Just Got All Of My New Stuff!

[DWk]

btw.... did u set ur jumper straight?

[bigdawgfoxx]

Originally posted by clocker@27 December 2003 - 17:58
Your mobo manual should have a "beep code" to tell you what that means.
If you don't have a floppy installed make sure that you disable "Floppy seek at boot"

Your boot sequence should be CD then HDD.

Also disable "Halt on all errors"...change that to "Halt on no errors".

Alright ill change the halt thing clocker. Where do you change the floppy seek? what part in the bios?

[DWk]

wat bios do you have?

[bigdawgfoxx]

Um I have them on the same cable...and the CD is prob set to master even tho its on the secondary connector thing...but STILL I wouldnt think that would produce the stop code.

@ Clocker, I see nothing in my manual about a beep code.

[bigdawgfoxx]

Originally posted by DWk@27 December 2003 - 18:01
wat bios do you have?

Award.

[tesco]

normally dont mothberboards say press <X key> to continue hte first time u start it up after it has finished detecting CPU and RAM and drives and stuff? Im pretty sure nie did. Then it takes u to the bios then i never saw it again. Maybe ur bios reset jumper is set wrong?

[DWk]

ok unplung ur hdd and leave the cd drive on master and try to boot up with cd-first

[DWk]

Originally posted by ROSSCO_2003@27 December 2003 - 17:05
normally dont mothberboards say press <X key> to continue hte first time u start it up after it has finished detecting CPU and RAM and drives and stuff? Im pretty sure nie did. Then it takes u to the bios then i never saw it again. Maybe ur bios reset jumper is set wrong?

yea thats what i was thinking....maybe its put to clear instead of keep

[clocker]

....maybe its put to clear instead of keep

Check that for sure.
Then put your HDD on it&#39;s own cable on the primary IDE channel.
CD goes on the secondary IDE channel.

If you read further on DWk&#39;s "benchie" post link, it has a complete description of how the BIOS was set up and Windows was installed....

[bigdawgfoxx]

I am posotive that the jumper is set right...u move it to clear it, then move it back, and then turn the comp on. I followed the directions very good. Ok I will try putting them on diff cables and stuff...be back in a couple of mins...please..no more betting ...prayers will do tho