What sort of system would get a boost from using ultra fast DDR RAM then?
What sort of system would get a boost from using ultra fast DDR RAM then?
Cpu chips aren't particularly affected by FSB speeds (within reason), it is the overall frequency which affects them. But ancilliary subsystems (AGP, PCI, memory etc) which are working at FSB derived speeds are directly affected.
With sime systems it is possible to clock these subsystems spearatly, but as Lamsey says, it is advisable to keep FSB and memory clock speeds equal to ensure synchronisation and therefore maximum throughput. But overclocking could exceed the capabilities of memory which is already at its designated maximum speed and therefore cause instability. In this case, it is possible that you could have more success in overclocking a system which had faster memory. This is particularly true as you approach the 'cutting edge' of memory/system speeds.
Edit: clarity
.Political correctness is based on the principle that it's possible to pick up a turd by the clean end.
Whats that??? I mean Dual-channel Ram???Make sure you get two sticks, so that you can use dual-channel RAM capabilities.
Dual channel ram is an idea which allows memory transfers to/from one bank while the other bank is being prepared for the next transfer. Effectively it cuts out the set-up latency and therefore speeds up memory transfers.Originally posted by Cygnuz-Y@14 November 2003 - 01:29
Whats that??? I mean Dual-channel Ram???Make sure you get two sticks, so that you can use dual-channel RAM capabilities.
.Political correctness is based on the principle that it's possible to pick up a turd by the clean end.
Not really - it's more efficient to have the FSB speeds and RAM speeds match. You wouldn't get much of a performance boost out of getting ultra-fast RAM. [/b][/quote]Originally posted by Lamsey+13 November 2003 - 19:22--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Lamsey @ 13 November 2003 - 19:22)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-cjsavvy@14 November 2003 - 00:14
Just found a 3000+ with a FSB of 400Mhz for 160 pounds - thats a saving of nearly 100!! Thanks guys!! Is there no point going higher than PC3200??
Woah woah woah there lamsey, your frogetting overclocking.
But yeah, if you get 4200 DDR-Ram, That will give you plenty of room to up the FSB past the 400Mhz that its set at. Of course, I would 4200 Seems a bit extreme for AMD chips, perhaps some nice 3700 Is all you need, seeing as how you wouldnt be able to take full advantage of the 4200 Ram.
Im sorry with out sounding rude do you have more money than brains? How much ram do uou think you need? 512MB
is fine I,d worry more about my video & sound. Are you runnind CAD.?
If he is doing Video editing, 512 is the minimum.
Oh good point then bye a Mac
Whats the best ram for me if i have 800mhz FBSOriginally posted by Lamsey@13 November 2003 - 23:54
If you're buying a 3200+ Barton Athlon XP, I believe the FSB speed is 400MHz. Therefore, the most suitable type of RAM is PC3200, which effectively runs at 400MHz (200MHz x2).
Make sure you get two sticks, so that you can use dual-channel RAM capabilities.
Whats the best ram for me if i have 800mhz FBS [/b][/quote]Originally posted by Cotton+14 November 2003 - 07:42--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Cotton @ 14 November 2003 - 07:42)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Lamsey@13 November 2003 - 23:54
If you're buying a 3200+ Barton Athlon XP, I believe the FSB speed is 400MHz. Therefore, the most suitable type of RAM is PC3200, which effectively runs at 400MHz (200MHz x2).
Make sure you get two sticks, so that you can use dual-channel RAM capabilities.
400 MHz RAM, because it interfaces with your FSB at a ratio of 0.5 : 1
In actual fact, the 800MHz P4 FSB is simple a QDR (Quadruple Data Rate) bus running at an actual clock speed of 200MHz. Combined with DDR (Double Data Rate) RAM running at 200MHz (effective speed 400MHz, or PC3200), they match up well.
Bookmarks