What are jumpers? They seems so complicated, and do you neeed any special equipment for jumpers?
Printable View
What are jumpers? They seems so complicated, and do you neeed any special equipment for jumpers?
Jumpers for what? What are you trying to do?
uhmm... certain hardware in a computer that is not plug and play (self configuring) need to be configured manually through the use of jumpers. i'd really have to know what you wnat to know aoubt them to fully answer the question without going into half a page worth of info. most everything in a modern computer is plug and play and you won't have to deal with jumper settings. the only exception i can think of off hand is the hard drive that needs to be configured as master or slave, and perhapes the motherboard for the processor... and i do say perhapes as in probably not.
Umm lets start with processer/w mobo and the hard drive, do u need to go buy something for jumpers?
This is a picture of jumpers for a hard drive. They are the little plastic pieces.
http://www.harddriveupgrade.com/jump...seup_cr_sm.jpg
jumpers a part of the motherboard or hard drive, they aren't something that you buy. they are like switches (and i am using that just as an example) that are on them that tell them what you want them to do.
jumpers are basically a metally bridge wrapped in a plastic case. jumpers work by "shorting out" 2 connector nodes and are often used for configuration purposes.
most commonly seen on hdds where you have to set the hdd to be a master or a slave on an IDE bus
So basically it's just going to the bathroom and turning the light on and off?
yeah....
if that helps....
:D
i used the switch thing to make it kind of easier to understand, it's just a little piece of plastic with a wire in it. the only thing that really uses jumpers anymore are hard drives (which is very simple and they usually have the settings printed on them) and some motherboards.
Now i understand because i remember i had an old sound blaster 16 and i was rearanging the rubber thing on the the metal pins wher's a drawing tells you where to put the rubber things, i get it nowQuote:
Originally posted by dingoBaby@20 September 2003 - 23:26
This is a picture of jumpers for a hard drive. They are the little plastic pieces.
http://www.harddriveupgrade.com/jump...seup_cr_sm.jpg
that's it, and for the most part a hard dirve is the only thing that still uses jumpers
Erm. Sorry to be picky, but also cd/dvd drives and motherboard reset cmos switch are still the norm.Quote:
Originally posted by Broken@ 21 September 2003 - 06:39
that's it, and for the most part a hard dirve is the only thing that still uses jumpers
:)
EDIT:-
Not forgetting wooly jumpers:-
http://www.sighost.us/members/spicydel/jumper.jpg
http://www.sighost.us/members/spicydel/jumper2.jpg
Sorry :(
I was waiting for the wooly jumper reference :D
sorry t0 be even more picky...but the little plastic thingys are not the jumpers. They're called shunts.
http://www.sighost.us/members/spicyd...a%20jumper.jpgQuote:
Originally posted by Sparsely@ 21 September 2003 - 16:20
sorry t0 be even more picky...but the little plastic thingys are not the jumpers. They're called shunts.
http://www.sighost.us/members/spicydel/definition.jpg
They can be called both a jumper, and a shunt.
:)