Printable View
Well, bought an ATI graphics card, connected it up and all is good and well apart from one thing - My CD burner won't work any more (all burning processes fail with a Track Following Error).
Could this mean that the graphics card is using up too much power and that the CD burner can't get enough to finish (or even start) any burning process? What can be done about this?
Thanks.
idk if wat u said is the reason but if its that
disconnect grafix card and try burning
if it works u mite just have to get a power supply that supports momre watts
Specs homeboy? What PSU do you have? Might even be a faulty cable too you know. If you do disconnect the GFX card does it burn correctly or what?
If I disconnect the GFX card, how will I see anything on the screen? :lol:
Specs:
Field Value
Computer
Computer Type ACPI Multiprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 6.0.2900.5512
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name RAFI-18B01231E1 (Rafi)
User Name Rafi the Great
Logon Domain RAFI-18B01231E1
Date / Time 2008-10-28 / 22:25
Motherboard
CPU Type Intel Pentium 4 530, 3000 MHz (15 x 200)
Motherboard Name Asus P5P800S (5 PCI, 1 AGP, 2 DDR DIMM, Audio, LAN)
Motherboard Chipset Intel Breeds Hill i848P
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (11/03/04)
Communication Port Communications Port (COM1)
Communication Port Bluetooth Communications Port (COM13)
Communication Port ECP Printer Port (LPT1)
Display
Video Adapter ATI Radeon HD 3850 (512 MB)
Video Adapter ATI Radeon HD 3850 (512 MB)
3D Accelerator ATI RV670 Pro
Monitor Samsung SyncMaster 710M/710V/MagicSyncMaster CX701BM/CX711BM [17" LCD] (H9NX405513)
Multimedia
Audio Adapter Analog Devices AD1888 @ Intel 82801EB ICH5 - AC'97 Audio Controller [A-2/A-3]
Storage
IDE Controller Intel(R) 82801EB Ultra ATA Storage Controllers
IDE Controller Intel(R) 82801EB Ultra ATA Storage Controllers
Storage Controller SCSI/RAID Host Controller
Floppy Drive Floppy disk drive
Disk Drive WDC WD1600JD-00HBB0 (149 GB, IDE)
Disk Drive WDC WD3200KS-00PFB0 (298 GB, IDE)
Optical Drive HL-DT-ST DVD-RAM GSA-H55L (DVD+R9:10x, DVD-R9:10x, DVD+RW:20x/8x, DVD-RW:20x/6x, DVD-RAM:12x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)
Optical Drive SL7424P UPT201S SCSI CdRom Device
Optical Drive SL7424P UPT201S SCSI CdRom Device
Optical Drive SL7424P UPT201S SCSI CdRom Device
Optical Drive SL7424P UPT201S SCSI CdRom Device
SMART Hard Disks Status OK
Partitions
D: (NTFS) 30059 MB (6750 MB free)
E: (NTFS) 305234 MB (18462 MB free)
F: (NTFS) 122558 MB (5674 MB free)
Total Size 447.1 GB (30.2 GB free)
Input
Keyboard Microsoft USB Dual Receiver Wireless Keyboard (IntelliType Pro)
Mouse Microsoft USB Dual Receiver Wireless Mouse (IntelliPoint)
Network
Primary IP Address 10.0.0.1
Primary MAC Address 00-0B-6B-01-29-CD
Network Adapter 802.11g USB 2.0 adapter (10.0.0.1)
Network Adapter Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
Network Adapter Microsoft TV/Video Connection (0.1.0.5)
Peripherals
Printer Canon PIXMA iP2000
Printer Lexmark E240n
Printer Microsoft XPS Document Writer
Printer Send To OneNote 2007
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB1 Controller Intel 82801EB ICH5 - USB Controller [A-2/A-3]
USB2 Controller Intel 82801EB ICH5 - Enhanced USB2 Controller [A-2/A-3]
USB Device 802.11g USB 2.0 adapter
USB Device Broadcom 2045 Bluetooth 2.0 USB-UHE Device
USB Device Generic USB Hub
USB Device Generic USB Hub
USB Device Intel(r) PC Camera CS110 #6
USB Device USB Composite Device
USB Device USB Human Interface Device
USB Device USB Human Interface Device
USB Device USB Printing Support
DMI
DMI BIOS Vendor American Megatrends Inc.
DMI BIOS Version 1001.013
DMI System Manufacturer To Be Filled By O.E.M.
DMI System Product To Be Filled By O.E.M.
DMI System Version To Be Filled By O.E.M.
DMI System Serial Number To Be Filled By O.E.M.
DMI System UUID 9CAB1AAC-CC53D911-953CAB40-AD3E8E70
DMI Motherboard Manufacturer ASUSTeK Computer Inc.
DMI Motherboard Product P5P800S
DMI Motherboard Version Rev 1.xx
DMI Motherboard Serial Number MB-1234567890
DMI Chassis Manufacturer Chassis Manufacture
DMI Chassis Version Chassis Version
DMI Chassis Serial Number Chassis Serial Number
DMI Chassis Asset Tag Asset-1234567890
DMI Chassis Type Desktop Case
DMI Total / Free Memory Sockets 2 / 0
Problems & Suggestions
Problem Disk free space is only 6% on drive E:.
Problem Disk free space is only 5% on drive F:.
lol good point, but doesn't the mother board have like an integrated graphic card.
Hmm I did get the PC with a graphics card already installed (though got rid of it now that I have the new one), so no idea how I'd go about doing what you suggested.. Am positive though that the burner worked before the GFX card was installed..
I assume you're using Nero?
Here's what Nero has to say:
It's a long list, but you may see something familiar there.Quote:
Track following error
This error message appears for one of the following reasons:
* The CD Writer has problems writing on the CD-R/RW. Please resort to another brand mark of CD-R/RW. Please ask the vendor of your CD burner for recommended brands of CD-R/RW. You will also find information in problematic CD-R/RW.
* The power supply of your computer is not providing enough power.
* You are using an external device. Please check the power supply and for test purposes install the burner in the computer.
* Numerous graphics cards require a lot of power. The same goes for numerous CPUs and some hard disks.
* The mains cable or the plug is defective. Please use another plug cable for test purposes.
* The computer vibrates to such an extent that the laser can not stay in the track. In particular if a CD-ROM drive is being used as the read drive.
* The device has become hot - only operate in cool conditions.
* If you have one of the following CD writers:
Grundig CDR100IPW, HP 4020, Kodak CDR240, Mitsubishi CDVR2X4, Mitsumi CD-R CR-2401TS, Philips CDD2000, Plasmon CDR4220, Plasmon RF4100, Plasmon RF4102, Wearnes CDR-432
or are using one of the following:
HP 6020, Mitsubishi CDVR2X6, Mitsubishi CDVR, Philips CDD2600, Wearnes CDR-632P
then it could be a case of the well-known grease problem. In particular if the error has only been occurring recently. Other CD Writer are also affected, in which it may help to grease the axles with silicon grease (Warning: We don't guarantee anything!) Further information on this is available.
If your CD burner is in the first group, go to http://village.flashnet.it/~fn023975/cdd2000.html (Information on how to fix
the Philips CDD2000 'Spring problem'). Users report that firmware 1.25 reduces the problem.
If your CD burner is in the second group: http://www.geocities.com/SiliconValley/Bay/6893/fix.htm
* The lens of the write laser is dirty.
* The CD-R itself is not clean or is of bad quality. In particular if writing with 8x, conditions like this become noticeable.
* If 80 minute CD-Rs are being used, then the cause can be that the track distance is too small, on the limit of the specification. It is possible that you are using a CD Writer , which has problems writing on these.
* Older driver versions of the file CDR4VSD.VXD (driver from Easy CD) also cause the above mentioned error message
* The error message can also occur if the CD Writer has not been set up correctly. Please set the system settings as described in recommended settings .
* One case is known in which the error message appeared after exchanging the motherboard. After newly setting up the motherboard (including formatting), the problem was solved.
* Or there is a hardware problem.
Seen that list.. Am guessing it's the power supply, but how can I be sure? And if it is, what is the easiest (and cheapest) way to solve it?
Disconnect something other than teh graphics card.Quote:
Originally Posted by tralalala
Basically just disconnect everything from the pc that isn't needed for it to boot.;)
it mite not be relevant, but try like a different version of nero...an older one perhaps. u never kno.
Or try reinstalling Nero , I use to have a lot of problems with Nero . Could be you knocked an IDE cable loose as well .... seen that alot with friends . :lol:Quote:
Originally Posted by k_ichigo
Have you read the Event Viewer Log ?
i've had this issue be4, but it was not the psu. ended up being that my dvd-rw had shit on me.
other things that have happened in the past to fix this were uninstalling nero & the rom. have windows redetect the rom & update the firmware of the rom. then install nero again.
Well its probably the PSU. I would assume that you need a stronger one. May I ask which card you bought? Cause it looks like the PSU is the main problem.
^I posted all the details on page 1..
What happens when buying a new PSU, and how cheap can I get one that will do the job for me properly?
What wattage is your current PSU?
How do I figure that one out? :unsure: Sorry, I'm a hardware novice when it comes to dealing with bits and bobs inside the PC.
it should say on the side of the PSU. XXXX Wattage. Also look at the amp values for 3.3v, 5v, and 12v.
You should check out PSU's from Corsair. They make really good stuff and offers a great "best bang for the buck". The 450 w should be good enough for you.
Is that two cards or one card and a typo?
If it is one card, Ati/AMD recommend a 550W PSU, if it is 2 cards they recommend 750W.
They (and I) also recommend certified PSUs. If you think about it, your whole system depends on the PSU, if it fails how much of your system will it take with it. Definitely not an area where you want to skip quality parts.
Totally agree the PSU is the Nervous system of the rig.
Corsair does make good ones. 620HX modular FTW
You don't need a 550w for a single card like that one. Although if they are two, then a 650 should be quite good enough.Quote:
Originally Posted by lynx
Anyone remember using a psu calculator ? It seems so silly now .
http://educations.newegg.com/tool/psucalc/index.html
It all depends on how good the PSU is and the amps rating on the 12v line mostly.
Good site for PSU reviews http://www.jonnyguru.com/
Seems my mobo is dead from an initial look at it by a technician.. He said he'd be in touch with me by tomorrow (left the machine with him yesterday).. At the worst, will buy a new PC, in which case I'll be back for some serious discussion abou what I should get and for what price. :)