"I am the one who knocks."- Heisenberg
He is doing great with school, likes it so far.
Lynx you smart smart guy
Not yet. I spent the time I had today cutting holes for my wiring in the MoBo tray and I'm going to drill the holes for the fillport/drain port. Let me ask you guys what you think. Where should the drainport go? Im thinking here
I was also thinking maybe it should be mounted on the bottome of the case?? Im not really sure yet where the best place is for the thing. I also may decide to leave it out too.
I am going to mount the fill port here
I wouldn't drill any holes in that case- ESPECIALLY that case- until you know for certain it's going to work.
"I am the one who knocks."- Heisenberg
Well too late, even if it doesn't work I can always use the fillport so not that big a deal.
Not too many pics today fellas sorry.
Clocker, how much performance loss will I get by making the fans blow through the RAD I don't think I have a choice. I have to keep the PSU to the far side of the case so that the wires will reach and then the rad doesn't fit in the back with the PSU so the only way out I can see is to move the rad to the near side but then I don't want the fans to be in the front because I want to show off my shiny red radiator. So what choice do I have but to blow the air through the rad out of the case, any suggestions would be great
Pics of the Fill port not too shabby
inside
Also today I did manage to come up with a decent "hanger" for my Vid card. I got a piece of 1/8" X 3/8" aluminum and bent a 90 on it and I'm hanging the card suspended from the fan rack on top, easier than I thought too.
I then drilled holes at both ends and screwed the top and used a nut and bolt at the bottom through a hole in the card. I used electrical tape to avoid any shorts just on the part that makes contact with it. What do you guys think?
Bookmarks