hey i am not getting upload speed at all, its just 50kbps which the file is well leeched,any help
Printable View
hey i am not getting upload speed at all, its just 50kbps which the file is well leeched,any help
Are you still downloading?
i have started d/w a torrent from TL of abt 13 gb, with good number of leechers. Now its 40% done but upload speed is just 10 kbps.seems something wrong
The torrent is named ultimate movie pack, u can check
You will have to wait till it is finished, the HD cannot up & down that fast.
2 options, wait till it is finished and then watch it seed like crazy.
Reduce your down speed incrementally to get the best combo between up/down that you want.
oh its means we have total of 100 mbit. i got the point, i am d/w constantly at 10.5-11. Actually at home i am on adsl so got mixed up as i get same upl0oad and d/w speed. Lets wait to see the upload
If you have a £100+ pm box and 15k SCSI drives, then you will get up & down ultra fast.
We have to remember what these are :)
Its abt 5 mins since i finished the d/w and now its uploading at abt 400 kbps though there are only 27 seeders and 168 leechers. Now do i need to change some settings
You can try to adjust your peer setting in utorrent.Quote:
Originally Posted by jazzyjazzy
http://img165.imageshack.us/img165/1...ettingscf2.jpg
http://img175.imageshack.us/img175/884/overloadif6.jpg
For the cache, it depends on your ram in your box, for these little ovh, i do 150 (the above pic was for a box with 1gb mem.)
All these files are over 8 hours old:
http://img206.imageshack.us/img206/6...eedovh1jx3.jpg
Im at about 1TB of traffic in 2 days lol
Here is one showing the download speed of the torrent, then the upload speed of it. I stopped all but two torrents to show upload speed between two, then just that one alone, when Downloading, I was the only leecher besides some guy with a 80kb/s download speed from what I could see in the peer. Once I finished and put on another tracker...shaazam:
http://img206.imageshack.us/img206/7...eedovh2vb9.jpg
And here it is a few minutes later to show that its constant and not peak.
http://img522.imageshack.us/img522/7...eedovh3qz4.jpg
I'm getting about 10mb/s down and 2 or 3 mb/s up. I'm uploading on ScT and BitMeTv
Remember while your downloading, your up wont be so hot due to hardware holding ya back...so once you finish downloading youll cruise.:DQuote:
Originally Posted by Wormtail
Yes, i'm uploaded 6gb on ScT till yesterday on 1 dvdr ( i know its not much but helps ). On BitMeTv is really really hard to see because i'm not here when the TV-series are released
Heya
I installed fluxbox, removed everything in the startup file and then restarted vncserver and logged in. I see fluxbox, but nothing else. No box to write anything in or nothing. So how do I do now to start utorrent?
Going to the gym now will be back tonight trying to get this to run, linux is hard haha.
Ah ok right click on the desktop, and then clickQuote:
Originally Posted by Actatoi
xterm
Thats your terminal, now type
"wine utorrent"
if it starts...awesome...if it doesnt and brings up an error thats something like: cant find in specified folder system32.....
log into your server from ftp, go to root, wine, c drive, program files, utorrent, and copy the utorrent.exe to the folder that was displayed in the error
"wine utorrent" in the terminal again, and it should start utorrent
read through the thread for the webui set up steps.
remember, when you upload the webui.zip you leave it in the .zip and you put it in application data folder...NOT program files folder
hey can anyone help me wine command isnt working on cent os. can anyone help me??
wine utorrent.exe is not being recognised it says wine unrecognised command pls help fast!!!!!!!
Are u sure wine is installed on ur server?Quote:
Originally Posted by DownShift
log into ur server via putty and type yum -y install wine
i did tat it dint work :(
Ok so you definitely HAVE xterm wine vnc-server installed on your server yes?Quote:
Originally Posted by DownShift
Once I know this for sure we can take it from there.
Well i m chnaging my os to fedora now
The commands for Centos and Fedora are the same so just follow this guide>> http://filesharingtalk.com/vb3/f-gui...through-169620
And also read back from the start of this thread.
Good luck
it is much much easier to seed on bitmetv than in sct for me
but box is uber great and it's free. can't be any better than that :D
<3 it
I'm also one of the lucky one with that free seedbox, and i'm trying to set it up.
I haven't any problems for the beginning (update, adduser, disable root, disable ssh keys, windows manager, wine and utorrent, ...)
But i'm having trouble to encrypt a partition. Truecrypt isn't working, and cryptsetup give me this error:
Quote:
Check kernel for support for the aes-cbc-essiv:sha256 cipher spec and verify that /dev/sda2 contains at least 133 sectors.
Failed to write to key storage.
I'm with fedora, and i tried a lot of thing during the past two days (5 or 6 reinstallations ^^) and during my search i think i find some explanation : the fedora kernel of OVH isn't modular and that's why i got this error.
I'm not sure it's really that, so if any one now how to do this (even with another software) feel free to explain it to me ^^
fatcat69, when you get chance, it would be great if you could put together a setup guide for fedora like you did for windows. Your windows seedbox setup rocks, so I know you could do the same for fedora seedbox setup for complete beginners. Thanks!
solved my problem myself
Im assisting another user in making one, he has all the knowledge, I just review and do simple edits and add screenshots here and there.:lol:Quote:
Originally Posted by torbits
Should be done by the end of the weekend...its pretty hefty.
Awesome, thanks fatcat.
when i try to transfer file from server to my home pc through cuteftp (trial version) my speeds are only 25kbps while my home connection can easily handle 50 kbps. I also tried winscp with same result. any help for this
Using cuteftp, set it to do a multipart transfer like in my guide in my signatureQuote:
Originally Posted by jazzyjazzy
then it will max out.
& increase the connections to =
30k per connection
x your max bandwidth
then double it for latency & redundancy
so in your case 4 connections.
do i need to install at server side also
http://www.tutorial5.com/content/view/146/51/
^^^Follow that guide :o ^^^
On the kimi boxers change the video driver from "VMware" to "sis" [will become apparent during the guide
Before you get all excited you need to change the boot mode to 5
type :# init 5 [ENTER] - this allows "home user mode"
BUT ITS NOT Permanent
So you need to change the etc/inittd to 5 too
Job done :D
This will allow you a shiny new GUI using KDE and VNC
ok trying it now. I have six torrents running in webui but now when i try to add more torrents its not happeing. new torrent doesnt appear at all.
Also i am using 8080 as my port in utorrent, should i change it
Yes, read this thread all the way through, then you wouldn't have had to ask that question.Quote:
Originally Posted by jazzyjazzy
Look for vsftpd.
I suspect you can't add more torrents because you ran out of HD space. Set uTorrent to save to /home, which is where most of the HD space (about 140GB) is located.Quote:
Originally Posted by jazzyjazzy
its pointed at /home and torrents isnt showing disk error
Did you move the old torrents from before you changed the download directory?Quote:
Originally Posted by jazzyjazzy
ya i started downloading after changing the path only after clearing the old downloads and setting the new path. I am clearing some space to see if space is a problem
how do i check how much space is left
http://www.go2linux.org/df-linux-command-line-disk-free
df -h
is normal quick option
result is this when i run the command
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 2.9G 2.9G 0 100% /
/dev/sda2 144G 36G 101G 26% /home
/dev/shm 105M 0 105M 0% /dev/shm
I bet you still have them torrents in your old location, otherwise why else would you have 0% left?Quote:
Originally Posted by jazzyjazzy
if you say so, where are they stored by default, tell me the path and will try it out.
PS : you guys are really helping me out, thanks