Holy Shiznit Check This Out

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...9&category=1267



fun with science

Quote:

---

Very powerful. Need planning how to handle it. Every move with it must be monitored. Watch for scissors, watches, forks, knives all around path of movement of magnet. Never try to put it against heavy iron or two magnets together. The force is so great it will crack from an impact. If your hand would be between magnet and heavy iron or worse another big magnet, you figure out what would happen. To work with this magnet need two people for safety. It need to be locked after use in wooden or plastic bigger box with iron shielding all around separated by styrofoam. For professional people only

---

that is good

:lol:

it's only a powerful magnet

can you Imagen the mayhem that you could cause, throwing it in a kitchen

Yeah, you could have someone's eye out. ;)

let me rephrase you cant just toss this thing, it would rocket out of your hand toward wherever there is metal.
http://www.kjmagnetics.com/feats.html

you could do some serious damage to vhs tapes with a magnet like that couldn't you? and the screen of your tv, isn't it sensitive to magnetic fields? i think it is. keep that magnet away from your vhs tapes, your tv, your monitor, and your cassette tapes. and your floppy diks

Because of strong magnetic strength:

• Rare earth magnets should be kept away at least 10 feet from any computer, monitors, computer hard drive, discs, videotapes, and credit cards.
  
• Special attention should be made with anyone using medical devices such as pace makers. Keep all MDRS™ tools away from all wearing such medical devices. Also certain type of Hearing Aids can be effected and have their settings erased when in close range (2 feet).
  
• Do not keep any ferrous, steel, or magnetic objects within 5 to 6 feet of your work area while using this system. Be specially careful with the metal balls used with the MDRS™.
  
• Be aware of metal objects on your person such as pens, knives, cell phones, pagers, key rings, watches, etc...

Quote:

---

Originally posted by MediaSlayer@27 November 2003 - 20:07
...and your floppy diks

---

and get some porn, it's good for you :P

Quote:

---

Originally posted by muchspl2@27 November 2003 - 22:05
let me rephrase you cant just toss this thing, it would rocket out of your hand

---

In fugleys absence "gnorf".

The description is a bit overstated but just get one to attach to your PC case. <_<

1 2x2x1 inch magnet.

That is 4 inches cubed volume, and it can HOLD A FUCKING TON.

ONE TON. A TON

Quote:

---

Originally posted by muchspl2@27 November 2003 - 20:17
1 2x2x1 inch magnet.

That is 4 inches cubed volume, and it can HOLD A FUCKING TON.

ONE TON. A TON

---

i&#39;ve seen/heard/read more impressive things...as i&#39;ve said before Bose Einstein Condensate :D

yea but you can&#39;t buy it on ebay for 40 bucs <_<

Quote:

---

Originally posted by muchspl2@27 November 2003 - 20:21
yea but you can&#39;t buy it on ebay for 40 bucs <_<

---

there are many things that would be better than a magnet available on ebay for 40 dollars

a ton is alot, that magnet could trap you and squish your insides against a metal object. it should be illegal to be selling it on e-bay, somebody might seriously injure themselves with it.

agreed, look what you could make with it http://hometown.aol.com/dmboss1021/Page300.html


and I see fucked up shit on ebay all the time need radioactive material, but that looks dangerous and fun, really need to be careful if any one buys it


if you had it in your pocket and walked by a manhole it could crush you

that one just sold, heres another
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...6&category=1469


got a cool pic of it holding a freaking engine

http://otherpower.com/ebay/bigblock5.jpg


whoa

Are you really into magnets or something ?

Breaking a pencil really isn&#39;t that impressive, particularly if it takes the force of two of them to do it.

no, just saw it and looked into it

but i don&#39;t think you relize how powerfull these are, these are the end all be all of magnets


http://www.otherpower.com/ebay/bigdisk2.jpg

What use are they to anyone. I am quite sure that industrial strength magnets have a place in .... industry.

However the first time you attached it to something you could never take it off again.

If you attached it to your fridge you wouldn&#39;t be able to remove it, unless you can exert the ton of force needed to remove it, whilst keeping the fridge still. Feck that wouldn&#39;t work, it would pull the whole door off.

You would also risk destroying every piece of electromagnetically stored media which you put it near (like a bulk eraser). Not to mention feck up your TVs and moitors. So you wouldn&#39;t want it in your house

So why on earth would anyone want such a thing.

Quote:

---

Originally posted by J&#39;Pol@27 November 2003 - 23:07
So why on earth would anyone want such a thing.

---

Some plan involving a roadrunner?
http://www.dragg.net/users/pennywitt/wile/wile3.gif

:lol:

Quote:

---

Originally posted by Gurahl+27 November 2003 - 22:12--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Gurahl @ 27 November 2003 - 22:12)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-J&#39;Pol@27 November 2003 - 23:07
So why on earth would anyone want such a thing.

---

Some plan involving a roadrunner?
http://www.dragg.net/users/pennywitt/wile/wile3.gif

:lol: [/b][/quote]
Those magnets are made by ACME? :blink:

Quote:

---

Originally posted by J&#39;Pol@27 November 2003 - 23:07
What use are they to anyone. I am quite sure that industrial strength magnets have a place in .... industry.

However the first time you attached it to something you could never take it off again.

If you attached it to your fridge you wouldn&#39;t be able to remove it, unless you can exert the ton of force needed to remove it, whilst keeping the fridge still. Feck that wouldn&#39;t work, it would pull the whole door off.

You would also risk destroying every piece of electromagnetically stored media which you put it near (like a bulk eraser). Not to mention feck up your TVs and moitors. So you wouldn&#39;t want it in your house

So why on earth would anyone want such a thing.

---

for one I like cool shit that no one else has


and you could easily remove it from something else if you had to just by heating it up

Quote:

---

Originally posted by muchspl2+27 November 2003 - 23:15--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (muchspl2 @ 27 November 2003 - 23:15)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-J&#39;Pol@27 November 2003 - 23:07
What use are they to anyone. I am quite sure that industrial strength magnets have a place in .... industry.

However the first time you attached it to something you could never take it off again.

If you attached it to your fridge you wouldn&#39;t be able to remove it, unless you can exert the ton of force needed to remove it, whilst keeping the fridge still. Feck that wouldn&#39;t work, it would pull the whole door off.

You would also risk destroying every piece of electromagnetically stored media which you put it near (like a bulk eraser). Not to mention feck up your TVs and moitors. So you wouldn&#39;t want it in your house

So why on earth would anyone want such a thing.

---

for one I like cool shit that no one else has


and you could easily remove it from something else if you had to just by heating it up [/b][/quote]
How does that work, the heating up ?

Does heat reduce the strength of the magnetic field ?

it would lose all magnetic properties at 175 degrees cause when you heat a metallic metal like that, the heat breaks down the lattice that holds the molecules in place, and thereby weakens the forces holding the magnetic domains in a north south pattern, and allows them to scramble up, removing the magnets strength.

So when it cool it would just be a neodinum chunk, with very weak magnetic field strength.

To make it strong again youd have to heat it, and then cool it in the presence of a very strong external magnetic field, so the domains will cool in a magnetic north south pattern

this clearly has an amazing purpose...especially for all here...

you store it in its amazing wooden/lined box in a garden shed (no tools, obviously)

then, when the RIAA/MPAA come knocking, bring it into the house, move it near to your pc, and voila...no files left, cos its all mashed up.


hmm, wonder if he has anymore?

Quote:

---

Originally posted by muchspl2@27 November 2003 - 22:19
it would lose all magnetic properties at 175 degrees cause when you heat a metallic metal like that, the heat breaks down the lattice that holds the molecules in place, and thereby weakens the forces holding the magnetic domains in a north south pattern, and allows them to scramble up, removing the magnets strength.

So when it cool it would just be a neodinum chunk, with very weak magnetic field strength.

To make it strong again youd have to heat it, and then cool it in the presence of a very strong external magnetic field, so the domains will cool in a magnetic north south pattern

---

As opposed to a non-metallic metal? :lol: ;)


So would cooling a magnet down increase its strength? :huh:

Quote:

---

Originally posted by vivitron 15@27 November 2003 - 23:21
this clearly has an amazing purpose...especially for all here...

you store it in its amazing wooden/lined box in a garden shed (no tools, obviously)

then, when the RIAA/MPAA come knocking, bring it into the house, move it near to your pc, and voila...no files left, cos its all mashed up.


hmm, wonder if he has anymore?

---

http://www.kjmagnetics.com/



pretty common



@Lamsey re-read it, will not become stronger when cooled

Quote:

---

Originally posted by muchspl2@27 November 2003 - 23:19
it would lose all magnetic properties at 175 degrees cause when you heat a metallic metal like that, the heat breaks down the lattice that holds the molecules in place, and thereby weakens the forces holding the magnetic domains in a north south pattern, and allows them to scramble up, removing the magnets strength.

So when it cool it would just be a neodinum chunk, with very weak magnetic field strength.

To make it strong again youd have to heat it, and then cool it in the presence of a very strong external magnetic field, so the domains will cool in a magnetic north south pattern

---

Simple as that.

Though I suspect that the fridge door may object to the 175C.

How are you re-magnetizing it again, another one of these I suppose.

Quote:

---

Originally posted by muchspl2@27 November 2003 - 16:48
http://otherpower.com/ebay/bigblock5.jpg


whoa

---

It says that it was dropped from 18" above. I bet if it was just a piece of iron dropped then it would also crush the pencil. The wood of a pencil is quite soft.

Quote:

---

Originally posted by muchspl2@27 November 2003 - 14:59
can you Imagen the mayhem that you could cause, throwing it in a kitchen

---

When I first read that I thought you said KITTEN. Imagine the mayhem there...

Quote:

---

Originally posted by phalkon30+28 November 2003 - 06:51--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (phalkon30 &#064; 28 November 2003 - 06:51)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-muchspl2@27 November 2003 - 14:59
can you Imagen the mayhem that you could cause, throwing it in a kitchen

---

When I first read that I thought you said KITTEN. Imagine the mayhem there... [/b][/quote]
that would be www.bonsaikitten.com I don&#39;t condone anything on it, its pretty disturbing if your a cat lover like I am, I have a Persian so it could be a joke site but they went through allot of trouble, makes me think its real :(

I found this little fridge magnet.
http://www.uploadit.org/BillyDean/magnet01.jpg http://www.uploadit.org/BillyDean/magnet02.jpg

I stuck in on the lid of a jar ..
http://www.uploadit.org/BillyDean/magnet03.jpg

... stuck the jar on a can of coconut milk weighing 485 grammes ..
http://www.uploadit.org/BillyDean/magnet04.jpg

... and it lifted it.
http://www.uploadit.org/BillyDean/magnet05.jpg

It took ages to prise it off the fecking fridge&#33;


:)

coconut milk , how does that taste?
Ive never tasted it in my life.. just wondering.

Quote:

---

Originally posted by racer II@29 November 2003 - 00:11
coconut milk , how does that taste?
Ive never tasted it in my life.. just wondering.

---

I use it as the liquid in the curries I make. :P


:)