PDA

View Full Version : Software Speed UP Boot and Start Up Time of XP



100%
10-25-2004, 03:20 PM
I have been unable to find a single site that has all the Speed Up Boot Tricks together in One Section

Alot of Different Sites\Threads\Opinions confirm the below tricks
To my knowledge these are all Legitimate
Remember to backup and be cautious if doing registry tweaks-
I am not responsible for any damage
These tweaks are directed at Windows XP users
So here you go.....

GENERAL RULE
The Less Windows has to Load up and Perform at Startup the Better
&
If you do not know what it is....
Leave it alone


HOW TO IMPROVE YOUR BOOTUP \ STARTUP TIME
__________________________________________________________________


USEFUL TOOLS
TUNEXP has a simple boot speed up tool http://www.driverheaven.net/dforce/showdoc...oc=txp_download (http://www.driverheaven.net/dforce/showdoc.php?doc=txp_download)
MSCONFIG - Go to 'start\run' and type msconfig
SERVICES - Goto> Control Panel > Administrative Tools > Services
TASK MANAGER - Press Ctrl-Alt-Delete
GROUP POLICIES MANAGER - Goto>Start>Run type in gpedit.msc>click ok (useful tool for many tweaks)(available only to XP Pro)
DEFRAGMENTER - Programs-Accessories-System Tools-Disk Defragmenter
BOOTVIS - http://www.soft32.com/download-BootVis-19687-5.html
STARTUP CONTROLLER Panelhttp://www.mlin.net/StartupCPL.shtml
REGISTRY CLEANER - look in software forum for best registry cleaners
CCLEANER http://www.ccleaner.com/
ADAWARE - http://www.lavasoftusa.com/software/adaware/
XPLITE (removes items from xp -use with some caution)http://www.litepc.com/xplite.html
O&O DEFRAGGER V6.5 helps at shortening the boot - http://www.oo-software.com/en/products/oodefrag/pro.html
Cacheman - http://www.outertech.com/index.php?downloa...&imageField.y=9 (http://www.outertech.com/index.php?download=10&imageField.x=4&imageField.y=9)



FASTEST REBOOT - KILL EXPLORER.EXE
This is the fastest way to Refresh (reboot) explorer.
Instead of completely rebooting because of system crash or new registry input or other reasons.
simply
Press Ctrl-Alt-Delete (at the same time)
OR
on an empty space on the Taskbar >right click it > click Task Manager

then in the Task Manager window
Right Click on Explorer.exe
end process
click yes
(explorer items will disappear)
then click on File in the menu
New Task
Type in explorer.exe
ok
explorer and the registry will then be freshly reloaded


FAST REBOOT II - DON'T..
Simply Don't reboot....
Either put it on Standby or Hibernate
Only reboot unless you need to because of software hardware changes
Tip from this thread http://www.neowin.net/forum/index.php?show...=180494&hl=boot (http://www.neowin.net/forum/index.php?showtopic=180494&hl=boot)
***The Hibernation option uses system resources so turn it off as it also uses alot of space***
(To disable Hibernation goto power options>Hibernate>unmark enable)


TUNEXP all in one speeduper
Many people have mentioned that Tunexp has an all in one system optimizer which seems to speedup booting
havent tried it but im sure its good
http://www.driverheaven.net/dforce/showdoc...oc=txp_download (http://www.driverheaven.net/dforce/showdoc.php?doc=txp_download)

http://img.photobucket.com/albums/v173/sjoko/Capture_01032005_163324.jpg
http://img.photobucket.com/albums/v173/sjoko/Capture_01032005_134453.jpg



BASICS
_______________________________________________________

REMOVE JUNK FILES before Shutting down
By removing junk- the windows registry and system won’t have to load them up on reboot.
Use a Junk temp Cleaner like CCleaner http://www.ccleaner.com/, window washer, etc (see software forum for more)
to remove junk from your system before you shutdown.

"I found that creating a script to run on shutdown that deletes the temp folder and history shaved 2.5 seconds on my boot time, down to 1.5 secs.
Create a batch file by doing the following:
1) Open notepad and enter the following lines:
RD /S /q "C:\Documents and Settings\"UserName without quotes"\Local Settings\History"
RD /S /q "C:\Documents and Settings\Default User\Local Settings\History"
RD /S /q "D:\Temp\" <--"Deletes temp folder, type in the location of your temp folder"
2) Save the file and then rename is something like deltemp.bat
3) Now click Start, Run and type in gpedit.msc --->Computer Configuration --->Windows Settings --->Scripts and double click on Shutdown
--->Click Add and find the batch file you created and press ok to set the script"
submitted by Gabe http://tweakxp.com/tweak1822.aspx


Clean your Registry
Use a registry cleaner occasionally - will help for faster load up and general performance - the cleaner your registry the faster it loads.
(CCleaner also does the basic cleaning-look in software forum for others).


Defragment your Harddrive Occasionally
Likewise having a clean ordered system helps
goto Start-(all)Programs-Accessories-System Tools-Disk Defragmenter then click on Defragment
or use other Defrag software such as Diskeeper


Remove SpyWare and Adware
Many programs put spyware or adware on your pc without your knowledge. These transmit info about your habits etc, and take up resources and tend to run at Startup (thus slowing it down). Use programs like Adaware & Spybot to remove these.


Scan for Viruses
Does this need to be explained?


Uninstall & Remove any Software \ Items you do not use
Simply remove programs you dont use thru "add remove programs" & also in "add\remove Windows Components" -
Take a look at what Xplite has to offer in relation removing windows items
and see
BoldFortunes *Slimming Down XP*http://forums.techguy.org/showthread.php?t=212167&page=1 AND
Slimming Down Xp, Bold_Fortune's Complete 7-Part Guide http://www.graphixanstuff.com/Forum/index.php?showtopic=1692
and
NeoMayhems "*Making your windows folder smaller" http://www.neowin.net/forum/index.php?showtopic=80511

____________________________________________________



REMOVE STARTUP PROGRAMS
Many programs you install set themselves to run automatically when you start up your computer. Each program that runs on startup not only consumes system resources but also extends the length of time it takes your PC to fully boot.
it is generally unnecessary to have any programs running in the background (other than security software like virus-scanners or firewalls) disable your unwanted startup programs to increase your startup speed and conserve system resources.

Method 1 - Startup Controller Utility:
I prefer to use other start up controller programs such as Registry Cleaner to control what is allowed to startup.
(look on google for other Startup software-lots of freebies)
I would advize using this one : STARTUP CONTROLLER Panelhttp://www.mlin.net/StartupCPL.shtml

http://www.mlin.net/media/StartupCPL.png

but
you can use the MSCONFIG utility
The 'startup' tab in MSCONFIG provides access to several other applications that are started at boot up and are running in the background.
By examining their Filenames and directories, you should be able to get a feeling for what is necessary and what is not.
Be aware than several viruses and worms have a habit of disguising themselves with authoritative sounding Windows system file names,
such as the Win32.spybot.worm as MSCONFIG32.EXE. Leave these for now if you are not sure. (this paragraph taken from pcstats.com)
Go to 'start\run' and type 'msconfig'
Click on the "startup" tab (furthest right)\
Unclick any items you don't want to load when windows starts.
after editing the msconfig utility and rebooting a pop warning will come-simply clik "do not warn me again"

"Do you ever uninstall programs and they are still listed under startup items in msconfig? Personally, I found myself with 30 such items from old installs.
Microsoft leaves you no way to clean up this list, but have no fear, I have figured it out for you.
1. Open MSconfig and click on the startup items tab
2. Open Regedit and navigate to HKLM/Software/Microsoft/Sharedtools/MSconfig
3. Compare the list of registry keys under startupfolder and startupreg with their counterparts in msconfig.
4. Delete the keys which are no longer valid.
5. Voila! You've cleaned up msconfig.
by Simon Tuck (reviewed by yoyo) http://tweakxp.com/tweak981.aspx

Check - Startup Folder in StartMenu
Goto Start > Programs > StartUp
Simply delete any programs you don’t want to load on startup. Windows does not put any critical files in here so relax.
This directory can also be a repository for various badness such as spyware and virus software, so if there are files here which are not shortcuts and you don't recognize them, you may wish to consider removing them.


Method 2 - From Within the Program
Open any program that starts up with windows-
goto options or preferences and look for something like "Start with windows" etc -
remove that and it wont load. (generally when you install a program it should politely ask you if you want it to start with Win).
e.g.: Messenger fans
To stop windows messenger from loading at startup.
go to tools-options-preferences-"uncheck”, run this program when windows starts, and run this program in the background.
You can still use it by clicking the icon, but it won't load with windows on start up.


Method 3 - RegistryDeleting*
1. Start --> run --> regedit
2. Navigate to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
3. Delete any entries that you don't want to load up
***WARNING***
Deleting keys from the registry will not allow you to set them to startup again if you change your mind.(unless you backup and know how to revert it)
Use Registry Cleaner to do this, its easier and has backup feature

_____________________________________________________________



SLOW STARTUP DUE TO GRFX CARDS \ FIREWALLS\ ANTIVIRUS Software?
There are alot of complaints that some grfx cards -firewalls and antivirus can slow down boot like hell eg: http://www.neowin.net/forum/index.php?show...dpost&p=2381357 (http://www.neowin.net/forum/index.php?showtopic=180494&view=findpost&p=2381357)
I suggest either checking with the your grfx\security manufacturures support for any solutions, or search...
Norton seems to have a fix and all i know is that with AtiMobility you can remove them from startup (and services..).
or simply move over to a Lighter less resource eating security system.
if you have symantec AV ,turn the services to manual and dont make it startup (stated by demorgoron in http://www.neowin.net/forum/index.php?show...dpost&p=2409538 (http://www.neowin.net/forum/index.php?showtopic=180494&view=findpost&p=2409538)
SlowBoottime with ZoneAlarm? - http://www.neowin.net/forum/index.php?show...=231506&hl=boot (http://www.neowin.net/forum/index.php?showtopic=231506&hl=boot)
See the IrCOMM2k Tweak at bottom for possible solution.


DISABLE UNNECESSARY SERVICES
Windows XP runs many services in the background. A lot of these are not actually necessary to the day-to-day operation of your PC, depending of course, on what you use it for. Different people will need different services enabled. The less services the better the performance the faster load up.
To judge for yourself which are necessary,

Goto> Control Panel > Administrative Tools > Services
OR
right click on 'My computer'
select 'manage.'
expand 'services and applications'
then click 'services' to open up the window listing all available services.

The ones labeled 'started' are currently running, and the startup type 'automatic' denotes a service which is started by windows each time the operating system loads. By highlighting each service, you can see a description of its properties, and make an informed decision on whether you need it or not.
To stop a service from running, right click on it and select 'properties,' then stop it and make the startup type 'disabled.' If the description indicates that services which depend on the service you are currently examining will fail if it is disabled, you can go to the 'dependencies' tab to see which services will be affected. (paragraph from pcstats.com)

The Best Site I know that shows which Services you can Safely Disable is - Black Viper's Windows XP Home and Professional Service Configurations - http://www.blackviper.com/WinXP/servicecfg.htm (scroll to bottom)

Here is another Site : http://www.overclockersclub.com/windowsxpservices.shtml

Demorgorn states: only do it if you know what you are doing and write down all the changes you make



PROCESSES - BASICS
You can see what processes are running on your pc by opening the task manager.(Ctrl-Alt-Delete)
In relation to the Services and StartUp programs the CORE system processes(+ internet access) that need to be running for Windows to function are:
csrss.exe
ctfmon.exe (do not disable if u need different languages-quoted from Slimy)
explorer.exe
lsass.exe
services.exe
smss.exe
svchost.exe (x4)
spoolsv.exe (printer...)
System
System Idle Process
Winlogon.exe
(+your firewall and antivirus programs...)
if any of the above .exes are named slightly different or are located outside of the system32 folder there is a big likelihood they are viruses.
( I have looked at 3 different machines running different services- and these are to my knowledge The Essential Core) There is an interesting little application called Procexp from www.sysinternals.com which shows which processes are effecting what on your system.


TURN OFF LOGIN & STARTUP SOUNDS
loading the sounds causes minimal delay but.....
Goto Control Panel-Sounds and Audio Devices-Sounds-
select -"start windows" -then in the sounds panel below select (None)
do the same for Windows logon and any others u want(alot off them).


BOOTVIS UTILITY - Boot Defragmenter
Confirmed in this thread: http://www.neowin.net/forum/index.php?show...4&hl=boot&st=15 (http://www.neowin.net/forum/index.php?showtopic=180494&hl=boot&st=15)
Usefull tool to see all info about which process are doing what, when & howlong during startup.
Made by Microsoft to help speed up Windows XP boot times.
"Bootvis.exe is a performance tracing and visualization tool that Microsoft designed to help PC system designers and software developers identify performance issues for boot/resume timing while developing new PC products or supporting software.
Please note that Bootvis.exe is not a tool that will improve boot/resume performance for end users. Contrary to some published reports, Bootvis.exe cannot reduce or alter a system's boot or resume performance. The boot optimization routines invoked by Bootvis.exe are built into Windows XP. These routines run automatically at pre-determined times as part of the normal operation of the operating system.
If you are an end-user seeking to resolve issues for boot/resume performance on your PC, we recommend that you contact the vendor from whom you purchased the PC. For information from Microsoft on specific issues, you can search Knowledge Base for Windows XP product issues related to "resume time."
Source of Quote : http://www.soft32.com/download_19687.html

How To use Bootvis
Go to the 'trace' menu and select 'next boot and driver delays.'
Bootvis will prompt to reboot. Reboot and wait for Bootvis to start again.
Go to the 'trace' menu and select 'optimize.' Reboot again. Wait for Bootvis to complete its analysis. Your boot times should now be optimized.
Download Bootvis: http://www.soft32.com/download-BootVis-19687-5.html


CHANGE BOOT SEQUENCE
A simple way to speed up boot is to change the boot order your Bios goes thru
Normally its
1.CD
2.Floppy
3.Hardrive
Change it to Hardrive first and you save seconds needed for the pc to check thru the list
go to the 'advanced BIOS features' section of the BIOS
and change the 'First Boot Device' setting to 'Hard Disk' (instead of floppy\cd etc)


SERVICE PACK DELAY BOOT?
See this http://www.neowin.net/forum/index.php?show...dpost&p=2400424 (http://www.neowin.net/forum/index.php?showtopic=180494&view=findpost&p=2400424)
According to korsairr
"youre right...
drivers then service packs = fast boots
service packs then drivers = slow boots"
:huh:


BACKGROUND INTELLIGENT TRANSFER
(If you haven’t already disabled it in Services)
If your system hangs about 2 or 3 minutes at startup, where you can't access the Start button or the Taskbar, it may be due to one specific service
(Background Intelligent Transfer) running in the background. Microsoft put out a patch for this but it didn't work for me. Here's what you do
Either disable it in services
or
1. Click on Start/Run, type 'msconfig', then click 'OK'.
2. Go to the 'Services' tab, find the 'Background Intelligent Transfer' service, disable it, apply the changes & reboot.
from tweakxp.com


NOGUIBOOT tweak - Disabling System Boot Screen
Submited by AresXP : http://www.neowin.net/forum/index.php?show...=217309&hl=boot (http://www.neowin.net/forum/index.php?showtopic=217309&hl=boot)
This tweak removes XP boot Logo at start up (shaving off a few secs)
*****Note:you will only see a black screen at bootup and prevents the displaying of boot messages such as Checkdisk***
Goto start - Run - type in MSCONFIG
in the system configuration utility- goto BOOT.INI - mark the /NOGUIBOOT-ok
reboot
you will get a pop warning after reboot-click the ignore in the future\don’t remind me etc.
OR
Goto C:/ find you your Boot.ini file and add " /noguiboot" right after "/fastdetect".

100%
10-25-2004, 03:21 PM
REMOVE LOGIN SCREEN
The welcome Login screen use alot of resources
These methods prevent xp from asking you to login so it goes directly to the user interface. Remember that removing the welcome login screen you’re making yourself more vulnerable in relation to security reasons

Method 1 - For one person pc users
If your the only one using the pc - do you really need to Login every time? (well for Security Reasons yes...)
Get rid of the Login by simply removing your password.
Goto - Control Panel>User Accounts>click on your Account>Change password>make sure all the fields are empty(ie:remove the passwords)>click Change Password-Done

Method 2
1. click on "Start" - then click on "Run" - and type
"control userpasswords2"
2. click OK
3. On the Users tab, clear the "Users must enter a user name and password to use this computer" check box and click "Apply".
4. Select the user you want to log on & click OK. A dialog will appear that asks you what user name and password should be used to logon automatically, just click "OK".
Then go to Control Panel / User Accounts, and click “Change the way users log on or off”, and untick both “Use the Welcome Screen” and “Use Fast User Switching”
Taken from post by: Dirk Diggler http://tweakxp.com/tweak320.aspx


USE THE OLD WIN2000 LOGIN SCREEN INSTEAD
By switching to the 2K style welcome screen, many things speed up drastically.
goto the Control Panel > User Accounts.
Click "Change the Way a User Logs On or Off".
Uncheck "Use the Welcome Screen"
***The one downside is that you can no longer have multiple users logged on at once***
________________________________________________________________



Speed-up log-in tremendously!
If like me you've tried everything else and your log-in and log-off to XP is still tremendously slow then you might try this little trick. First, if there are any other users on your computer see if they have a similarly long log-in. If they don't the problem might be your roaming profile, which is a folder where XP stores your settings you can access them from anywhere in the network. Since these profiles can get really bloated(as in my case) and are not really necessary unless you log-in from different computers in a large network, you should disable it. Here's how:
1. Right click on My Computer, select the Manage option.
2. From the Management Console, select the Local Users and Groups option.
3. Double-Click on the Users folder that appears on the right panel.
4. Right click on the account with the slow log-in and select Properties.
5. Click on the Profile tab of the Properties Window.
6. Erase(but keep note a not of this) whatever path appears for Profile Path under User Profile and Local Path under Home Folder: LEAVE THESE LINES BLANK.
7. Reboot. Try to log-in into the problematic account, you should see a significant speed-boost, the computer might warn you once or twice that your Roaming Profile is not available, ignore it and it will go away,
Note: You also will not have your settings and files that a roaming profile provides across a network.
submitted by Arif AnwarHi (reviewed by Allan 5-11-03) http://tweakxp.com/tweak1759.aspx
(not tested by me)


Reduce wait time after XP boots
A common performance problem with Windows XP is 'start lag,' in which the operating system boots up normally, the desktop is visible and usable, but programs will not start, and selecting icons and using the start menu are extremely slow. This can take anywhere from a few seconds to a couple of minutes to clear up, and can make using the operating system extremely frustrating, especially if you are in a hurry after the reboot.
This delay is generally caused by Windows XP's networking services looking for other computers and advertising their functions over the computer's network connections.
If this problem is driving you nuts, there is a way to reduce or eliminate the delay, though if you are attached to a home network, it will reduce your computer's functionality on that network.

If your computer is not attached to a home network:
Right click on 'my computer' and select 'manage.'
Expand 'services and applications' and select 'services' to open the services window.
Highlight the 'workstation' service, right click and select 'properties.'
Set the 'startup type' dropdown box to 'disabled.' Click 'ok.'
Note that you will need to re-enable the workstation service should you wish to network your PC in the future.

If your computer is part of a home network:
Go to 'start\control panel\network and internet connections\network connections.'
Right click your current network connection (should be 'local area connection' unless you have more than one network adaptor) and select 'properties.'
Uncheck the 'File and Print Sharing' box and press 'ok.'
*********Note that this will disable your computer's ability to share files and printers over the network, though it should not affect your ability to access such resources on another system. pcstats.com********
___________________________________________________________



TURN OFF BIOS DISK DETECTION
Most modern motherboards will attempt to detect any IDE devices, such as hard drives and CD drives, during the POST sequence each time the computer boots. By configuring the BIOS with the correct drive information, you can shave a few seconds off your boot time by avoiding this detection process.
To do this enter your system's BIOS setup screen.
Depending on your motherboard, you may have an IDE drive auto-detection menu. If you do, simply select it to automatically set your drives. If not, configure the drives through the 'standard CMOS settings' menu.
Note that some motherboard chipsets (like Nvidia's Nforce 2) do not allow this auto-detection to be disabled.
From pcstats.com
(not tested)


DISABLE BOOT VIRUS DETECTION
The boot virus detection setting is a holdover from the early days of computer viruses, when the greatest threat was from virus programs that wrote themselves into the boot sector of hard disks or the partition table. Some motherboards are equipped to monitor any attempt to write to these areas during boot up, and halt the process with a warning for the user.
Since every version of Windows after 3.1 needs to write to these areas during install, and the modern virus style of choice is the email worm, this feature is now obsolete. Disable it for convenience and increased boot speed.
It will commonly be found in the 'advanced BIOS features' section of the BIOS.
from pcstats.com
(not tested)


DISABLE AUTODETECT DRIVES
Submitted by SaLiVa (see post below)
Heres another tip: The BIOS usually has Auto Detect Drives on default. This takes a while to scan through the drives, so Set your BIOS to None for non existing drives, so that it skips the drives you dont have. And set it to Manual for those with drives in them. And I think you save 1 second on Start Up.




LESS GLAMOUR MORE SPEED
By not using sexy effects in windows you will increase general system performance and bootup since the core (classic) interface gets loaded first anyway.
In otherwords avoid using alternative Boot Screens-Login Screens and other Heavy interface enhancers

Choice 1 - Remove Glossy Effects
Right click "My Computer" and choose properties.
Click on the advanced tab, and than performance settings.
You now are now in the visual effects tab,
check "adjust for best performance"
and uncheck every squared box in the box
(I would keep "use drop shadows for icon labels" because it’s worth the look on the desktop)
(if you want to keep Windows styles then keep this marked "use Visual styles..." at bottom)
Click OK, OK

Choice 2 - CLASSIC Style - Remove Interface enhancers such as Windows styles
Remove the Windows styles or other interface enhancers. This will bring back the Windows Classic shell - which runs & loads faster.
Right click on empty space on your desktop - click Properties
on top click Appearance - "windows and Buttons scheme"on top select - Windows Classic Style.
ok.

Remove Desktop Image
By simply having a one color desktop background (instead of an image) Xp wont have to load it.(or make sure your image isnt too heavy in kb)
goto>Display Options>tab Desktop>select "None" and choose color
______________________________________________________________________________



REMOVE UNWANTED FONTS to increase Boot Speed
Windows checks and loads fonts during the startup process, therefore having a large amount of font files can cause performance to drag during startup. The simple solution for this (if you do not expect to use the majority of these fonts constantly) is to move the unnecessary fonts to a new directory elsewhere on the hard disk, preserving them in case they are needed, but preventing them from loading upon startup.
To do this:
Create a new directory called 'font backup' or something similar on your c: drive.

Go to 'start\control panel\fonts' and select all fonts (for now, we will be more selective later). Drag and drop all the fonts into the backup folder you just created. Things will get garbled for a moment, never fear. Windows XP will automatically re-install the base fonts that it needs to display text into the font’s folder in a second or two.

Now you have the bare minimum of fonts installed. Go through the backup folder and cherry pick the fonts that you are sure to use (like Times New Roman or Arial).
If you removed a large volume of fonts, your system should now boot faster.
if not then just copy the fonts back to the original font’s folder
***Note: You won't be able to access the fonts in Word or Notepad if they are removed from original folder***
from pcstats.com
Demorgorn's advice is : for deleting fonts automatically,i reccomend using Font Frenzy ,shareware with 40 days trial that can delete those unneeded fonts



THE PREFETCH
The Prefetch is located here C:\WINDOWS\PREFETCH
The listing of programs in the Prefetch are there so that programs loads faster.

A: Clean you’re Prefetch for obsolete programs
if you see any programs which are no longer in use - delete them. CCleaner does this automatically for you.
Don’t worry if you delete any others cause they will be put back the next time you startup that specific program.

Here is a simple batch file for cleaning your Prefetch completely (do it occasionally once a month or so)

del C:\Windows\Prefetch\*.*
@ECHO SUCCESS
@PAUSE
EXIT

copy & paste it in notepad then save it as EmptyPrefetch.bat
***It has been suggested that cleaning your Prefetch too often decreases system performance.***

B: Increase speed by tweaking prefetcher settings
This is a unique technique for XP, which could improve the performance significantly by tweaking the prefetcher (which is a cache folder).
1. run "regedit";
2. goto [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters\EnablePrefetcher];
3. Set the value to either 0-Disable, 1-App launch prefetch, 2-Boot Prefetch, 3-Both ("3" is recommended).
4. reboot.
It should decrease the boot time and the time it takes to load programs.
submitted by Dr. Dong (reviewed &/or edited by Allan 5/7/03) tweakxp.com
(not tested)

C:Totally DisablePrefetching*
Submited by Industrious http://www.neowin.net/forum/index.php?show...ndpost&p=771187 (http://www.neowin.net/forum/index.php?showtopic=38718&view=findpost&p=771187)
You can disable totally Prefetching via the registry!
Run regedit.exe then go to:
HKLM\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\PrefetchParameters
Change EnablePrefetcher value from 3 to 5 (decimal)
***Not tested-dont know what effects this has***
____________________________________________________________


DISABLE AUTO DETECTION OF EMPTY IDE SLOTS
Submitted by Bold_Fortune : http://www.neowin.net/forum/index.php?show...=222045&hl=boot (http://www.neowin.net/forum/index.php?showtopic=222045&hl=boot)
"Saved 1.5 Seconds Off My Boot Time, I know I know, Big Deal"
It worked for me!

Another quick trick for a faster boot up is to disable the auto detection that Windows XP uses to determine if there are IDE devices present in any of the IDE slots on the motherboard. More specifically, disable this feature on any empty slots to prevent the operating system wasting time and resources checking them.

Right click on 'my computer' > select 'properties' > Go to the 'hardware' tab and select 'device manager' to open the device management window.

Expand 'IDE ATA/ATAPI controllers' and highlight the 'primary IDE channel.'
Right click the highlighted entry and select 'properties.'
Go to the 'advanced settings' tab.

If either IDE slot on the controller is empty, the 'device type' dropdown box will be not grayed out. Set it to 'none' to disable auto detection of IDE devices on that particular slot.

Repeat the above steps for the 'secondary IDE controller.'
Note that if you wish to add a new IDE device, you will have to reset the 'device type' setting to 'autodetect' in order for Windows to use the new drive.


Disable Parts of GROUP POLICIES MANAGER - gpedit.msc
This will dramatically speed up the login process - If you don't need to utilize Group Policies on the local machine, you can disable parts of it.
Login as Administrator.
Go to Start/Run type in gpedit.msc and click ok.
Right click on the Local Computer Policy entry and select Properties from the menu that appears.
Add checkmarks to the two options within the Disable section. Close out.
Reboot.
Notice the login access time has decreased dramatically.
submitted by The_Wizard tweakxp.com
(not tested)


TIMEOUT DUAL BOOT TWEAK
If you have a dual boot process - you can edit the time xp displays the choice page. the default is 30sec. Lower the seconds (10 9 8 etc) and it’ll take less....time
Goto - Control Panel > System > Advanced > Startup and Recovery > Settings > Time to display list of operating systems
or
edit your boot.ini file in C:\ and change the number after 'timeout"


Very SLOW BOOT WHEN NETWORKING
On some XP Pro installations, when connected to a network (peer-peer in this case), the computer boot time can be over 1:40. The system seems to freeze after logging in and the desktop may not appear or will freeze for a minute. As timed with the utility, Bootvis.exe, the problem was with the driver mrxsmb.dll, adding over 67 seconds to the boot time. Turning off and restoring file and printer sharing eliminated 65 seconds from the boot time.
1. Alt-click (or right click) on Network Places > Properties
2. Alt-click on Ethernet Adapter connection > properties
3. Un-check "File and Printer Sharing for Microsoft Networks" > OK
4. reboot
5. If you need file or printer sharing, repeat the above, re-check the box and re-boot again.
submitted by Pete Erskine


DISABLE UNUSED PORTS & DEVICES
This is done by disabling your unused devices in Device Manager.
for example, if you don't have input devices that are connected to one of your USB’s or COM ports, if you have a integrated sound card or video card that you have upgraded, or if you do not use a floppy drive on your system, it pays to disable them will give you an extra performance boost in booting. The same goes for extra network cards.
Of course, the standard rule of thumb applies here: If you do not know what it is, leave it alone.

Yes I’ve tried this. I've disabled every devices that currently has no use for my pc and it worked great. My booting time is much faster than before.
Go to Control Panel -> System -> Hardware tab -> device manager
Disable devices that you don't use for your PC and then restart.
submitted by Xpentours http://tweakxp.com/tweak1645.aspx And PcStats.com
(not tested but logically correct)
for example
DisableUSBRootspower
It could be that your computer is trying to save power for any of the USB Device connected.
1. Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager.
2. Double-click the Universal Serial Bus controllers branch to expand it, right-click USB Root Hub, and then click Properties.
3. Click the Power Management tab.
4. Click to clear the Allow the computer to turn off this device to save power check box, click OK,
5. Do the same with all USB ROOT HUBS.
6. Then quit Device Manager and restart your system.
These troubleshootings should help your Computer
(got this off neowin a long time ago)

IF You have TWO HARDDRIVES
If you have two Hard disk (note hard disk not partitions) move the page file to the other hard disk... and make it smaller if you have more RAM.
Submited by C}{$ http://www.neowin.net/forum/index.php?show...ndpost&p=395699 (http://www.neowin.net/forum/index.php?showtopic=38718&view=findpost&p=395699)
(not tested)


ENABLE BOOT DEFRAG
A great new feature in Microsoft Windows XP is the ability to do a boot Defragment. This places all boot files next to each other on the disk to allow for faster booting. By default this option is enabled but on some builds it is not so below is how to turn it on.(Y is good)
1. Start Regedit.
2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction
3. Select Enable from the list on the right.
4. Right on it and select Modify.
5. Change the value to Y to enable and N to disable.
6. Reboot your computer.


Speedup boot time by IMPROVING NTFS CHECK
CHKNTFS is the command used to set the AUTOCHK initiation count down time. You can reduce it from default 9 seconds to a much lower value say 4 seconds. Go to command prompt and type CHKNTFS/T:4
This command would set the AUTOCHK initiation count time down to 4.
(don’t know where I got this)

PROCESS IDLE TASKS TWEAK
Please read thru the entire of both these threads for more info
http://www.neowin.net/forum/index.php?showtopic=233437&st=0 by AresXP - Lighning Fast Startup
http://www.neowin.net/forum/index.php?showtopic=232067 by samxt - Add ProcessIdleTasks cmd to your Start...., menu conplete with icon. For Xp home/Pro


IrCOMM2k Tweak
I stumbled upon a COM port driver. I installed it to my computer and noticed that XP loads almost instantly with the Norton Anti-Virus and Firewall at startup. I booted my computer again and it loads almost instantly. Usually I have to wait more than 5 mins because I have a DSL modem but it's a dynamic ip, meaning, I have to wait for the modem to search for an ip available and it takes painfully long. Anyway, to fix this, download IrCOMM2k.zip at this site http://www.ircomm2k.de/.
Download : http://www.stud.uni-hannover.de/~kiszka/Ir...k-1.2.1-eng.zip (http://www.stud.uni-hannover.de/~kiszka/IrCOMM2k/Downloads/IrCOMM2k-1.2.1-eng.zip)
submitted by Bruce Rabe tweakxp.com
(not tested)


BOLD_FORTUNE'S and NEOMAYHEMs DELETE FILES TWEAK
BoldFortune and Neomayhem have made Amazing lists of items which you can delete from Windows.
By removing as much as possible from windows it will logically load faster.
Remember to Registry clean afterwards. Read the entire thread
NeoMayhems "Making your windows folder smaller" http://www.neowin.net/forum/index.php?showtopic=80511
Bold_Fortunes "Slimming Down XP.." http://forums.techguy.org/showthread.php?t=212167&page=1
and
Slimming Down Xp, Bold_Fortune's Complete 7-Part Guide http://www.graphixanstuff.com/Forum/index.php?showtopic=1692


DLL & EXE Editing
There are ways of editing the core xp .dlls to make them lighter - making the icons, bmps, avi's less grfx intense and generally making .dlls smaller for faster load.
This requires knowledge of Resource Hex editing.
**Do Not attempt if you dont know what your doing**
These 2 sites focuses purely on playing with windows : http://www.virtualplastic.net/html/art_hack.html#winxp
http://wint.virtualplastic.net/
Search on this Neowin for .dll \ .exe tweaks, resource hacking etc for more
hacking explorer.exe - http://www.neowin.net/forum/index.php?showtopic=225692



After StartUp....Clean you’re Ram ?
If you use a Ram cleaner emptier etc after startup you will notice that there is always alot of info filling up the ram 31%?.
Use a ram cleaner to get a fresh start.
Don’t really know if this helps but....



QUESTIONABLE - UNCERTAIN TWEAKS

Use the INTEL APPLICATION ACCELERATOR??
If your computer has an older Intel chipset (pre-865) you may benefit from downloading and installing the Intel Application Accelerator . This software replaces the Windows XP ATA (hard disk and IDE device) drivers with ones specially designed for Intel chipsets, improving disk performance and boot time.
*****Please make sure that your computer conforms to the system requirements before installing the accelerator.******
Pcstats.com
(tested but didnt change anything-not the right system)


Speed up Network Browsing??
(I am uncertain whether this tweak speeds the bootup in anyway but since my logic states that if explorer.exe loads, it will immediately will also check links to other pcs etc-this twk removes the possibility - this is a good tweak nonetheless)
There was a bug in windows 2000 that would cause the scheduled tasks folder to be searched when ever the user would browse network drives. Microsoft developed a fix for this bug. The fix fixed the problem and it also had nice side affect of speeding up browsing of Microsoft networks. Below are instructions how to apply the fix.
1. Open up regedit.
2. Navigate to HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/Current Version/Explorer/RemoteComputer/NameSpace.
3. Find a key named {D6277990-4C6A-11CF-8D87-00AA0060F5BF}.
4. Right click on it and delete it.
5. Restart
submitted by James Penneck tweakxp.com


UNLOAD DLLs TWEAK??
I have not tested this-someone please confirm?
I heard somewhere (tweak manager) that unloading your dlls from memory supposedly speeds up boot time.
To enable it here is the registry code.

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AlwaysUnloadDLL]
""="1"
___________________________________________________




I think this should be sufficient enough to give you a headache :laugh:



Should you have any suggestions or find any inconsistencies or alternatives please state so and it will be changed or added.

100%
10-28-2004, 12:34 PM
Updated the guide with

Changed & cleaned general layout for easier reading...

Added the following;

NeoMayhems "*Making your windows folder smaller" http://www.neowin.net/forum/index.php?showtopic=80511


Fixed Bold_Fortunes link(s)
Bold_Fortunes *Slimming Down XP...* http://forums.techguy.org/showthread.php?t=212167&page=1
and http://www.graphixanstuff.com/Forum/index.php?showtopic=1692

Some basic tools

removed my (oops) Symantec process references
added ctfmon.exe

Remove Desktop Image from the Glossy section
By simply having a one color desktop background (instead of an image) Xp wont have to load it.(or make sure your image isnt too heavy in kb)
goto>Display Options>tab Desktop>selectect None and choose color


DISABLE UNUSED PORTS & DEVICES
DisableUSBRootspower
It could be that your computer is trying to save power for any of the USB Device connected.
1. Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager.
2. Double-click the Universal Serial Bus controllers branch to expand it, right-click USB Root Hub, and then click Properties.
3. Click the Power Management tab.
4. Click to clear the Allow the computer to turn off this device to save power check box, click OK,
5. Do the same with all USB ROOT HUBS.
6. Then quit Device Manager and restart your system.
These troubleshootings should help your Computer
(got this off neowin a long time ago)


DLL & EXE Editing
There are ways of editing the core xp .dlls to make them lighter - making the icons, bmps, avi's less grfx intense and generally making .dlls smaller for faster load.
This requires knowledge of Resource Hex editing.
**Do Not attempt if you dont know what your doing**
These 2 sites focuses purely on playing with windows : http://www.virtualplastic.net/html/art_hack.html#winxp
http://wint.virtualplastic.net/
Search on this forum for .dll \ .exe tweaks, resource hacking etc for more

cpt_azad
10-29-2004, 02:30 AM
nice, i like it

tesco
10-29-2004, 02:33 AM
Good work 15%! did you actualy write all that? :o

100%
10-29-2004, 03:56 PM
yes it is collage of info i ripped from everywhere (all sources are stated) the rest is logic
no?
its a little bit exaggerated - i mean i have not done (not permitted to) tweak anything on my Gfriends machine-yet it starts fine. i mean all this does is fix a few seconds - but in somepeoples cases it can get really bad 3mins
alot of these tweaks are different and aplly to different situations.
i got annoyed that i had search everywhere for different tweaks-so made a list over time
anyway hope it helps

can anybody confirm the "unloadDlls from memory" tweak?

Aurora
11-18-2004, 04:13 AM
Really good
Don't ever get this tread off the forum!
I'm going to keep needing it :))))

uNz[i]
11-22-2004, 06:14 AM
Fantastic guide. 15%. :)

One small question though...

SERVICE PACK DELAY BOOT?
According to korsairr
"youre right...
drivers then service packs = fast boots
service packs then drivers = slow boots"
:huh:

Does that still apply if the service packs are slipstreamed into the XP CD? :huh:

100%
11-22-2004, 08:42 AM
I have absolutly no clue
I just read that in a post somewhere....
but logically even if it is sliptstreamed it shouldnt make a diffrence no?
if you find an answer post back

uNz[i]
11-23-2004, 05:23 AM
Okay, I'll post back in 2 weeks or so. ;)

scribblec
11-24-2004, 01:17 AM
isnt there a program which can do all those things for us?

100%
11-24-2004, 03:08 PM
show me

scribblec
11-24-2004, 10:52 PM
no im asking isnt there?

cos im a lazy SOB

100%
11-24-2004, 11:20 PM
Well a few of the settings
you could actually save as registry settings
and thn simply run the .reg file when you reanstall.
But ive heard that TuneUp covers a few of the tweaks

100%
01-03-2005, 04:06 PM
Some minor updates

added standalone reference to Tunexps automatic optimizer

TUNEXP all in one speeduper
Many people have mentioned that Tunexp has an all in one system optimizer which seems to speedup booting
http://www.driverheaven.net/dforce/showdoc...oc=txp_download (http://www.driverheaven.net/dforce/showdoc.php?doc=txp_download)

http://img.photobucket.com/albums/v173/sjoko/Capture_01032005_163324.jpg
http://img.photobucket.com/albums/v173/sjoko/Capture_01032005_134453.jpg


added stronger reference to Startup Controller program

Method 1 - Startup Controller Utility:
I prefer to use other start up controller programs such as Registry Cleaner to control what is allowed to startup.
(look on google for other Startup software-lots of freebies)
I would advize using this one : STARTUP CONTROLLER Panelhttp://www.mlin.net/StartupCPL.shtml

http://www.mlin.net/media/StartupCPL.png


some minor layout changes

tristan8
01-19-2005, 05:11 AM
kool thanks

djlove
08-27-2006, 04:54 PM
dats gd thax a lot

digmen1
11-04-2006, 06:49 PM
A brilliant tutorial

Will take me days to work on it all.

But I find they all help.

One thing that worries me, we have all collected up lots of these little start up tweaks and notes on services and processes and startups. This has taken us all quite a while.

My question is that with VISTA coming out soon, will they still apply ? I appreciate that there will obviously be a lot to learn about Vista, but will most of these tweaks etc still apply do you think ?

Regards

Digby
NZ

100%
11-04-2006, 06:52 PM
not only these but all other tweaks in xp may go lost, although i doubt Vista has changed That much.
Nonetheless tweaks for Vista are already in the making....

Tmaster
11-05-2006, 01:18 AM
thank you for the great guide

grchl3
11-10-2006, 11:45 PM
wonderful stuff. thanks much for the guide. i can really use this coz my current xp boot time is painfully slow

gatorade
11-21-2006, 03:11 AM
superb guide

Funnyguy
04-10-2007, 10:09 AM
Awesome guide, will certainly help me now i dont have to wait ages for my comp to load up :p

das31
04-10-2007, 09:54 PM
thanks

dedlikeoscar
04-24-2007, 07:05 PM
I don't use Windows much anymore but man that is an amazing guide! I will try some of these out because dual booting is much sweeter when you don't have to wait as long.:D

SnipeR19
05-01-2007, 02:43 PM
WWWOOOOOWWWW it's work

thanx Brother

maynard
05-01-2007, 03:34 PM
Thanks a lot very useful :)

swampfox1
11-01-2007, 06:43 AM
awesome stuff, thanks:D

cabang
05-23-2008, 05:12 AM
thanks dude this is really a nice guide, i tired to follow as much as i can.

i hope you update it for SP3 etc. soon

i know its bit early but still.

mindlock
03-23-2010, 10:19 AM
awesome guide.....:)

Bisibonzi
04-19-2010, 03:03 PM
Great Guide

8dc
04-20-2010, 09:26 AM
Personally i use Wopti to boost os speed, it is a nice tool.

AceofSpace
04-25-2010, 02:38 AM
Thanks for the info will try to speed it up!

ma7moud1
08-11-2010, 04:26 PM
Great Work ,, ;)

weedpeople
08-13-2010, 12:05 AM
Thank you ! Great guide