Headphones?
Turn them round on your head, that should sort it.![]()
Headphones?
Turn them round on your head, that should sort it.![]()
well, it is plugged in the right jack anyway.....
Is your head screwed on the right way ?Originally posted by Dalegas@12 August 2003 - 00:50
Rperry:
They are plugged in to the light green jack (the second one, from left to right)
Is not an obvious solution when you are using heaphones like this.
![]()
Edit: Seriously though, there is often an option to swap left and right channels, but I think it is driver dependant so I can't tell you where to look.
.Political correctness is based on the principle that it's possible to pick up a turd by the clean end.
umm maybe the balance is set wrong... i got same sound card n itz right... maybe itz the file ur running!
very funnyOriginally posted by RPerry@11 August 2003 - 21:55
I was going to offer a beer, but sounds like you might have had one too many![]()
![]()
I dont want to turn my headphones.. I want a real solution!
Is all sound inverted, or only when you play a cd ?
If only when you play a cd then it is probable that your cd audio cable in connected wrongly.
What happens when you adjust the balance ? Does the wrong speaker get adjusted ?
If it is the wrong speaker, you have a cabling problem.
Does your m/board have a connector for front panel headphone socket? If so, this is probably where the crossover is occuring. There should be five or six wires - left and right feed, left and right return and 1 or 2 ground wires. The feed wires are reversed, but the return wires are correct.
.Political correctness is based on the principle that it's possible to pick up a turd by the clean end.
Firts of all, the speakers are wrong, the cables are switched.. i guess I'll finally buy a 5.1 system. (not thos crappy 5 bucks speakers....).Originally posted by lynx@12 August 2003 - 12:46
Is all sound inverted, or only when you play a cd ?
If only when you play a cd then it is probable that your cd audio cable in connected wrongly.
What happens when you adjust the balance ? Does the wrong speaker get adjusted ?
If it is the wrong speaker, you have a cabling problem.
Does your m/board have a connector for front panel headphone socket? If so, this is probably where the crossover is occuring. There should be five or six wires - left and right feed, left and right return and 1 or 2 ground wires. The feed wires are reversed, but the return wires are correct.
But let me answer you all those questions:
Whe I tried the balance, the opposite speaker would response.
My mobo is an intel D865PERL there's only the sound card, and the cd drive is only with the ide cable. when I played cd, it was the same, as the problem was about the speakers...
Thx anyway.
Greetings,
Dalegas.
Bookmarks