PDA

View Full Version : Modding



Duffman
01-07-2004, 09:42 PM
well, i did realize that my comp is running a little high on temps so im gonna buy some fans what not cables, so heres my budget no more that say 40$, well my first question is the stock cooling on a pacakge pc is usually not great right? if so i wanna replace the hsf cause it is incredably loud, a new 80mm case fan because theres a hole for one but there isn't one, replace my ide cables with round ones and maybe replace the psu fan if thats possibe, i did check newwegg but before i buy there and help would be nice, as companys do tend to rip you off on accesories if your no at the right store

Virtualbody1234
01-07-2004, 10:00 PM
Spend your money on a case fans first then maybe a fan adaptor to put a 80mm fan in your CPU. Round cables last (least important).

What CPU are you trying to cool?

Duffman
01-07-2004, 10:02 PM
oops sorry about that amd palamino xp 1800

RGX
01-07-2004, 10:42 PM
Are you planning to overclock?

racer II
01-07-2004, 11:02 PM
Originally posted by Duffman3@7 January 2004 - 23:02
oops sorry about that amd palamino xp 1800
I do believe that the palamino is a real hot head ;) but this cooler should be just right for you : http://www.spirecoolers.com/fcc.asp?ProdID=105 its cooling my other computer which is an xp2000 with 3 case fans (80x80) one on the front side one on the back side, and i cut a hole in the side pannel and added the 3th fan so it blows directly towards the cpu cooler.
And the cpu cooler is realy quiet. (21.1 dba)

_John_Lennon_
01-08-2004, 03:34 AM
If you get that fan, be sure to take off the *flashy* metal guard.

It will quiet the fan down even more.

johnboy27
01-08-2004, 03:46 PM
Originally posted by racer II+8 January 2004 - 00:02--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (racer II @ 8 January 2004 - 00:02)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Duffman3@7 January 2004 - 23:02
oops sorry about that amd palamino xp 1800
I do believe that the palamino is a real hot head ;) but this cooler should be just right for you : http://www.spirecoolers.com/fcc.asp?ProdID=105 its cooling my other computer which is an xp2000 with 3 case fans (80x80) one on the front side one on the back side, and i cut a hole in the side pannel and added the 3th fan so it blows directly towards the cpu cooler.
And the cpu cooler is realy quiet. (21.1 dba) [/b][/quote]
Yes the Palomino&#39;s do run hotter than the thoroughbread processors I find.I went from an XP2200+ (RIP) to an XP1900 Palomino and I noticed an increase of about 5 degrees celcius under a load.i hate the fact that it runs hotter,I am contemplating going watercooled.

Virtualbody1234
01-08-2004, 06:11 PM
Originally posted by johnboy27@8 January 2004 - 09:46
I went from an XP2200+ (RIP) to an XP1900 Palomino
What happened to your 2200+ ?