Printable View
I JUST GOT ALL MY STUFF!!!!!!! MOBO AND TORNADO AND HS. !!!!!! :01: :01: i don't really have time today though. prob have to wait till weekend to put it together. the mobo looks sweet! and the hs is so smooth and shinny. ooooooo
newegg ships like a mclaren on steriods. thanks newegg! ordered sunday afternoon and got it today (Wed). wow!
yeah.....have fun with ur mobo in ur room..... :lol:
just put on the cap before u do :lol:
lol :lol:Quote:
Originally posted by james_bond_rulez@29 January 2004 - 11:32
yeah.....have fun with ur mobo in ur room..... :lol:
just put on the cap before u do :lol:
congratulations, abu. ;)
here's a dilemma i'm having. i got as5 with this. from the artic silver site, they say to put a small amount on the cpu, and that's it. from ppl at extremeoverclocking.com, they say to cover they entire cpu core (square) with a thin layer. spread it out using a credit card. and they put a small bit on the hs.
y r they different? wat do i do? the comps i heard the sp-94 is a different from other hs's in terms of thermal grease. wat do i do?
just covering the core oughta be fine. you don't wanna be able to see the core through the paste, but make sure it's a very thin layer nonetheless. and try not to get any on the bridges.
i think that bit about rubbing it into the heatsink is an optional step which might improve your temperatures, or might not. if you put the heatsink on and you end up getting really high temps, clean the core with rubbing alcohol, let it dry, and try again. applying thermal paste isn't an exact science by any means. ;)
You dont need to cover the entire chip, just the core.
I personally, take a small dab on my finger, and spread it out over the heatsink, starting at center, circular motions until its just a small glaze over it, then I do the same for the core itself of the CPU.
maybe i should follow the instructions on thermalright.com? they say to put a thin layer on both
rub it into the HS with like your hand in a plastic bag...less cleanup lol
ooo that paste must feeeeeel gooooood on ur finger and rubbing it on the cpu and the SUCKET!!.....
abu i'd say ur having fun with this.... :lol:
yea. i'm doing that. wat i need to know is if i should do it like how they did it on thermalright.com or do wat u guys are suggestings.Quote:
Originally posted by bigdawgfoxx@28 January 2004 - 20:52
rub it into the HS with like your hand in a plastic bag...less cleanup lol
DO IT LIKE THAT, THATS HOW MOST PEOPLE DO IT.Quote:
Originally posted by _John_Lennon_@28 January 2004 - 19:34
You dont need to cover the entire chip, just the core.
I personally, take a small dab on my finger, and spread it out over the heatsink, starting at center, circular motions until its just a small glaze over it, then I do the same for the core itself of the CPU.
Do it whichever way you want,it's a P4.They don't overheat,you don't have much to worry about.If you don't like teh results of one way,do it another.
well, from extremeoverclocking.com, most ppl with my mobo and hs and fan end up in the 20s for idle and 30s to low 40s for load, and that's after ocing the thing to 3.5 and 3.6! wow! i've decided to try the spreading thin layer on both 1st. if that don't work for some reason, i'll switch. thanks guys!
btw, any suggestions anyone got for this new system? wat ram timings do u guys recommend? i'm looking at sticking with stock till i really need to oc the ram. any suggestions?
Hey abu, that's great.
I want some pics!
Haha, they dont over heat?Quote:
Originally posted by johnboy27@29 January 2004 - 01:29
Do it whichever way you want,it's a P4.They don't overheat,you don't have much to worry about.If you don't like teh results of one way,do it another.
Take off the heatsink bud, then turn on your computer and post that.
u got a digital camera? i only got a webcamQuote:
Originally posted by adamp2p@29 January 2004 - 01:56
Hey abu, that's great.
I want some pics!
Haha, they dont over heat?Quote:
Originally posted by _John_Lennon_+29 January 2004 - 08:23--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (_John_Lennon_ @ 29 January 2004 - 08:23)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-johnboy27@29 January 2004 - 01:29
Do it whichever way you want,it's a P4.They don't overheat,you don't have much to worry about.If you don't like teh results of one way,do it another.
Take off the heatsink bud, then turn on your computer and post that. [/b][/quote]
I was joking. They don't overheat the way that an AMD does.My XP2200+ took approximately 5 seconds to burn up.The only benefit,inmy eyes to owning a Pentium processor is the fact that they just freeze up when the fan quits.
I was joking. They don't overheat the way that an AMD does.My XP2200+ took approximately 5 seconds to burn up.The only benefit,inmy eyes to owning a Pentium processor is the fact that they just freeze up when the fan quits. [/b][/quote]Quote:
Originally posted by johnboy27+29 January 2004 - 09:55--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (johnboy27 @ 29 January 2004 - 09:55)</td></tr><tr><td id='QUOTE'>Quote:
Originally posted by _John_Lennon_@29 January 2004 - 08:23
<!--QuoteBegin-johnboy27
Quote:
@29 January 2004 - 01:29
Do it whichever way you want,it's a P4.They don't overheat,you don't have much to worry about.If you don't like teh results of one way,do it another.
Haha, they dont over heat?
Take off the heatsink bud, then turn on your computer and post that.
As opposed to a Pentium 4, which takes how long to burn up without a processor fan or heatsink?
Have a little read here and tell me if his processor will survive if the heatsink install goes bad??
i'm having a prob. u guys are saying to spread it out on both the hs and the cpu, and some other ppl are telling me to put a small dab on the cpu core and let the hs evenly spread it out as it's mounted. which way should i go? cuz this other guy says that spread it out will cause air to get into the grease, and it'll not perform as well.
I just put a little squirt on the die of the cpu and spread it around and then let the heatsink spread it the rest of the way.The layer can only be so thick.The heatsink will push any excess out,you know what I am saying?
i think that's wat i'm gonna do. that way there won't be any air in the grease
If I were you right now I would have the thing up and running already.I woulod be trippin out with all the parts sitting there.The night I got my new mobo I had to go to work and couldn't put it in.I planned to do it the next day but decided to do it at 4:30 in the morning when i got home from work.
i'm putting everything together after school tomorow (friday). i got lots of stuff to do tonite. and this might take me 2-3 hrs. i have to take out my old mobo and reconnect everything to the new one. gonna take a few hrsQuote:
Originally posted by johnboy27@29 January 2004 - 21:03
If I were you right now I would have the thing up and running already.I woulod be trippin out with all the parts sitting there.The night I got my new mobo I had to go to work and couldn't put it in.I planned to do it the next day but decided to do it at 4:30 in the morning when i got home from work.