Printable View
Can someone tell me where i can get an idiots guide to overclock your cpu?
I have a 1.33GHx AMD Athlon Proccessor with 384KB On-Chip Cache Memory
640MB RAM. I would like to see if i can overclock it without f**King up my cpu.
Again I would like an idiots guide to overclocking my cpu
Thanks
1st off, lets get a full detailed version of ur comp specs. but the basics r u go in to bios, and into adv settings, for for me, bios settings, and u change the clock speed. i think since u have an amd, u can change the clock multiplyer too, so u can oc much easier than the intel processors. word of caution, ocing will void ur warranty. my comp company said that i'm fine unless i burn the cpu. my idle's 36 for my P4 2.4ghz @ 2.6, so i'm fine. since ur new, u should take things nice and slow. for more very detailed info, go to www.extremeoverclocking.com or overclocking.com. great reference articles and forums there
My sys specs are http://catracho.250free.com/MYSystem.JPG
I always thought you had to open up the cpu and mess around with soildering and stuff to unlock something and overclock it :huh:Quote:
Originally posted by abu_has_the_power@18 October 2003 - 04:42
1st off, lets get a full detailed version of ur comp specs. but the basics r u go in to bios, and into adv settings, for for me, bios settings, and u change the clock speed. i think since u have an amd, u can change the clock multiplyer too, so u can oc much easier than the intel processors. word of caution, ocing will void ur warranty. my comp company said that i'm fine unless i burn the cpu. my idle's 36 for my P4 2.4ghz @ 2.6, so i'm fine. since ur new, u should take things nice and slow. for more very detailed info, go to www.extremeoverclocking.com or overclocking.com. great reference articles and forums there
Is that right? All I have to do is go into bios and change the cpu speed? Thanks for any help in advance :D
I always thought you had to open up the cpu and mess around with soildering and stuff to unlock something and overclock it :huh:Quote:
Originally posted by Catracho+18 October 2003 - 04:01--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Catracho @ 18 October 2003 - 04:01)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-abu_has_the_power@18 October 2003 - 04:42
1st off, lets get a full detailed version of ur comp specs. but the basics r u go in to bios, and into adv settings, for for me, bios settings, and u change the clock speed. i think since u have an amd, u can change the clock multiplyer too, so u can oc much easier than the intel processors. word of caution, ocing will void ur warranty. my comp company said that i'm fine unless i burn the cpu. my idle's 36 for my P4 2.4ghz @ 2.6, so i'm fine. since ur new, u should take things nice and slow. for more very detailed info, go to www.extremeoverclocking.com or overclocking.com. great reference articles and forums there
Is that right? All I have to do is go into bios and change the cpu speed? Thanks for any help in advance :D [/b][/quote]
open ur cpu? ur NUTS. lol, really u don't have to know hardware too much to know how to oc. it's still dangerous, but it's not that hard. ok, dude, ur specs are fine. we have the same bios. so go into bios, and under bios settings, there should be an option to change clock speed. u might have different than mine cuz u have amd and i have p4. check it out. i just started to oc a couple weeks ago, and so far, my 2.4 @2.6 has had no problems at all.
I always thought you had to open up the cpu and mess around with soildering and stuff to unlock something and overclock it :huh:Quote:
Originally posted by Catracho+17 October 2003 - 23:01--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Catracho @ 17 October 2003 - 23:01)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-abu_has_the_power@18 October 2003 - 04:42
1st off, lets get a full detailed version of ur comp specs. but the basics r u go in to bios, and into adv settings, for for me, bios settings, and u change the clock speed. i think since u have an amd, u can change the clock multiplyer too, so u can oc much easier than the intel processors. word of caution, ocing will void ur warranty. my comp company said that i'm fine unless i burn the cpu. my idle's 36 for my P4 2.4ghz @ 2.6, so i'm fine. since ur new, u should take things nice and slow. for more very detailed info, go to www.extremeoverclocking.com or overclocking.com. great reference articles and forums there
Is that right? All I have to do is go into bios and change the cpu speed? Thanks for any help in advance :D [/b][/quote]
That depends on the bios, and on the CPU.
But a 1333Mhz processor, are those even AMD XP's? has to be like a 1600+ if it is.
Im done. I've oclocked from 1.33 to 1.42 > Dont think i can go farther since when i reboot my computer freezes and reminds me of Windows Millenium It ways I can go up to 1.66 but when I do to 1.43 it starts freezing. Any Ideas as to why it freezes? . Thank you for all your help.
*bump*
Yep that is ya lot if the machine starts to play up its not just taking the clock speed up you have to play with the voltage too go to the sites as posted www.extremeoverclocking.com or overclocking.com.,these will give you info don't forget not all motherboards are the same.Memory is another factor need 133 not 100 you will see when you read it all have fun,oh mines been clocked not for over 20 months keep an eye on the temp'don't want to run it too hot. :DQuote:
Im done. I've oclocked from 1.33 to 1.42 > Dont think i can go farther since when i reboot my computer freezes and reminds me of Windows Millenium It ways I can go up to 1.66 but when I do to 1.43 it starts freezing. Any Ideas as to why it freezes? . Thank you for all your help.
Hmm... risking your expensive hardware to get an extra 7% or so performance...
Don't understand it, myself.
nicely said lamsey, but there are many people with my cpu (P4 2.4 c or 2.4 ghz with 800FSB) that have oced it to 3.4-3.8 with water cooling, and 2.8-3.2 with stock fan cooling. i'm only at 2.6, and i don't feel like pushing any further.Quote:
Originally posted by Lamsey@18 October 2003 - 12:00
Hmm... risking your expensive hardware to get an extra 7% or so performance...
Don't understand it, myself.
and dude, ur ram is prob the problem. if not, then ur mobo is old. ur comp is pretty old, no offense. be glad u can go this far. and check ur cpu temp and post here. try using hmonitor or speedfan. great programs for monitoring over longer periods of time.
nicely said lamsey, but there are many people with my cpu (P4 2.4 c or 2.4 ghz with 800FSB) that have oced it to 3.4-3.8 with water cooling, and 2.8-3.2 with stock fan cooling. i'm only at 2.6, and i don't feel like pushing any further.Quote:
Originally posted by abu_has_the_power+18 October 2003 - 14:16--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (abu_has_the_power @ 18 October 2003 - 14:16)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Lamsey@18 October 2003 - 12:00
Hmm... risking your expensive hardware to get an extra 7% or so performance...
Don't understand it, myself.
and dude, ur ram is prob the problem. if not, then ur mobo is old. ur comp is pretty old, no offense. be glad u can go this far. and check ur cpu temp and post here. try using hmonitor or speedfan. great programs for monitoring over longer periods of time. [/b][/quote]
Why is my ram the problem? and mobo? I just bought 640MB DDR RAM PC2100 and my motherboards as well. It supports up to 3GB RAM at 400MHz.
Your processor default speed is 133MHz with a 10x multiplier.
Your ram only runs at 133 MHz, you would have been better advised to get PC2700 (166MHz) or even PC3200 (200MHz) memory.
You have increased the speed to 142 MHz so far.
This means you have increased the memory speed to 142 MHz, the agp speed to 71MHz (from 66) and the pci speed to 35.5MHz (from 33). Any one of these could be causing the problem you mention. You need to look at your motherboard specifications to see if you can lock these speeds down to their normal values.
The other alternative is to change the multiplier, but you may have to unlock the processor core to do that. Look at the links abu gave you for more information.
If you can change the multiplier to 11x, and drop the base frequency to 129MHz, you are at about the same frequency as at present (1419MHz), but the other devices will still be well within tolerance, so you can then try raising the base frequency again. If your processor hasn't packed up by then, you should be able to get up to 1562MHz.
Lynx you know to damn much about this! lol Im gona ask some quesitons...then just answer them with the number
1. Ok! go into the BIOS and change the FSB or the Clock Speed?
2. Do I have to put more voltage into it? or do i not adjust the power at all?
3. Why is his ram running at 133Mhz? Is PC2100 the same speed at PC133?? And does he just need to lock the AGP, PCI's down or the memory too? Isnt highering the memory speed good?
7%? Risking what? In the case of an AMD CPU based system, which tend to run much higher temperatures, I might hesitate to overclock unless I knew I had more than sufficient cooling.Quote:
Originally posted by Lamsey@18 October 2003 - 13:00
Hmm... risking your expensive hardware to get an extra 7% or so performance...
Don't understand it, myself.
However, my experience with overclocing my GPU (well also modifying the driver as well) has given me almost a 30% performance increase (and hey--never had a problem with the hardware once).
Evidence: my non overclocked GPU 277 MHz core / 270 MHz memory DDR
score: 30910
and
here is my overclocked score 360MHz core / 286 MHz memory DDR
score: 37007
Hmmm, is that a bit more than 7%? You tell me.
I don't do much overclocking myself, but I've read up about it and I understand the principles.Quote:
Originally posted by bigdawgfoxx@18 October 2003 - 15:37
Lynx you know to damn much about this! lol Im gona ask some quesitons...then just answer them with the number
1. Ok! go into the BIOS and change the FSB or the Clock Speed?
2. Do I have to put more voltage into it? or do i not adjust the power at all?
3. Why is his ram running at 133Mhz? Is PC2100 the same speed at PC133?? And does he just need to lock the AGP, PCI's down or the memory too? Isnt highering the memory speed good?
1. Usually, the FSB speed is the same as the clock speed, but if they are separate then ideally you adjust the clock speed first, and when you find the limit of stable operation you adjust the FSB speed too.
2. Once you have found the point at which the processor goes unstable, you can try raising the voltage slightly to see if you can then raise the clock speed even further. Take care though, increasing the voltage can dramatically raise the temperature.
3. PC133 was the old definition for sdram running at 133MHz, it is not the same as PC2100. PC2100 is the same as ddr ram running at 133MHz, but since it is DOUBLE data rate it is referred to as DDR266. And since the bus is 64 bits (8 bytes) wide, the bus bandwidth is 266*8 MB/s, which is approximately 2100MB/s, hence the designation PC2100.
Higher memory speeds are good if the memory can handle it, but the chances are that it will not be able to tolerate increases as much as the processor (as in q1), which is why I suggested he should have got higher spec memory. You can increase the voltage of the memory slightly to improve stability, but again this causes a lot of heat and memory does not usually have cooling.
PC2100 runs at 266mhz
http://www.klboard.ath.cx/index.php?showtopic=75053
Can someone help me out on that one please.
Sorry, PC2100 runs at 133 MHz.Quote:
Originally posted by Acecool@18 October 2003 - 17:28
PC2100 runs at 266mhz
However, it transfers data on both the rising edge of the clock signal and on the falling edge of the clock signal, which is why it is called DOUBLE data rate memory. The data transfer rate is therefore 266MHz.
when i bought my bad-ass rig (sorry guys hehe) it came wit a OC'ing program called warpspeed, it displays pc temp, clock speed and FSB, i can tweak it 1mhz or 3mhz burst...i like it pretty well, alltho i dont OC alot....
best advice for n00bs, ONLY DO IT WHEN UR 100%!!! SURE THAT U KNOW WAT UR DOING!!!
FilePirater...You have one kickass system, but the worst graphics card I have ever seen....you upgrading that soon?
ty ty, ya this xmas its gonna be a ati 9800...