Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: easy speaker fix help

  1. #1
    suprafreak6's Avatar Suprafreak6 is Back!
    Join Date
    Apr 2005
    Location
    -=U.S.A=-
    Posts
    2,210
    so i got new speakers off ebay, except dumb guy didnt tell me the sub had the middle thing that you can push in, inverted partially how can i make it pop back out
    i know something easy can be done...

  2. Software & Hardware   -   #2
    suprafreak6's Avatar Suprafreak6 is Back!
    Join Date
    Apr 2005
    Location
    -=U.S.A=-
    Posts
    2,210
    i guess ican post some pictures sometime

  3. Software & Hardware   -   #3
    tesco's Avatar woowoo
    Join Date
    Aug 2003
    Location
    Canadia
    Posts
    21,669
    You mean like this, right?
    1114183474QKp7XE.jpg

    I have a speaker that's like that and would also like to know how to pop it back out.

  4. Software & Hardware   -   #4
    suprafreak6's Avatar Suprafreak6 is Back!
    Join Date
    Apr 2005
    Location
    -=U.S.A=-
    Posts
    2,210
    yeah like that that silver thing on mine is partially pushed in...cmon someones gotta know some kinda technique, i was gonna give a straw a really large suck in and give that a whirl

  5. Software & Hardware   -   #5
    suprafreak6's Avatar Suprafreak6 is Back!
    Join Date
    Apr 2005
    Location
    -=U.S.A=-
    Posts
    2,210
    fixed my other problem still need help on that first problem thats up there
    Last edited by suprafreak6; 11-29-2006 at 12:37 AM.

  6. Software & Hardware   -   #6
    tesco's Avatar woowoo
    Join Date
    Aug 2003
    Location
    Canadia
    Posts
    21,669
    Quote Originally Posted by Global Jihad View Post
    i also have another problem, the dude has some of the speakerwire going from the rear right speaker stripped and i tried to fix em up and then put electrical tape over it but that didnt work how can i repatch this and make it work, theres plenty of wire to work with would i need to solder and then tape up?
    You could just strip the wires and wrap them together then tape. You don't have to solder.
    Just make sure they don't touch...you can use marettes if you want or other types of connectors if you have any.

  7. Software & Hardware   -   #7
    suprafreak6's Avatar Suprafreak6 is Back!
    Join Date
    Apr 2005
    Location
    -=U.S.A=-
    Posts
    2,210
    haha so you saw that? or you can revive the dead YOU NECROMANCER! anyone else have an answer to mine and rossco's problem?

  8. Software & Hardware   -   #8
    Virtualbody1234's Avatar Forum Star BT Rep: +2
    Join Date
    Oct 2003
    Location
    Canada
    Posts
    10,763
    A depressed center doesn't prevent proper functioning so just leave it alone. But if you really want to try...

    If the center dome is cloth then use a pin.

    If it's metal then try sticking some strong tape (duct tape) and try to pull it out.

    Gum can work too. Stick it on and let it dry then pull.

  9. Software & Hardware   -   #9
    suprafreak6's Avatar Suprafreak6 is Back!
    Join Date
    Apr 2005
    Location
    -=U.S.A=-
    Posts
    2,210
    interesting
    i guess i could give something a whirl

  10. Software & Hardware   -   #10
    I used a bread tie on mine .I stripped the paper off and bent the end .insert and pull out.BADA-BING.Then a DOT of superglue to close the hole.Your voice coil is under there and its just better to keep it clean

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •