Page 7 of 14 FirstFirst ... 45678910 ... LastLast
Results 61 to 70 of 140

Thread: Will Your Firewall Stop This?

  1. #61
    99shassan's Avatar Poster BT Rep: +1
    Join Date
    Jul 2003
    Posts
    787
    Should I get Zonealarm Pro from Kazaa and what is the latest version? I can't get on their website. Same reason as I posted before about being unable to go on the symantec website.
    Changed SPAN settings in sig a YEAR after it was removed

  2. Internet, Programming and Graphics   -   #62
    Zone Alarm Pro 4.5.538 with Web Filtering is the latest..download the trial and ill pm u a key if ya want

  3. Internet, Programming and Graphics   -   #63
    fkdup74's Avatar Pneuberator.
    Join Date
    Sep 2003
    Posts
    3,554
    well D, the 'other' f/w failed
    f*cker was a b*tch to configure, musta done somethin wrong
    plus, no matter how many rules i created, port **** was still open
    tried blockin UDP, TCP, ICU, FBI, CIA...........
    just d/l'ed ZA pro and Sygate pro
    i'm gonna get a freakin f/w to pass

    the ICU,FBI,CIA is BS of course
    but seriously, tried every protocol, in & out, unknown, you name it
    this shits givin me a headache
    I am just a worthless liar. I am just an imbecile.
    I will only complicate you. Trust in me and fall as well.
    I will find a center in you. I will chew it up and leave.
    I will work to elevate you just enough to bring you down.

  4. Internet, Programming and Graphics   -   #64
    99shassan's Avatar Poster BT Rep: +1
    Join Date
    Jul 2003
    Posts
    787
    I am currently removing Norton Personal Firewall 2004 Pro, Gonna get what you suggested.

    Can you send me the installation file for the firewall? All the ones that I am downloading are corrupt.
    Changed SPAN settings in sig a YEAR after it was removed

  5. Internet, Programming and Graphics   -   #65
    Here is an ed2k link for the latest version with a working keygen.

    ZoneAlarm.Pro.with.Web.Filtering.v4.5.538-ROR.ShareReactor.zip

    and just in case the board doesnt like ed2k links..

    ed2k://|file|ZoneAlarm.Pro.with.Web.Filtering.v4.5.538-ROR.ShareReactor.zip|5100676|af7ef45e287871221cd5c52a2af489ab|/
    Sorry theres no sig2dat link but most people seem to be using either overnet, emule or edonkey these days. (Only took a few minutes for me with overnetlite)

  6. Internet, Programming and Graphics   -   #66
    Please understand people that i cant configure your firewalls for you so there may be walls that will stop this if the F/walls configured properly..
    No Im not a Zone Alarm premoter,just a user...lol
    hope this was a learning experience for everyone who tried this..
    it sure was entertaining for me..

  7. Internet, Programming and Graphics   -   #67
    99shassan's Avatar Poster BT Rep: +1
    Join Date
    Jul 2003
    Posts
    787
    this thing is slow, is going at a rate of 3.3kb/s
    Changed SPAN settings in sig a YEAR after it was removed

  8. Internet, Programming and Graphics   -   #68
    Rip The Jacker's Avatar Retired
    Join Date
    Nov 2002
    Location
    Los Angeles, CA
    Age
    38
    Posts
    6,236
    Well, I failed with Sygate.

  9. Internet, Programming and Graphics   -   #69
    Poster
    Join Date
    Mar 2003
    Posts
    3,582


    NOOBS!!

    Trojans don't ask you to click buttons so they can take a screen shot while connected to a trusted zone and send it back to a trusted site. No they don't!

    Just because it said "next" doesn't mean it's not an "OK" button.

    You failed the test, not your firewall.

    Hijacked? Hijacked what?

    Hijacked your brains


    I bet every one of you also has NetBIOS over TCP/IP installed too. "file and printer sharing". This isn't for "filesharing" with peer to peer programs, this is for allowing others access to your files and printer with no program and very little authorization needed. WISE UP.

    If you can't figure out how to disable this crap, then at least check your firewall settings for it.

    Sygate: By default, Sygate allows other PCs on a Windows network to browse--but not access--your files and printers. To enable sharing, right-click the firewall's system tray icon and choose Options,Network Neighborhood. From the drop-down list, select the network interface you use to connect to the Windows network, check Allow others to share my files and printer(s), and click OK. Sygate's default setting allows only PCs on the local network to browse and access your files and printers (choose the Security tab to view this and other settings).
    If you have multiple network adaptors or VMware or VPC installed with virtual connections, then uncheck them too. You have to do it for each device.

    I'd recommend computer courses for anyone who didn't figure this out. Sans institute is a good place to start. Lot's of free articles and webcasts and some very good courses.

    Or stay stupid and run off and look for some other software to make up for the damage caused by your abuse of illegal substances



  10. Internet, Programming and Graphics   -   #70
    Originally posted by KrackHead2k@11 January 2004 - 13:32
    Well, I failed with Sygate.
    Dont feel left out mate cause your not alone on that

Page 7 of 14 FirstFirst ... 45678910 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •