these are the results from the seatools test:
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
2/25/2006 @ 7:47 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 10/28/02
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
160 GB ST3160023A
Serial Number = 4LJ0AETK
Int13 Num = 81, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 19457x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 19456 160049
Diagnostic Results:
Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000125
Short Test Begin: 25-Feb-2006 18:44:18
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3160023A
Serial Number: 4LJ0AETK
Firmware Revision: 8.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 312581808 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8065024
Estimated PIO Transfer Rates
Min: 2.19MB/s Max: 2.25MB/s Avg: 2.22MB/s
Estimated DMA Transfer Rates
Min: 71.94MB/s Max: 89.93MB/s Avg: 88.08MB/s
SMART Check: Passed
Short Test Passed: 25-Feb-2006 18:45:15
SMART Disabled
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 25-Feb-2006 18:46:00
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3160023A
Serial Number: 4LJ0AETK
Firmware Revision: 8.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 312581808 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 312581808) - Passed
Elapsed Time: 1.02 Hours
Estimated Internal Transfer Rates
Min: 8.32Mb/s Max: 8561.31Mb/s Avg: 367.06Mb/s
PIO/DMA Data Compare
Total Bytes = 20725760
Estimated PIO Transfer Rates
Min: 2.26MB/s Max: 2.32MB/s Avg: 2.29MB/s
Estimated DMA Transfer Rates
Min: 73.75MB/s Max: 122.91MB/s Avg: 91.59MB/s
Long Test Passed: 25-Feb-2006 19:47:23
SMART Disabled
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (160 GB) Local Disc 2) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================
End results from Seagate's DiagATA/SCSI
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 25-Feb-2006 18:46:00
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3160023A
Serial Number: 4LJ0AETK
Firmware Revision: 8.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 312581808 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 312581808) - Passed
Elapsed Time: 1.02 Hours
Estimated Internal Transfer Rates
Min: 8.32Mb/s Max: 8561.31Mb/s Avg: 367.06Mb/s
PIO/DMA Data Compare
Total Bytes = 20725760
Estimated PIO Transfer Rates
Min: 2.26MB/s Max: 2.32MB/s Avg: 2.29MB/s
Estimated DMA Transfer Rates
Min: 73.75MB/s Max: 122.91MB/s Avg: 91.59MB/s
Long Test Passed: 25-Feb-2006 19:47:23
SMART Disabled
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (160 GB) Local Disc 2) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================
I split the results into 2 pieces. It took me 15mins to startup my pc after seatools. If still nothing works, I'll uninstall some programs and maybe format the seagate hdd.
thanks alot for your help guys. really. what do you think? the errors look serious
Looks like the drive passes physical tests.
Make backups of all the data you want to keep and then remove partition(s) from that drive. Repartition and reformat the drive and run the tests again.
I guess I'll do that.
DO you guys know why my pc is so slow?
it took 12 mins to startup, and it takes 30 sec to load FF. also I cant run 2 programs at the same time
I used partition magic, to delete the partition, and format the drive. then I ran seatools again.:
SeaTools Desktop v3.02.03
Copyright (c) 2005 Kroll Ontrack Inc.
2/26/2006 @ 3:58 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 10/28/02
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
160 GB ST3160023A
Serial Number = 4LJ0AETK
Int13 Num = 81, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 19457x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
EXTENDED
1 NTFS 1 19456 160041
Diagnostic Results:
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50328ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 26-Feb-2006 14:57:19
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST3160023A
Serial Number: 4LJ0AETK
Firmware Revision: 8.01
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 312581808 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 312581808) - Passed
Elapsed Time: 1.01 Hours
Estimated Internal Transfer Rates
Min: 8.23Mb/s Max: 658.26Mb/s Avg: 369.76Mb/s
PIO/DMA Data Compare
Total Bytes = 20815872
Estimated PIO Transfer Rates
Min: 2.26MB/s Max: 2.32MB/s Avg: 2.29MB/s
Estimated DMA Transfer Rates
Min: 73.83MB/s Max: 123.05MB/s Avg: 91.49MB/s
Long Test Passed: 26-Feb-2006 15:58:07
SMART Disabled
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (160 GB) ) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in metadata file records
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================
HELP!!!!!
does anybody know if this could be making my pc go soooo slooooooooooowwwwww
thanks
I just realized that theres a five year warranty on the drive
should I send it back? does anybody know what could be making my pc go so slow? I've defragged and scanned for viruses using nod32
seatools says the physical drive is fine, so....
I blame this on Partition Magic :acronisfanboy:
Or a software problem. Maybe a virus, trojan or something like that.Originally Posted by fkdup74
I'm a bit confused about something here. You say you formatted and the PC is so slow. Did you do a fresh install of Windows or are you still running the old setup?
Bookmarks