Printable View
there's always room for improvement. some dude with wc oced his P4 2.4 ghz to 4.0Quote:
Originally posted by Pho3niX@13 October 2003 - 13:57
well strait out of the box here's the score ... there's definitively room for improvement
http://arc.aquamark3.com/arc/arc_vie...nID=1523572861
he's out of his mind. my 2.4 is @ 2.6
that's it for now
maybe higher when i get better cooling
IMO overclock if you know the risks and how to reduce them, because overclocking is fun.
If you can run games at least at sensible frame rates (20-ish) there isn't really a need to push the card - if you want to know what happens when you want to go faster than your hardware will allow refer to the JATO car story.
well i got a nice boost almost 10 000 more point only for changig to the omega driver
http://arc.aquamark3.com/arc/arc_vie...nID=1524665151
now i have 324 of core and 283.5 of memory what can be resonable value of how much i can higer them... should i augment all those by the same % like 10% more for each or is there one that we can augment more than the other
anywais tanks fool... i alwais imagined that overcloaking impleyed doing modification to the actuall hardware rather than driver / software
memory speed should go higher than core speed - the way i o/c my card was take the memory speed as high as it could go then the core afterQuote:
Originally posted by Pho3niX@13 October 2003 - 15:22
now i have 324 of core and 283.5 of memory what can be resonable value of how much i can higer them... should i augment all those by the same % like 10% more for each or is there one that we can augment more than the other
memory speed should go higher than core speed - the way i o/c my card was take the memory speed as high as it could go then the core after [/b][/quote]Quote:
Originally posted by DarthInsinuate+13 October 2003 - 08:59--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (DarthInsinuate @ 13 October 2003 - 08:59)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Pho3niX@13 October 2003 - 15:22
now i have 324 of core and 283.5 of memory what can be resonable value of how much i can higer them... should i augment all those by the same % like 10% more for each or is there one that we can augment more than the other
yup i OC'ed my card its just a 5200 and i raised each by 10 MHz and it runs fine. but the memory runs faster for a reason if you dont keep them at the same ratio your only cutting performance before you freely oc you should look up people who have OC'ed 9800's on review sites like tomshardware or hardocp.com
there's always room for improvement. some dude with wc oced his P4 2.4 ghz to 4.0Quote:
Originally posted by abu_has_the_power+13 October 2003 - 14:07--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (abu_has_the_power @ 13 October 2003 - 14:07)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Pho3niX@13 October 2003 - 13:57
well strait out of the box here's the score ... there's definitively room for improvement
http://arc.aquamark3.com/arc/arc_vie...nID=1523572861
he's out of his mind. my 2.4 is @ 2.6
that's it for now
maybe higher when i get better cooling [/b][/quote]
so im out of my mind for pushin my athlon xp 3000 from 2.1567ghz to 2.6ghz? and im also crazy for pushin the core up by 200 and my memory speed up by 150 on my radeon 9800 pro? temps are pretty cold. the athlon is at 35 idle, and 40 full load, and the radeon is about 28 idle and 35 full load. as long as your temp is decently cool, overclocking is awsome. im living proof. enjoy your radeon also, its the like the best gfx card is the world!
hmm i have a default value of 324 for core and 284 for memory ?? unless the integrated oveclocker / tweaker in omega driver set mix up the memory and core columnQuote:
memory speed should go higher than core speed - the way i o/c my card was take the memory speed as high as it could go then the core after
i am dumb or cant i find anything about that ... i'm lost under page of news / review but no such thing as step by step instruction nor recomanded valuesQuote:
you should look up people who have OC'ed 9800's on review sites like tomshardware or hardocp.com
Okay, Phenonix, I take that back, you aren't full of it.
However, that is a poor score for your card. I am sure that you probably have way too many services running. Have you ever been to www.blackviper.com?
I scored 37,000 with a Radeon 9500 non pro mod to pro. Your score, for your CPU and gfx card totally sucks. Let me ask you this: have you reformatted your hard drive since you got your computer from Dell? Oh, and how much did pay for your system.
But thank for posting your score, as it consequently listed your specs. Welcome to hardwareworld. B)
Sorry Phenoix, I did not see that score. Much better. You see that that score is what I get maxed out on my card.Quote:
Originally posted by Pho3niX@13 October 2003 - 16:22
well i got a nice boost almost 10 000 more point only for changig to the omega driver
http://arc.aquamark3.com/arc/arc_vie...nID=1524665151
now i have 324 of core and 283.5 of memory what can be resonable value of how much i can higer them... should i augment all those by the same % like 10% more for each or is there one that we can augment more than the other
anywais tanks fool... i alwais imagined that overcloaking impleyed doing modification to the actuall hardware rather than driver / software
Download Rage3d tweak
It is a freeware. It has an overclocking utilt built in. So does the Omega driver set.
read this whole article too
and follow this free guide (read the whole thing) to tweak your system to the max
Oh, and be careful with overclocking your memory. You can be much more liberal with your core clock speeds.
an example of a safe overclock
http://www.vr-zone.com/reviews/Sapph...adapter-oc.jpg
read this article too
Quote:
. The memory clock was almost locked at 370 Mhz as I could not achieve anything higher than 370, but the core clock speed was the most surprising of all, able to run at 472 Mhz without a problem, an increase of 92 Mhz!
make sure that you disable vertical sync!Quote:
With our card running at 472/370, we were able to increase our score 792 3dmarks all the way up to 6175! A very very impressive overclock, especially when coupled with the fact that we were using stock cooling and there were no ramsinks on the card.
http://www.xbitlabs.com/images/video/extreme/g7.gif
http://www.xbitlabs.com/images/video/extreme/g8.gif
http://www.xbitlabs.com/articles/video/dis...extreme_14.html
read it
while a cataclysm is "a momentous and violent event marked by overwhelming upheaval and demolition" (Webster's Dictionary)Quote:
Originally posted by Pho3niX@13 October 2003 - 02:16
Then i read another topic about the new ATI cataclysm 3.8... i remember to have seen a screen about that when i installed the new ati driver
:lol: