Printable View
well, i have receive my cpu. installed it along w/ the heatsink. connect power supply. installed ram. press power button......and nothing
whats oign on? is my cpu defective or is it my mobo? i know its not psu cuz i try the psu from tthe comp im typign htis on and still the same results.
clocker? vb123? some help?
Okay, is your PSU switch to the on position? the - has to be depressed on the little switch, with the O jutting out.
Check that first, that happened to me first time I built one.
Second, is your computer hooked into an outlet that is getting power? (I have had people hook their computer into a surge protector, and hook the surge protector, back into the surge protector), so it never hurts to ask.
Also, make sure your RAM is isntalled in bank 0, or bank 1, if you dont have a bank 0.
And, make sure you are using risers for your motherboard, because if its touching the back of the case it could be shorting itself and not starting.
Also, is you power on switch installed correctly?
It is very easy to have it one pin over on that strip.
Try putting your video card in also.
nope theres not even a switch on the psu that came along w/ the case :lol:
now i have good news and bad news:
bad news:
i though cpu chip was broken when i installed hsf, but it wasnt so after i took off the hsf, the preapplied thermal compound was pretty much gone. so i have to run to store to buy.........a $9.99 tube of thermal paste . and the closet circuit city or compusa is like half an hour drive away. so i have to drive some half an hour in the freaking snowy minnestoa to get a tube of thermal paste then drive back ;)
good news:
i've save a bunch of money on my car insurance by switching to gieco.... :lol: (i should really switch to gieco though...dont even have insurance right now) no the good news is i figure out what went wrong. after checking everything, i decided to check the cmos jumper switch and viola the stupid thing was set on "clear cmos". switch it back and my beatiful case is lit up w/ light and the cpu is running and the system is posting. :lol:
now to get myself a hdd and a nice lcd monitor. i know 5400 rpm is ages agoo but i can get a wd 80 gig 5400rpm for $55 so im thinking of doign that. or sohuld i go w/ the 7200 rpm wd 40 gig for $50?
and some advice on cd-burner and dvd drives. oh and btw, i have decided to go w/ the radeon 9000 pro over the fx 5200. is that a good idea? and plz dont tellme to get something way over those 2 cards like a fucking 9800 pro....getting the 9800 pro would be the total cost of my system when its done :lol: ;)
Err, that really shouldnt effect things, which is kinda odd, I thought it usually just lets you boot up, but it never keeps any of your settings.
Hmm, guess it depends on the setup of the jumper.
*shrug.
Good to hear it worked.
btw, dont apply too much thermal paste!
Raiser,
Go with the smaller but faster HDD unit. No sense bottlenecking your system from the gitgo.
I have a Radeon 9000 Pro card and it's fine. Don't bother with the stock ATI drivers though. Use Omega Drivers..
Just install the card and these drivers and you're on your way. After you install the drivers, go to Control Panel>Display>Advanced and you'll notice that you now have a boatload of new tabs installed. You can play with the settings and even overclock your card from here. My BIOS default was 276MHz and I've been running at 310.5MHz with no stability problems at all. Much better scores in 3D Mark 2001 also.
Makes this forum look really good. :P
k, i was also thinking of getting the smaller hdd becuz now that i have that one, im prob jus gonna use that one for game. so my movies and stuff is going to be on the one im typing this w/. hmmm guess ill go w/ the 9000 pro then. basically i only play games like cs most of the time. could this handle ut2k3? or splinter cell?
oh and would it matter w/ kind of thermal paste im going to use....
hehe and another thing. im not too sure if my fans are installed correctly. should it be sucking the air from the comp and blowing it out? or should it be sucking air from outside the case and blowing it in?
No magic answer regarding the fans, I'm afraid.
Just try different setups and monitor the temps.
Stick with whatever works.
Sorry.
so there isnt a right way to install a fan? u can install it both ways? i mean blow air in or blow air out is up to u?
Oh yes.
Many fans have an arrow embossed on one of the sides which shows the direction of airflow.
If not, just plug it in and hold it up to your face and you can feel the airflow.
Then mount it the way you want.
On the air flow thing.
Lower front of the case, should have a fan taking air in.
Back of the case, as well as top and sides of the case should have fans blowing out.
As for the bottom, depends on your setup, some people have it both ways.
Virtualbody had a good diagram of the airflow for an ATX motherboard, I need to go look for it.
I have not found this to be effective at all.Quote:
Originally posted by _John_Lennon_@24 November 2003 - 19:55
On the air flow thing.
Lower front of the case, should have a fan taking air in.
Back of the case, as well as top and sides of the case should have fans blowing out.
As for the bottom, depends on your setup, some people have it both ways.
Virtualbody had a good diagram of the airflow for an ATX motherboard, I need to go look for it.
How much of this advice is based on personal experience and how much is just "common knowlege"?
I would hesitate to make a hard and fast recommendation on such a individually variable subject.
ok, right now i have the psu fan, the hsf, and one case fan blowing air out from the back of the case. its reading 30c at power up, a couple mins later it went up to 32c should this be something i should be worried about? or is that reasonable. btw, i set the system to auto turn off if it past 60c, is that okay?
That sound just about right to me.Quote:
Originally posted by raiserblade2003@25 November 2003 - 00:15
ok, right now i have the psu fan, the hsf, and one case fan blowing air out from the back of the case. its reading 30c at power up, a couple mins later it went up to 32c should this be something i should be worried about? or is that reasonable. btw, i set the system to auto turn off if it past 60c, is that okay?
It should even start to warm up a bit more.
okay now just ot wait for 4 days for hdd and then go shopping for monitor.
btw, should i buy monitor at stores or online. i dont trust online places (even newegg) to deliver stuff like monitor, especially lcd one.
do u play games at all w/ it. how does it handles the game. do u thnk i oculd play morrowwind w/ this card?Quote:
Originally posted by clocker@25 November 2003 - 00:51
I have a Radeon 9000 Pro card and it's fine.
meh, i decided to throw in $24 extra for a BFG ti4200 64 mb
32?Quote:
Originally posted by raiserblade2003@24 November 2003 - 22:15
ok, right now i have the psu fan, the hsf, and one case fan blowing air out from the back of the case. its reading 30c at power up, a couple mins later it went up to 32c should this be something i should be worried about? or is that reasonable. btw, i set the system to auto turn off if it past 60c, is that okay?
Hell, I'd think I'd died and gone to heaven with temps like that.
What CPU and HSF combo do you have?
i have a 2200+ amd xp t-bred and a speez hsf from newegg for 7 $ but w/ shipping its $12.
32?Quote:
Originally posted by clocker+25 November 2003 - 01:33--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (clocker @ 25 November 2003 - 01:33)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-raiserblade2003@24 November 2003 - 22:15
ok, right now i have the psu fan, the hsf, and one case fan blowing air out from the back of the case. its reading 30c at power up, a couple mins later it went up to 32c should this be something i should be worried about? or is that reasonable. btw, i set the system to auto turn off if it past 60c, is that okay?
Hell, I'd think I'd died and gone to heaven with temps like that.
What CPU and HSF combo do you have? [/b][/quote]
Clocker, those are temps from within the BIOS. No services running at all.
Who gave you the day off VB?
I'll have to try the temp in BIOS thing, see what I read...
What do you mean?Quote:
Originally posted by clocker@25 November 2003 - 22:49
Who gave you the day off VB?
I haven't seen you around until just a while ago.
H World was boring.
Sorry, clocker, I had to help my father sort out some problems with his car. He had a small accident. :(Quote:
Originally posted by clocker@25 November 2003 - 23:51
H World was boring.
Were you forced to reinstall windows?