Printable View
I just recently upgraded my memory from 256 ddr 266mhzto 512 333mhz. I want just the 333 stick in but when running it i get loads of problems like windows wont load, coruppted files etc. So i was wondering if it could be somthing to do with my cpu being 266mhz fsb. Is this correct? I put the 266mhz stick in aswell and eveything seems fine when it's running at 266. Can anyone please help me????
Does your motherboard support 333MHz DDR?
Have you set the timings correctly in BIOS?
Sorry i should have put what i am running. Yes my motherboard does support 333 it goes upto 400. It is a giabyte 7vaxp ultra. My Cpu is an Xp1800+Quote:
Originally posted by Lamsey@8 April 2003 - 17:15
Does your motherboard support 333MHz DDR?
Have you set the timings correctly in BIOS?
wait are u putting both of the memorys in ur motherboarD!??! lolz
Your previous memory, did you have 1 stick or 2 in the system? Could it be that the board requires an additional Dimm to be placed on the board, some boards act up with just one stick and an empty Dimm slot.Quote:
Originally posted by ejunkie@8 April 2003 - 11:10
I just recently upgraded my memory from 256 ddr 266mhzto 512 333mhz. I want just the 333 stick in but when running it i get loads of problems like windows wont load, coruppted files etc. So i was wondering if it could be somthing to do with my cpu being 266mhz fsb. Is this correct? I put the 266mhz stick in aswell and eveything seems fine when it's running at 266. Can anyone please help me????
I upgraded a friends motherbaord and it would act up with a 256MB stick and empty slot. I put in a 32MB (same type of ram of course) and she purred like a kitten.
If not the case, maybe bad memory? Check it on another pc or take it back to have it checked..........
at the mo both are in. i have one 333mhz stick and a 266mhz stick, both of which will run together at 266mhz. i want just the 333mhz one to work but it wont. i only stuck the 266 in with the333 to c if it would boot which it has. i have ran the 266mhz by itself for ages util i decided i wanted a 333mhz stick and get shot of the 266 if u know what i mean. it just seems that my system is having problems running at 333 which i know it should'nt. cheked bios setting, all ok.Quote:
Originally posted by Soul814@8 April 2003 - 22:04
wait are u putting both of the memorys in ur motherboarD!??! lolz
What the exact specs off the 333mhz memory stick?
wait i thought that the sticks had to be the same specs for both to be in at the same time...
u say one is 266 and one is 333! they cant run together at the same time....
They can - the 333 stick 'slows down' to run at 266 alongside the other one.
ooo icic.... that just sucks tho lol
that right they are both running together at the mo. but i just want the 333 one to work by itself, thats when i get the problems of my system not booting.i know my motherboard is ok and the memory is ok cause it will work perfect along side my other stick @ 266mhz. i was thinking that maybe the fsb on my cpu is only 266 and it aint compatible with 333mhz memory. what do u think???
It should be fine as long as you have set the timings correctly in BIOS.
A couple of ideas:
- Some motherboards prefer you to put RAM into certain slots. Have you tried switching slots?
- The 333 RAM may be defective at 333MHz while still operational at 266MHz. Try it in another 333MHz machine if you can.
ok i shall try this tomorrowow. i need sleep. cheers for help guys, shall post if still stuckQuote:
Originally posted by Lamsey@9 April 2003 - 22:05
It should be fine as long as you have set the timings correctly in BIOS.
A couple of ideas:
- Some motherboards prefer you to put RAM into certain slots. Have you tried switching slots?
- The 333 RAM may be defective at 333MHz while still operational at 266MHz. Try it in another 333MHz machine if you can.
have a good night... :P lolz... ummm maybe get 2 of the same memories? that would be better if anything