just built this

i've been using the same pc for about 5+ years and it had started acting up the past few months. decided it was time to do a new build.

specs:
Antec Nine Hundred Black Steel ATX Mid Tower Computer Case
CORSAIR CMPSU-550VX 550W ATX12V V2.2 Power Supply
Intel Core 2 Duo E8400 Wolfdale 3.0GHz
ZALMAN 9500A 92mm 2 Ball CPU Cooler
GIGABYTE GA-EP35-DS3L LGA 775 Intel P35 ATX Intel Motherboard
CORSAIR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800
EVGA 512-P3-N801-AR GeForce 8800 GT 512MB
Western Digital 500GB 7200 RPM SATA 3.0Gb/s

that 200mm exhaust fan on top is quite a beast
http://i34.tinypic.com/2re3ztj.jpg

the zalman cooler, some arctic silver and the wolfdale getting acquainted
http://i34.tinypic.com/1zcdcfo.jpg

cabling mess... going to tidy that up when i get some space to work
http://i36.tinypic.com/10r5lqs.jpg

http://i36.tinypic.com/2hef0xl.jpg

http://i33.tinypic.com/qzndyb.jpg

http://i33.tinypic.com/11l682h.jpg http://i33.tinypic.com/nf1jqx.jpg

http://i37.tinypic.com/2vdqkhk.jpg
not sure what's dragging down the video.

http://i34.tinypic.com/iw2g5w.jpg http://i35.tinypic.com/15gpmvo.jpg

nice:) ive got that case, tis really good unless you have a lot in it like me:p ive got my DVD drives at the bottom and HDD's at the top so ive got a clear run of air going to the GPU and also for the CPU to:). Also ive got the added extra two fans so i now have a wind tunnel for my GPU and a fan on the side of the case:P
have you noticed how loud it can be when all the fans are on high? it aint to bad to be fair.
Great stuff there though, hope your enjoying. Are you gonna be using ya new pc for anything specific?

Looks nice.

I see in one screenshot you have the powersaving options enabled (hence the 2MHz chip speed) but in the CoreTemp you have the CPU set to 333 x 8.5 instead of the stock 333 x 9...why is that?

Your vid score is probably down to the drivers.
Did you use the ones supplied with the card or get the latest from nVidia?

Same case I have , only problem is mines hidden in my desk .:dabs:


Nice thing is the beveled front with the two blue fans , easy dust trap . Same price here in Canada too about $119 .00

Great job man it looks great I only see one thing wrong here. In CPU-Z it says your cpu is running @ 2.0 Ghz you NEED to change the multiplier in your bios to 9 as the wolfdale is 333X9=3.0Ghz I have the same CPU, MoBo, Case, HDD, I do have a different CPU cooler though the Enzotech Extreme X but if you have the Samsung DVD Burner I am going to call you my clone :P

Seriously though man change your Bios settings you are wasting the awesomeness that is Wolfdale :) they have some decent Bios updated for the board as well check it out.

Very nice :D

Quote:

---

Originally Posted by Acid_death69

have you noticed how loud it can be when all the fans are on high? it aint to bad to be fair.
Great stuff there though, hope your enjoying. Are you gonna be using ya new pc for anything specific?

---

yea, the fans are very surprisingly quiet. i never used to play games, but i have been testing out the system with crysis. grabbing some more games to test out on it.

Quote:

---

Originally Posted by clocker

Looks nice.

I see in one screenshot you have the powersaving options enabled (hence the 2MHz chip speed) but in the CoreTemp you have the CPU set to 333 x 8.5 instead of the stock 333 x 9...why is that?

Your vid score is probably down to the drivers.
Did you use the ones supplied with the card or get the latest from nVidia?

---

it's just the default settings. i was hoping i'd get a few tweaking suggestions. thanks.

the drivers i downloaded from the nvidia site. it was one that covered about 25 different models, mine included. looks to be version 175.19 for xp.

Quote:

---

Originally Posted by Detale

Great job man it looks great I only see one thing wrong here. In CPU-Z it says your cpu is running @ 2.0 Ghz you NEED to change the multiplier in your bios to 9 as the wolfdale is 333X9=3.0Ghz I have the same CPU, MoBo, Case, HDD, I do have a different CPU cooler though the Enzotech Extreme X but if you have the Samsung DVD Burner I am going to call you my clone :P

Seriously though man change your Bios settings you are wasting the awesomeness that is Wolfdale :) they have some decent Bios updated for the board as well check it out.

---

as clocker said, i am going to change the multiplier. and yes, the samsung dvd burner is on the way. :P i think this is the best bang for your buck you can do right now, hence everyone having similar setups lately.

i also saw suggestions to update the bios on the internet. going to do that soon as well. i'll post some updated screenshots soon.

What OS are you running?

xp pro 32 sp2.

updated the bios to F5. corrected the multiplier.
http://i35.tinypic.com/vdn2j4.jpg

the cpu-z core speed keeps going back and forth between 2000 MHz and 3000MHz with the multiplier going back and forth between x6.0 and x9.0. there is only one multiplier option under the bios. i didn't notice where i could set one for the other core or something.

great, ive got almost the same cooler, only from thermaltake .. its volcano ;)

The multiplier will set the whole CPU not one specific core. There is an option in there somewhere called CPU thermal management you need to disable it or it screws with you :) Also I didn't see clockers post. That dude is everywhere.

Quote:

---

Originally Posted by lee551

the cpu-z core speed keeps going back and forth between 2000 MHz and 3000MHz with the multiplier going back and forth between x6.0 and x9.0. there is only one multiplier option under the bios. i didn't notice where i could set one for the other core or something.

---

In BIOS...
-under "Advanced BIOS" options, disable "C1E"
-under "Motherboard Intelligent Tweaker", disable "C.I.A.2".

These two power saving settings throttle back the cpu speed (by switching the multiplier) when the chip is not under load.

You are using a very old version of RealTemp. Get the new version here.
The thread is ridiculously long but contains all the info you'll need to calibrate the app and set your display options as well as testing your sensor sensitivity.

Now that you're stabilized at 3GHz, it's time to see how low you can set the vCore and remain stable.
I like OCCT for stress testing...set it to "CPU" and run for an hour.