Re: New Hardware on same PC
If you are removing your current dvd-rw (yes it's possible) then that makes it even easier to install your new one. And you will be sure that you have enough plugs to plug in the drive.
Basically remember how everything is hooked up to your current drive, then remove it.
Take a look at the jumper (tiny movable plastic thingy on the back of the drive) and remember it's position (there's 3...master, slave and cable select)
Set the new drive's jumper to that same position.
Put the drive in and hook it up exactly how the old drive was hooked up.
done.
Re: New Hardware on same PC
Does all the hardware come with instructions on how to install (where the jumper is etc.) or should i look for guides on the internet? It is OEM DVD-writer.
Does anyone know anything about memory modules?
Re: New Hardware on same PC
a retail one has instructions, I don't think the OEM does...
all drives look almost identical at the back (apart from colors and sometimes labels, etc.). The jumper isn't hard to miss.
edit: oh ya and all drives have some sort of label or engraving to show how the jumpers go.
Re: New Hardware on same PC
like rossco says, each drive has a tiny illustration of the jumper settings engraved on it. you should be alright just setting all of your drives to "CS" (cable select), meaning that the drive's position on the cable (end connector or middle connector) determines its status as Master drive or Slave drive. in most Windows computers, the arrangement of Master/Slave drives is pretty irrelevant. some people do prefer to manually designate the Master and Slave with the jumpers, though.
as far as moving your old dvd drive to a different computer... a Windows-compatible drive is a Windows-compatible drive is a Windows-compatible drive, basically. nearly all consumer-quality drives are designed to work with Windows' generic built-in drivers, right out of the box. getting a drive from a Windows computer to work in a Mac or Linux computer may be a whole other story, though... as Macs tend to be fussy with non-Apple-approved parts, and Linux driver support can be pretty erratic.
Re: New Hardware on same PC
memory is plug-n-play. just power off your PC and insert it. it will be recognized upon boot-up.
be sure to get the right type.
don't know? use the Belarc Advisor to inventory your hardware...
it's freely available here...
http://www.belarc.com/free_download.html
if you don't know much about PC hardware, buy the retail version of whatever DVD drive you choose. the instructions should be pretty helpful.
OEM means it doesn't comes with any manual, cables, etc. it's not packaged for retail display and usually comes in a plain white box.
good luck.
Re: New Hardware on same PC
One thing to remember about installing memory - actually disconnect the power cord before installing, switching off at the front may not be sufficient. Otherwise with some mobos there is still voltage to the memory and you can damage it.
Re: New Hardware on same PC
Quote:
Originally Posted by harrycary
OEM means it doesn't comes with any manual, cables, etc. it's not packaged for retail display and usually comes in a plain white box.
good luck.
No cables? I trust that the cables to connect to the motherboard (or whatever you connect the drive to) do come with even the OEM version?
Re: New Hardware on same PC
No the cable usually come with the motherboard not the drive.
Re: New Hardware on same PC
Quote:
Originally Posted by browser
No cables? I trust that the cables to connect to the motherboard (or whatever you connect the drive to) do come with even the OEM version?
you will already have the cables anyway.