I finally gave up after like 15 minutes.
It's futile, I've tried a knife, and wine bottle opener, a screw driver, smashing it.
It just won't open
I finally gave up after like 15 minutes.
It's futile, I've tried a knife, and wine bottle opener, a screw driver, smashing it.
It just won't open
Biostar XE T5
i5-750 @ 4.0 GHZ stable (CM Hyper 212)
2 x 2GB Cosair XMS3 DDR3 1600MHZ
Radeon 5850 @ 866/1254MHZ
Intel X25-M in RAID 0
WD Caviar Black 2TB in RAID 0
3 x Asus 25.5" VW266H LCD [Eyefinity]
Biostar XE T5
i5-750 @ 4.0 GHZ stable (CM Hyper 212)
2 x 2GB Cosair XMS3 DDR3 1600MHZ
Radeon 5850 @ 866/1254MHZ
Intel X25-M in RAID 0
WD Caviar Black 2TB in RAID 0
3 x Asus 25.5" VW266H LCD [Eyefinity]
not true
Take the hammer and drive the nail through each of the holes. I usually do all of them. Depending on the type of coconut you have this could take a few swings.
Place the coconut over a container and give it some time for the juice to drain. If nothing is coming out you can drive the nail through the other side of the coconut to allow air to enter the top while the liquid drains from the bottom. If your nail bends try using a slimmer one (or even a drill), the hole doesn't need to be big.
http://images.google.com.mx/images?h...-8&sa=N&tab=wi
I use this then throw it to the floor...
Bookmarks