Printable View
I'm seeding at PP right now with 40 kb/s which is fine, but I'm not even connectable / port forwarded.
I've followed the guides for my router at portfoward.com but they're still not fowarded for some reason. If anyone wants to help me I'll tell them step by step what I did.
Thanks. I'd really appreciate it so I can download / upload faster.
Make sure u read the FAQ on the torrent site in question and make sure ur using a good port and not one thats blacklisted, then when ur happy ur using a good port, close and restart ur client..and log out of ur site and back in again and hopefully u'll be connectable.
I mean make sure ur using a good port in ur client as in utorrent ect...
What router do you have?
What bt client are you using?
This info is necessary to even begin to try and help you also since you already tried to forward them your self maybe post the link to the guide you used would be of help and anymore info you feel is relevent.
Linksys WRT54GS
Yeah I heard it had a lot of problems with port forwarding so I upgraded the firmware.
And I'm using Utorrent. Used to use Azureus but a lot of trackers banned it.
Ok did you setup a static IP address by following this guide-> http://www.portforward.com/networking/staticip.htm after you chose what ports you wanted to forward in utorrent.
The portforward guide you need to follow is at the link below.
http://www.portforward.com/english/r...S/Utorrent.htm
do that and if you get stuck at a certain point of the guide just come back and post the problem you are having or a question that might help us clear up any confusion you might be having with the process.
And like always the more info provided of the problem you are having the better someone here could help you.
I'm a bit of a newb at this prt forwarding stuff, but I struggled for ages with all the guides until I finally turned UPnP on, on both the Router and uTorrent and woohoo! finally connected!
may be worth a go
I juist came across this link over at the utorrent webpage you might want to take a look and see if that would help your situation any.
http://www.utorrent.com/faq.php#Spec..._GL_GS_routers
Utorrtent site wrote:
The following note does NOT apply to WRT54G/GS v5 and up! Use the latest official firmware (1.00.9+) with those, they do not suffer from this specific problem (though they do suffer from different problems).
so if you have that firmware it probably will be of no help but hey you never know. ;)
I did download the new firmware / fix
And so if I enable UpNP mapping, will everything be fixed? Do I still need to set up a static IP?
are you using utorrent? click options -click speed guide -click test port...
are you blocked? could be firewall...
disable firewall and test again.
Hey bro...is it best to use static ip for torrents?Quote:
Originally Posted by DKre8ive1
It's absolutely irrelevant whether or not you have dynamic or static ip when it comes to torrents, neither of the two has any impact on torrent performance :yup:Quote:
Originally Posted by tweakz
Thanx!Quote:
Originally Posted by jr56It's absolutely irrelevant whether or not you have dynamic or static ip when it comes to torrents, neither of the two has any impact on torrent performance :yup:Quote:
Originally Posted by tweakz
Btw way did u read what happened to my throttling fix?
Oh and i have mine set to auto config dhcp...is that ok?
DHCP has nothing to do with torrents, it's only used to assign you an ip address from your isp and yes it's ok to have it on auto :yup:Quote:
Originally Posted by tweakz
I read your reply, you are being throttled by your isp obviously.
Feel free to PM your isp name and i'll confirm if they throttle or not :)
Also pick a high range port number in Utorrent. do not use the default number as it has many holes and is blacklisted on some sites as well. Good luck!
I also have this router, I had LOADS of problems with it. I had upgraded a the firmware using one of theseQuote:
Originally Posted by virtus134
http://www.polarcloud.com/tofu/
Now be sure you know the risks of upgrading the firmware before you do something wrong. I can say I have used this very firmware over and over with no problems ever and I helped tremendously with all the problems I was having. Good luck
Also it may be a site bug, have you reported your problem to a staff member there? They may be able to help on their end, I actually had the same problem on SCT for a while off and on.