Results 1 to 8 of 8

Thread: halp

  1. #1
    Alien5's Avatar μετά BT Rep: +6BT Rep +6
    Join Date
    Jun 2005
    Location
    Posts
    8,406
    im a hardware n00b, i tried to install two of these: http://www.amazon.co.uk/Corsair-TWIN.../dp/B000TPXULC alarm noise keeps bleeping.

    so then i checked the ram i usually have here using the checker app:

    http://www.crucial.com/uk/store/mpar...EF334BA5CA7304

    i want the full amount of ram it can hold, so why can't get the corsair ram to work, should i just get the one they recommend?
    Last edited by Alien5; 02-12-2010 at 11:24 AM.

  2. Software & Hardware   -   #2
    Detale's Avatar Go Snatch a Judge
    Join Date
    Jan 2006
    Location
    Brooklyn, NYC
    Posts
    5,787
    What Motherboard is it bud? Computer specs also please. Also if you are trying to install 4 sticks, try only installing 2 then try installing one at a time and see if one is Fuxored.
    Last edited by Detale; 02-12-2010 at 07:33 PM.

  3. Software & Hardware   -   #3
    Alien5's Avatar μετά BT Rep: +6BT Rep +6
    Join Date
    Jun 2005
    Location
    Posts
    8,406
    Computer:
    Computer Type ACPI x64-based PC
    Operating System Microsoft Windows 7 Ultimate
    OS Service Pack [ TRIAL VERSION ]
    Internet Explorer 8.0.7100.0
    DirectX DirectX 11.0
    Computer Name
    User Name
    Logon Domain [ TRIAL VERSION ]
    Date / Time 2010-02-13 / 15:13

    Motherboard:
    CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3500+
    Motherboard Name ECS GeForce6100SM-M (2 PCI, 1 PCI-E x1, 1 PCI-E x16, 2 DDR2 DIMM, Audio, Video, LAN)
    Motherboard Chipset nVIDIA nForce 6100-405, AMD Hammer
    System Memory [ TRIAL VERSION ]
    DIMM1: Kingston 512 MB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
    DIMM2: Kingston [ TRIAL VERSION ]
    BIOS Type Award (10/16/06)
    Communication Port Communications Port (COM1)
    Communication Port ECP Printer Port (LPT1)

    Display:
    Video Adapter NVIDIA GeForce 6100 nForce 405 (64 MB)
    3D Accelerator nVIDIA nForce 6100-405
    Monitor Jean JT198x7-1 [19" LCD] (7644TI003823)

    Multimedia:
    Audio Adapter nVIDIA nForce 6100-405 (MCP61S) - High Definition Audio Controller

  4. Software & Hardware   -   #4
    Detale's Avatar Go Snatch a Judge
    Join Date
    Jan 2006
    Location
    Brooklyn, NYC
    Posts
    5,787
    OK so when you say it keeps beeping, does it have a patter to the beeping? If so note it and post it here.

    Did you try installing it different sequences as I suggested above? Odds are you got a bad stick of ram bud. To be sure though you have to try them out individually and see if they work one at a time.

    You don't happen to have another computer somewhere that you could try out the ram there do you?
    Last edited by Detale; 02-13-2010 at 06:05 PM.

  5. Software & Hardware   -   #5
    I had an intel motherboard that hated Kingston ram literally burned up my ram. I then went to the intel site and they recommend crucial... mobos are weird but I would always go to the manufacture's site and see what they recommend for your particual board just be on the safe side

  6. Software & Hardware   -   #6
    Alien5's Avatar μετά BT Rep: +6BT Rep +6
    Join Date
    Jun 2005
    Location
    Posts
    8,406
    beep for 1 second...

    stops for a second...

    beep for 1 second...

    stops for a second...


    haven't tried one at a time yet.


    i think i might have to return it and get crucial instead then eh?


    thanks for the reply's.
    Last edited by Alien5; 02-15-2010 at 08:48 AM.

  7. Software & Hardware   -   #7
    yeah or what ever ECS recommends for ram

  8. Software & Hardware   -   #8
    Detale's Avatar Go Snatch a Judge
    Join Date
    Jan 2006
    Location
    Brooklyn, NYC
    Posts
    5,787
    Well how many times does it beep?

    [One Beep]
    DRAM refresh failure
    This may be due to - Bad memory chips
    - A bad DMA Chip
    - Bad memory addressing chips on the motherboard

    [Two Beeps]
    Parity error or Parity Circuit failure
    Your memory may not be seated properly on the mother board.
    Unplug and plug it properly

    [Three Beeps]
    Bad memory or bad mother board

    [Four Beeps]
    Timer failure in the RAM.

    [Five Beeps]
    CPU chip may be dead

    [Six Beeps]
    Keyboard controller may have failed

    [Seven Beeps]
    CPU is dead. Retry the connections and test.
    Replace the whole motherboard.

    [Eight Beeps]
    Video card is missing or Bad.

    [Nine Beeps]
    Damaged ROM BIOS. BIOS chip has to be replaced if it persists.

    [Ten Beeps]
    CMOS shutdown. Replace CMOS memory and associated chips.

    [Eleven Beeps]
    Cache memory test has failed.
    To enable cache memory try CTRL+ALT+SHIFT++.

    [One Long Beep and Three Short Beeps]
    Memory failure

    [One long Beep and Eight short Beeps]
    Video card failure. Try to install video card in another slot.
    Before you send them both back try one at a time bud.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •