-2104G

Lectron

Pragmatic AR800C2

Level One

FBR-1100TX
FBR-1400TX
FBR-1401TX
FBR-1402TX
FBR-1403TX
FBR-1405TX
FBR-1405TX version 3
FBR-1406TX
FBR-1407A
FBR-1407B
FBR-1409TX
FBR-1411TX
FBR-1413TX
WBR-1100TX
WBR-1400TX
WBR-2400TX
WBR-2401A
WBR-2401B
WBR-3400TX
WBR-3400TX Version 2
WBR-3402 version A & B
WBR-3403TX
WBR-3404TX

LinkSys

BEFDSR41W
BEFSR11
BEFSRU31
BEFSR41 V1 & V2
BEFSR41 V3, V4 & V5
BEFSR41-CA
BEFSR81
BEFSX41
BEFSX41-CA
BEFVP41 V1 & V2
BEFVP41-CA
BEFW11P1
BEFW11S4
BEFW11S4 v2, v3, & v3.2
BEFW11S4 V4
BEFW11S4-CA V2 & V4
WRT51AB
WRT54G
WRT54G v1.1, v2 & CA
WRT55AG
WRV54G
WRV54G-CA

MaxGate

UGate-3000
UGate-3200
UGate-3200P
UGate-3300
UGate-Plus

Microlink

Microlink DSL router

Microsoft

Base Station MN-100
Base Station MN-500
Base Station MN-700

Motorola

BR700
SBG900
WR850G

Multitech

RouteFinder RF560VPN

Network Everywhere

NR041 Cable/DSL
NWM11B Wireless
NWP11B Wireless
NWR04B Wireless
NWU11B Wireless

Netcomm

NB1300 ADSL
NB2800 Cable/DSL
NB3000 Wireless
NB3100 Firewall
NB3100C Firewall
NB3200 Cable/DSL
NB3300 ADSL
NB5540 ADSL
SM4300 SmartAccess

Netgear

CG814W
DG814 v4.0
DG814 ver 4.3, 4.4, & 4.7
DG824M v1.3 & v1.4
DG834
DG834G
FM114P
FR114P
FR114W
FR314
FR318
FR328S
FV318
FVL328
FVS318
FVS328
FWAG114
FWG114P
HR314
MR314
MR814
MR814v2
RO318
RH340
RM356
RP114
RP614
RP614v2
RT311
RT314
RT388
WGR614
WGT624 v1 & v2

Origo

ASR-8400
ASR-8400 version 2

Planet

ADE-3000
ADE-4000
ADE-4120A
ADE-4120B
ADE-4200
ADW-4100A v1 & v2
ADW-4100B v1 & v2
ADW-4200
ADW-4300

Prolink

Hurricane 9000
Hurricane 9000P
Hurricane 9000W

PTI

PAE-CE84

Q-Tec

584AA
585AB
773WR
778WR v1
778WR v3
790RH

Repotec

RP-IP2014

Shock

741A

Siemens

Gigaset Cable / DSL
Gigaset SE105
Gigaset SE505

Sitecom

DC-200
DC-201
DC-202
DC-202 version 2
DC-203
DC-213
DC-214
DC-215
DC-216
WL-014
WL-017
WL-025
WL-106
WL-108
WL-109
WL-122

SMC

2404WBR
2804WBRP-G
2804WBR version 1
2804WBR version 2
7004ABR
7004AWBR
7004BR
7004BR version 2
7004FW
7004VBR
7004VWBR
7004WBR
7004WFW
7008ABR
7008BR
7204BRA

Solwise

SAR130

Speedcom

ART18CX

Surecom

EP-9510AX

Sweex

Adsl Annex A
Adsl Annex B
Adsl Wireless Annex A
Adsl Wireless Annex B

Thomson / Alcatel

3881
Speedtouch 510 v4.0
Speedtouch 510 v4.2
Speedtouch 510 Alt
Speedtouch 530
Speedtouch 540
Speedtouch 545
Speedtouch 570 v1.0
Speedtouch 570 v2.0
Speedtouch 570 v4.2
Speedtouch Firewall

Topcom

Skyracer WBR244
Skyracer WBR254
Skyracer WBR611
Skyracer Pro WBR654

Toshiba

WRC-1000

Trendnet

TEW-431 BRP

Trust

Speedshare Turbo Pro

Uniden

ENR1504
WNR2004

U.S. Robotics

USR8000
USR8000A
USR8000A-02
USR8000A-03
USR8003
USR8011
USR8022
USR8054
SureConnect 9106

Voip

ESC1710

Web Excel

PT-3812

Westell

Bellsouth B90-220030-04
2100 Wirespeed
2200 Wirespeed
2400 Wirespeed
2410 Wirespeed
36R570-01 Wirespeed

Xavi

8021R ADSL

Zonet

ZSR0104B
ZSR0104CP

Zoom

5551 ADSL
5554 ADSL
5560 ADSL

ZyXel

Prestige 623
Prestige 623-41
Prestige 623ME
Prestige 623R-A1
Prestige 623R-T1
Prestige 643
Prestige 645M
Prestige 645M-A1
Prestige 645R
Prestige 645R-A1
Prestige 645R-A2
Prestige 650
Prestige 650H
Prestige 650HW
Prestige 650R-33
Prestige 652
Prestige 653HWI
Prestige 681
Prestige 782
Prestige 791
ZyAIR B-2000 v1
ZyAIR B-2000 v2
ZyAIR G-2000
ZyWall 1
ZyWall 2
ZyWall 2WE
ZyWall 10
ZyWall 50
ZyWall 70
ZyWall 100

[shn]

The easiest less tedious way would just be to forward "all" ports to your box, get a personal firewall and make that machine dmz. :)

[silent h3ro]

How do you do the reset thing?
Nevermind

[mikenmike0001]

can you reuploaded the pics from the first post?

[krome]

Originally posted by TheFilePirater@9 December 2003 - 19:31
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

http://www.chinkii.com/uploads/album/ladies/gateway.JPG

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album/ladies/adress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

http://www.chinkii.com/uploads/album/ladies/setup.JPG

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

http://www.chinkii.com/uploads/album/ladies/advanced.JPG

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

http://www.chinkii.com/uploads/album/ladies/ports.JPG

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)
i cant see the pics that show how to set it up, mind uploading them again please i need this to work?

[Mmdott]

Well I'm not really new at bittorent but i just didn't mind the speed lol its from 5kbs-8kbs sometimes it goes down to 0.8 kbs. I have a network everywhere router im not sure if i have a firewall? maybe the window xp one , and norton anti-virus i forward my ports but the light never turns green im using azureus.
When i forward my port there was something like
Customize program: I wrote Torrent
Ext. Port: 6881
There was a box to check the Tcp i check it
Int.Port: 6889
then wrote my ip addres
and checked enable
If any wondering what it looks like write
http://192.168.1.1/ blank for username admin pass
thats all i did to try and make my torrent download go faster is there anythign im doign wrong ?
Thanks in advance

[Burre]

For anyone who can't get this to work and have a D-Link Router versions:

DI-514, DI-524, DI-604, DI-614+, DI-624, DI-704P (revC), DI-754, DI-764, DI-774
DI-704P (revB), DI-704UP, DI-707P, DI-714P+, DI-804HV, DI-808HV, DI-824VUP
DI-704P (revA), DI-704, DI-707, DI-711 (revA), DI-713, DI-713P

Go here (http://support.dlink.com/faq/view.asp?prod_id=1347#604). This is the official D-Link Faq for how to foward ports for bittorent (any client). It's very simple :lol: . I just love running into the answers I need. thx a bunch!!!

[Burre]

Hmmmmm.... It worked a while, but then the port test in emule failed again... Can someone tell me where I can find my IP, so I can verify? :(

[Benno]

you mean your lan ip?

go to run and type cmd
then in the dos windows that pops up type ipconfig this will show your ip

However you have to mame sure your router gives you the same local ip everytime you connect to it.

[Coma967]

My message was not too short. what the hell is this crap. i tried to post it like 3 times. annoying.

[Coma967]

lets see again then. Im new to filesharing Talk. I have a Linksys NR041. Im trying to use my HFS server. Attempting step 3. Im not getting the username: password thing to pop up. So... Will that happen even if i dont have a router hooked up to the computer right now ?

[ModemUser]

I'm a Modem User, When I type my IP from http://whatismyip.org[my Lan IP doesn't WORK!]on IE, I already typed Admin or Admn, the password is 1234, It won't WORK!