Printable View
I just got a brand new mobo and cpu. I hooked it up and it wont turn on.
I cleared the CMOS, tried every combonition for the plugs that go in the front of the case and nothing works. I tried it in an old case I have and it also would not boot. The power supply is fine, I was just using my other mobo and cpu right before I upgraded :(
Got any ideas?
what hpapens? any lights? beeps? fans move? power switch on back of psu on, and power button hooked up properly?
Absolutely nothing happeneds. Everything (to my knowledge) is hooked up properly. Got the ATX1 and PJ1 cables hooked up to the mobo from the PSU. Just doesnt make sense
What motherboard? Make and model please.
PC Chips M957G
http://www.pcchips.com.tw/PCCWeb/Pro...uID=92&LanID=0
Manual:
http://64.124.27.138/pcchips/manual/m957g/957G_10A.pdf
CPU: Celeron D 2.66 GHz
Do you have the secondary 4-Pin ATX Power connector plugged into the motherboard?
Do you have a fan connected to the CPU fan connector?
A momentary connection to pins #6 and 8 of the SW1 should power up the board.
Yes (if you mean the PJ1 cable)
Yes
Connect them how?
EDIT: I think im gonna go postal :gunsmilie
Yes the PJ1.
Ok
Carefully connect them together momentarily (pins 6 and 8) with a small screwdriver or anything that will complete the circuit. (remember, it's only momentary).
Awesome. Thanks man. :DQuote:
Originally Posted by Virtualbody1234
Seemed alot like hot wiring a car :lol:
Time to OC this mofo.
Cool! Glad I could help.
Check out my OC :P
I still gotta get better cooling (on stock). And my ram is PC2100 :lol: Getting 3700 soon hopefully.