Guide To Port-forward

Printable View

Show 40 post(s) from this thread on one page

03-24-2004, 11:59 AM
ReD-BoXeR

Quote:

Originally posted by TheFilePirater@10 December 2003 - 03:30
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

Image Resized
[img]http://www.chinkii.com/uploads/album/ladies/gateway.JPG' width='200' height='120' border='0' alt='click for full size view'>

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album...ress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

Image Resized
[img]http://www.chinkii.com/uploads/album/ladies/setup.JPG' width='200' height='120' border='0' alt='click for full size view'>

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

Image Resized
[img]http://www.chinkii.com/uploads/album/ladies/advanced.JPG' width='200' height='120' border='0' alt='click for full size view'>

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

Image Resized
[img]http://www.chinkii.com/uploads/album/ladies/ports.JPG' width='200' height='120' border='0' alt='click for full size view'>

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)

after step 6 there is pic on about linksys what are these a program? is linksys a port-forward or firewall program????
03-24-2004, 12:12 PM
ilw

linksys is the brand of router, each router manufacturer uses their own brand of firmware (software installed in the router) so your router will display a different looking page.
04-02-2004, 03:43 PM
Immortal Genocide

Do you have a guide for the Speedtouch 510 router?
04-28-2004, 10:59 PM
Wizard_Mon1

Quick question, do you think that port forwarding would work for a uni firewall and do you think they would be able to find out or that they would care.

I don't want to fuck with it if they won't like it and they can find out. :ph34r:

I would be grateful for any help as at the moment on this comp i can only use klite which is not so good.
:(
04-29-2004, 07:19 PM
tempochan

when i try to do port fowarding and open internet explorer and type in my gateway ip it tells me it cant find the server
05-15-2004, 06:18 PM
Wolfmight

your images were nocked offline.. get em back
06-15-2004, 04:19 AM
Cool_Guy

ummm i have two lights on...one green which is flashing and a yellow which doesn't flash...is everything alright here?
07-09-2004, 10:22 AM
vegeta

Quote:

Originally posted by TheFilePirater@10 December 2003 - 04:38
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

http://www.chinkii.com/uploads/album/ladies/gateway.JPG

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album...ress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

http://www.chinkii.com/uploads/album/ladies/setup.JPG

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

http://www.chinkii.com/uploads/album...s/advanced.JPG

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

http://www.chinkii.com/uploads/album/ladies/ports.JPG

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)

none of the imgs seem to work for me.
07-11-2004, 06:45 PM
trixr4kiddz

can someone help me?
do i check TCP or UDP?
and for my IP address do i leave the 0 at the end or put the real number of my ip address on there?
07-11-2004, 08:12 PM
ilw

TCP is more common for file sharing programs & put in your real network ip address.
07-16-2004, 01:53 AM
anxies

Quote:

Originally posted by TheFilePirater@10 December 2003 - 03:38
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

http://www.chinkii.com/uploads/album/ladies/gateway.JPG

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album...ress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

http://www.chinkii.com/uploads/album/ladies/setup.JPG

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

http://www.chinkii.com/uploads/album...s/advanced.JPG

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

http://www.chinkii.com/uploads/album/ladies/ports.JPG

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)

Right call me dumb but i just dont get this can someone explain to me a bit better. Its line 3 and actually finding the ports on my system that is getting to me i'm pretty new to this and i just cant figure it out help anyone. :rolleyes:

:huh: :(
07-22-2004, 06:21 PM
ilw

do you mean point 3? If so your gateway ip address is the network ip address of your router. ie the ip to log into your router. (probably 192.168.x.1 where x is either 0, 1 or 2). if you don't know your routers ip address open up command prompt (point 2 in the quoted list) and type in "ipconfig" without the quote marks. That should then tell you your gateway ip.

Finding the ports to forward is done by either checking the program's options (the program you are trying to forward ports for) or by looking on the internet to find out which ports a program uses. Normally you can choose which ports a program uses in options/preferences/settings.

If your stuck it may be better to make a new topic in the main bittorrent section because this topic doesn't get checked anywhere near as much
07-29-2004, 12:47 AM
shn

Quote:

Originally posted by trixr4kiddz@11 July 2004 - 12:46
can someone help me?
do i check TCP or UDP?
and for my IP address do i leave the 0 at the end or put the real number of my ip address on there?

make sure your on the same subnet as your router. do the ipconfig /all and make sure your octets match the gateway/dns server of your router. If the router address is 172.16.0.1 and your on anything else other than 172.16.1.x then you won't be able to connect to your router unless you spoof it.

btw, this guide is not that helpful. Well it is a little bit but not everyone has a shitty lynksys or a similar admin control panel.

n/m
07-29-2004, 01:42 AM
muchspl2

:lol:

why not just post a link to http://www.portforward.com
how to forward all routers, well enough to look at a similer model (if your is not listed) and figure out

Code:

2 Wire 1000HW 1000S 1000SW 3com 3C510 3C855 3C857 3CR856-95 3CR860-95 3CRWE51196 3CRWE52196 3CRWE554G72 3CRWE754G72 WL-540 Actiontec GT701-WG R1020S R1020S(U) R1520SU R1524SU R1524SU-1 Apple Airport Base Station Airport Base Station OS X Artnet RTA-230 ADSL Asante FriendlyNet FR1004 FriendlyNet FR1004AL FriendlyNet FR1104-G FriendlyNet FR3002AL FriendlyNet FR3004 FriendlyNet FR3004C FriendlyNet FR3004FLC Aztech DSL305EU DSL600EU DSL906EU DSL1100R Belkin F5D5230-4 F5D5231-4 F5D6230-3 F5D6231-4 F5D6231-4 Version 2 F5D7230-4 F5D7630 Benq AWL700 ESG103 Billion Bipac 5100W Bipac 640AE Bipac 640SE Bipac 643 Bipac 740 GE Bipac 741 Bipac 743 Bipac 7025 AE Bipac 7100S Binatone ADSL 2000 ADSL 2001 Blitzz BWA611 BWA611B BWA711 bRoad Lanner BRL-04FXP Buffalo Airstation WBR-G54 Cisco 675 678 Compaq iPAQ CP-2W CompUSA CompUSA Soho Comtrend CT-561 DABS DABS Value Router Dell True Mobile 2300 D-Link DI-514 rev a,b,c DI-524 DI-604 DI-604 version 2 DI-614+ rev a&b DI-624 DI-624+ DI-704 DI-704P revision a DI-704P revision b DI-704P revision c DI-704UP DI-707 DI-707P DI-711 DI-713 DI-713P DI-714 DI-714P+ DI-724 DI-754 DI-764 DI-774 rev a&b DI-784 DI-804 DI-804HV DI-804V DI-808HV DSL-302G DSL-500 DSL-500G DSL-504 DSL-504G DSL-604+ DSA-3100 Draytek Vigor 2200E Vigor 2600WE Efficient SpeedStream 2510 SpeedStream 2524 SpeedStream 2602 SpeedStream 2604 SpeedStream 2614 SpeedStream 2623 SpeedStream 2624 SpeedStream 5100 SpeedStream 5200 SpeedStream 5400 SpeedStream 5500 Etec PT-3808 PT-3810 PT-3812 PT-3816 PT-3818 PT-3830 Gateway DCW615R WBR-100 WGC-220 WGR-200 Wireless-G Wireless Cable Gateway Inexq BR400 ISW050U Intracom jetSpeed 500 Version 2 jetSpeed 500i Version 2 jetSpeed 520 Version 1 jetSpeed 520i Version 1 Jaht EA-2104G Lectron Pragmatic AR800C2 Level One FBR-1100TX FBR-1400TX FBR-1401TX FBR-1402TX FBR-1403TX FBR-1405TX FBR-1405TX version 3 FBR-1406TX FBR-1407A FBR-1407B FBR-1409TX FBR-1411TX FBR-1413TX WBR-1100TX WBR-1400TX WBR-2400TX WBR-2401A WBR-2401B WBR-3400TX WBR-3400TX Version 2 WBR-3402 version A & B WBR-3403TX WBR-3404TX LinkSys BEFDSR41W BEFSR11 BEFSRU31 BEFSR41 V1 & V2 BEFSR41 V3, V4 & V5 BEFSR41-CA BEFSR81 BEFSX41 BEFSX41-CA BEFVP41 V1 & V2 BEFVP41-CA BEFW11P1 BEFW11S4 BEFW11S4 v2, v3, & v3.2 BEFW11S4 V4 BEFW11S4-CA V2 & V4 WRT51AB WRT54G WRT54G v1.1, v2 & CA WRT55AG WRV54G WRV54G-CA MaxGate UGate-3000 UGate-3200 UGate-3200P UGate-3300 UGate-Plus Microlink Microlink DSL router Microsoft Base Station MN-100 Base Station MN-500 Base Station MN-700 Motorola BR700 SBG900 WR850G Multitech RouteFinder RF560VPN Network Everywhere NR041 Cable/DSL NWM11B Wireless NWP11B Wireless NWR04B Wireless NWU11B Wireless Netcomm NB1300 ADSL NB2800 Cable/DSL NB3000 Wireless NB3100 Firewall NB3100C Firewall NB3200 Cable/DSL NB3300 ADSL NB5540 ADSL SM4300 SmartAccess Netgear CG814W DG814 v4.0 DG814 ver 4.3, 4.4, & 4.7 DG824M v1.3 & v1.4 DG834 DG834G FM114P FR114P FR114W FR314 FR318 FR328S FV318 FVL328 FVS318 FVS328 FWAG114 FWG114P HR314 MR314 MR814 MR814v2 RO318 RH340 RM356 RP114 RP614 RP614v2 RT311 RT314 RT388 WGR614 WGT624 v1 & v2 Origo ASR-8400 ASR-8400 version 2 Planet ADE-3000 ADE-4000 ADE-4120A ADE-4120B ADE-4200 ADW-4100A v1 & v2 ADW-4100B v1 & v2 ADW-4200 ADW-4300 Prolink Hurricane 9000 Hurricane 9000P Hurricane 9000W PTI PAE-CE84 Q-Tec 584AA 585AB 773WR 778WR v1 778WR v3 790RH Repotec RP-IP2014 Shock 741A Siemens Gigaset Cable / DSL Gigaset SE105 Gigaset SE505 Sitecom DC-200 DC-201 DC-202 DC-202 version 2 DC-203 DC-213 DC-214 DC-215 DC-216 WL-014 WL-017 WL-025 WL-106 WL-108 WL-109 WL-122 SMC 2404WBR 2804WBRP-G 2804WBR version 1 2804WBR version 2 7004ABR 7004AWBR 7004BR 7004BR version 2 7004FW 7004VBR 7004VWBR 7004WBR 7004WFW 7008ABR 7008BR 7204BRA Solwise SAR130 Speedcom ART18CX Surecom EP-9510AX Sweex Adsl Annex A Adsl Annex B Adsl Wireless Annex A Adsl Wireless Annex B Thomson / Alcatel 3881 Speedtouch 510 v4.0 Speedtouch 510 v4.2 Speedtouch 510 Alt Speedtouch 530 Speedtouch 540 Speedtouch 545 Speedtouch 570 v1.0 Speedtouch 570 v2.0 Speedtouch 570 v4.2 Speedtouch Firewall Topcom Skyracer WBR244 Skyracer WBR254 Skyracer WBR611 Skyracer Pro WBR654 Toshiba WRC-1000 Trendnet TEW-431 BRP Trust Speedshare Turbo Pro Uniden ENR1504 WNR2004 U.S. Robotics USR8000 USR8000A USR8000A-02 USR8000A-03 USR8003 USR8011 USR8022 USR8054 SureConnect 9106 Voip ESC1710 Web Excel PT-3812 Westell Bellsouth B90-220030-04 2100 Wirespeed 2200 Wirespeed 2400 Wirespeed 2410 Wirespeed 36R570-01 Wirespeed Xavi 8021R ADSL Zonet ZSR0104B ZSR0104CP Zoom 5551 ADSL 5554 ADSL 5560 ADSL ZyXel Prestige 623 Prestige 623-41 Prestige 623ME Prestige 623R-A1 Prestige 623R-T1 Prestige 643 Prestige 645M Prestige 645M-A1 Prestige 645R Prestige 645R-A1 Prestige 645R-A2 Prestige 650 Prestige 650H Prestige 650HW Prestige 650R-33 Prestige 652 Prestige 653HWI Prestige 681 Prestige 782 Prestige 791 ZyAIR B-2000 v1 ZyAIR B-2000 v2 ZyAIR G-2000 ZyWall 1 ZyWall 2 ZyWall 2WE ZyWall 10 ZyWall 50 ZyWall 70 ZyWall 100
08-02-2004, 04:12 AM
shn

The easiest less tedious way would just be to forward "all" ports to your box, get a personal firewall and make that machine dmz. :)
08-02-2004, 07:10 AM
silent h3ro

How do you do the reset thing?
Nevermind
08-13-2004, 08:10 AM
mikenmike0001

can you reuploaded the pics from the first post?
08-17-2004, 02:46 PM
krome

Quote:

Originally posted by TheFilePirater@9 December 2003 - 19:31
How To Port-Forward With a Linksys Router (WinXP Vers 1.2)

1.) Find your "Gateway" Ip. This can be done many ways, in this guide I was describe one.

2.) Start > Run > Type "CMD" (without qoutes) and hit enter > Command prompt will come up (black screen)>Type "ipconfig" (without qoutes) and hit enter.

http://www.chinkii.com/uploads/album/ladies/gateway.JPG

3.) Now open up Internet Explorer (IE for short) and in the address bar
type your gateway IP.

http://www.chinkii.com/uploads/album...ress%20bar.JPG

4.) Hit enter and you should get a password prompt.

http://www.chinkii.com/uploads/album/ladies/router1.JPG

5.) Now depending on who has messed with your router before there is a
default password. Many including the most common "admin" or "admn" if
you try either and no luck, then reset your router. There is a small button
on the back that says "RESET", press and hold for 45 seconds.

6.) Now you should be at the "Setup" page, Depending on the
firmware version your page my look different from mine.

http://www.chinkii.com/uploads/album/ladies/setup.JPG

7.) Now choose "Advanced" tab, this will bring us to more advanced features of the router.

http://www.chinkii.com/uploads/album...s/advanced.JPG

8.) Now in the "Forwarding" tab, see the picture below on port numbers ect.

http://www.chinkii.com/uploads/album/ladies/ports.JPG

9.) Now depending on your LAN IP (see first figure to determan your LAN IP.) Just use the picture to help you figure out the ports.

10.) Hit "Apply" at the bottom and your done!

11.) Now enjoy faster speeds!!!

Authors Note: I hope this guide helped you, if so a small thank you e-mail would be greatly accepted :)

i cant see the pics that show how to set it up, mind uploading them again please i need this to work?
10-13-2004, 03:40 AM
Mmdott

Re: Guide To Port-forward

Well I'm not really new at bittorent but i just didn't mind the speed lol its from 5kbs-8kbs sometimes it goes down to 0.8 kbs. I have a network everywhere router im not sure if i have a firewall? maybe the window xp one , and norton anti-virus i forward my ports but the light never turns green im using azureus.
When i forward my port there was something like
Customize program: I wrote Torrent
Ext. Port: 6881
There was a box to check the Tcp i check it
Int.Port: 6889
then wrote my ip addres
and checked enable
If any wondering what it looks like write
http://192.168.1.1/ blank for username admin pass
thats all i did to try and make my torrent download go faster is there anythign im doign wrong ?
Thanks in advance
10-16-2004, 07:20 PM
Burre

Re: Guide To Port-forward

Quote:

Originally Posted by lightshow

For anyone who can't get this to work and have a D-Link Router versions:

DI-514, DI-524, DI-604, DI-614+, DI-624, DI-704P (revC), DI-754, DI-764, DI-774
DI-704P (revB), DI-704UP, DI-707P, DI-714P+, DI-804HV, DI-808HV, DI-824VUP
DI-704P (revA), DI-704, DI-707, DI-711 (revA), DI-713, DI-713P

Go here. This is the official D-Link Faq for how to foward ports for bittorent (any client). It's very simple :lol: .

I just love running into the answers I need. thx a bunch!!!
10-18-2004, 04:26 PM
Burre

Re: Guide To Port-forward

Hmmmmm.... It worked a while, but then the port test in emule failed again... Can someone tell me where I can find my IP, so I can verify? :(
10-18-2004, 04:30 PM
Benno

Re: Guide To Port-forward

you mean your lan ip?

go to run and type cmd
then in the dos windows that pops up type ipconfig this will show your ip

However you have to mame sure your router gives you the same local ip everytime you connect to it.
09-06-2006, 04:00 PM
Coma967

Re: Guide To Port-forward

My message was not too short. what the hell is this crap. i tried to post it like 3 times. annoying.
09-06-2006, 04:03 PM
Coma967

Re: Guide To Port-forward

lets see again then. Im new to filesharing Talk. I have a Linksys NR041. Im trying to use my HFS server. Attempting step 3. Im not getting the username: password thing to pop up. So... Will that happen even if i dont have a router hooked up to the computer right now ?
05-06-2008, 12:10 PM
ModemUser

Re: Guide To Port-forward

I'm a Modem User, When I type my IP from http://whatismyip.org[my Lan IP doesn't WORK!]on IE, I already typed Admin or Admn, the password is 1234, It won't WORK!

Show 40 post(s) from this thread on one page