Xbox controler to pc?

[Duffman]

From what I've heard usb wires are really finicky and annoying, but I suppose with a little research, a soldering iron and a multi meter it could be pulled off.

[Smith]

Yeah aparently usb are 4 wire..the exact same as xbox controlers. So all thats required is a little soldering.

[Duffman]

yeah if i were you I would also put some sort of fuse one there, so if you mix it all up shit doesn't splode or something

[Tempestv]

I know a friend of mine has a converter so he can plug his DDR mats into his computer. I imagion that the same thing would work for controllers. the wires in the usb cables I have worked with weren't difficult to work with. I haven't made a converter like this, I was changing a usb cable from a plug to a pin header so that it would plug into a internal usb port. can't imagion that it would be any different though- i just stripped the wires, and attached them to the wires off the pin header plug in the same order by color as a premade internal usb header. I covered all the connections with heat shrink tubing and then covered the splice with a larger piece of heat shrink tubing, and I have never had problems with the connection coming loose or shorting or anything.

[DanB]

I know you can buy convertors so you can plug your ps2 controller into your pc so its highly likely there is the same thing available for xbox controllers too.

[Smith]

Alright, Im going to make my own..or attempt too. Pics will follow.

[suprafreak6]

nice, im pretty sure ive seen a guide out there

[Virtualbody1234]

http://www.fury-tech.com/en/Guides/X...Conversion-Mod

[suprafreak6]

no solder required

[Smith]

Well I made the cable..works fine. I installed the XBCD drivers..all buttons work in the config program. But when I try to assign the left and right trigger buttons in madden 07..the game crashes.

What should I do?