Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Xp Log On Screen

  1. #1
    Okay, I just installed a few recommended updates from microsofts site. Before i did this my comp loaded right up to my account, as it is the only account on there. Now after the updates, it loads up to a log-on screen so i have to choose the account, and there is still only 1, so this step is absolutely pointless. Any settings i can change to make my comp load up directly to my account (the admin account) without going back and uninstalling the updates?
    I looked around but nothin is jumpin out at me
    Thanks
    Kai

    oh and if this is not supposed to be in softwareworld, mods please move it
    wasn't sure if it was or not.
    Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate

  2. Software & Hardware   -   #2
    Poster
    Join Date
    Jun 2003
    Location
    Yet to be determined
    Posts
    993
    Control Panel -> User Accounts -> "Change the way users log on and off" -> Un-click: Use Welcome Screen

  3. Software & Hardware   -   #3
    no dice NightStalker...
    that just makes it come up with a window where i have to type in my password anyway, just doesnt give me the menu where i can just click a pic, so it's just harder
    but thanks for trying
    anyone else?

    Kai
    Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate

  4. Software & Hardware   -   #4
    peat moss's Avatar Software Farmer BT Rep: +15BT Rep +15BT Rep +15
    Join Date
    May 2003
    Location
    Delta B.C. Canada
    Posts
    10,547

  5. Software & Hardware   -   #5
    Thanks peatmoss!
    I read through it and did what it said, and was under the impression that it had worked, untill it fully logged on to my account, yet all my progs were uninstalled, and everything was gone, ie favorites, temp files, progs, etc, which wasn't relaly what i was looking for
    not sure if this was supposed to happen or not, but it did
    however i reversed it and all my stuff came back
    Thanks though, it's appreciated

    Kai
    Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate

  6. Software & Hardware   -   #6
    peat moss's Avatar Software Farmer BT Rep: +15BT Rep +15BT Rep +15
    Join Date
    May 2003
    Location
    Delta B.C. Canada
    Posts
    10,547
    Kai do you have the guest account disabled ? That might explain it . I think you want it off

  7. Software & Hardware   -   #7
    this is what i got for accounts
    yes guest is off

    maybe the ASP one has to be taken off??
    Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate

  8. Software & Hardware   -   #8
    peat moss's Avatar Software Farmer BT Rep: +15BT Rep +15BT Rep +15
    Join Date
    May 2003
    Location
    Delta B.C. Canada
    Posts
    10,547
    Kai in mine I just have the one, administrator.and guest is off. what is asp net ? I see its limited tho . Hope you remember your password.




    Becarful you delete asp you might loose fav's and other goodies. Im networking two computers but not shareing printer just doc folders you?

  9. Software & Hardware   -   #9
    asp.net
    no idea lol
    also, it has not always been there as i recall
    i know for a fact that i did not create it, thats for sure, and also i am the only one who uses this PC

    I am connected from a router from another comp, but have my own printer (not shared) and am not sharing and docs either
    Q6600 @ 3.42Ghz | Gigabyte EP35-DS3R | EVGA 8800GT 721/1802/2006 w/ Accelero S1 | 4gb Crucial DDR2 @ 760mhz | 750gb Hitachi 7k1000 | Corsair 520HX | 2 x Samsung SyncMaster T240 24" | Windows 7 Ultimate

  10. Software & Hardware   -   #10
    FST Retiree
    Join Date
    May 2003
    Age
    41
    Posts
    606
    the asp.net account is created when you install the .net framework. since that account is now on your machine, it automatically forces you to the welcome screen at startup. it didnt do this before because you only had one account on the machine. if you do not plan to log onto your machine remotley, you can safely delete the asp.net account and everything should return to normal.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •