freak
12-31-2004, 04:11 AM
OK i'm trying to figure out how the heck to do this cause the name don't match right... The cable coming off the 2 usb port from the front of my case are labled like this
Cable 1:
VCC1
Data -1
Data +1
GND 1
Cable 2:
VCC2
Data -2
Data +2
GND 2
Now here's the pin layout on my mobo...
Pin 1: VREG_FP_USBPWR0
Pin 3: USB_FP_P0-
Pin 5: USB_FP_P0+
Pin 7: GND
Pin 9: Key
Pin 2: VREG_FP_USBPWR0
Pin 4: USB_FP_P1-
Pin 6: USB_FP_P1+
Pin 8: GND
Pin 10: USB_FP_OC0
Here's how I'm guessing it goes but i'm not 100%
Pin 1: VREG_FP_USBPWR0 = VCC1
Pin 3: USB_FP_P0- = Data -1
Pin 5: USB_FP_P0+ = Data +1
Pin 7: GND = GND 1
Pin 9: Key = Not used
Pin 2: VREG_FP_USBPWR0 = VCC2
Pin 4: USB_FP_P1- = Data -2
Pin 6: USB_FP_P1+ = Data +2
Pin 8: GND = GND 2
Pin 10: USB_FP_OC0 = Not used
Any help would be awesome!
Cable 1:
VCC1
Data -1
Data +1
GND 1
Cable 2:
VCC2
Data -2
Data +2
GND 2
Now here's the pin layout on my mobo...
Pin 1: VREG_FP_USBPWR0
Pin 3: USB_FP_P0-
Pin 5: USB_FP_P0+
Pin 7: GND
Pin 9: Key
Pin 2: VREG_FP_USBPWR0
Pin 4: USB_FP_P1-
Pin 6: USB_FP_P1+
Pin 8: GND
Pin 10: USB_FP_OC0
Here's how I'm guessing it goes but i'm not 100%
Pin 1: VREG_FP_USBPWR0 = VCC1
Pin 3: USB_FP_P0- = Data -1
Pin 5: USB_FP_P0+ = Data +1
Pin 7: GND = GND 1
Pin 9: Key = Not used
Pin 2: VREG_FP_USBPWR0 = VCC2
Pin 4: USB_FP_P1- = Data -2
Pin 6: USB_FP_P1+ = Data +2
Pin 8: GND = GND 2
Pin 10: USB_FP_OC0 = Not used
Any help would be awesome!