ATITool
not tested it yet so dont know how well it works
ATITool
not tested it yet so dont know how well it works
Thermaltake Xaser III
Antec Truepower 430W
Asus A7N8X Deluxe Rev 2.0
AMD Barton 2800+ (@ 3200+)
Aero 7+
1Gb PC3200 Twinmos Dual Channel (@ 6,3,3,2)
Sapphire 9800Xt
2x WD 120Gb Sata in Raid 0
Plextor DVD-Rom 16x
Lite-On CD-RW 52x32x52x
ADI 19" P900 CRT
3dMark03 = 6326
Aquamark = 43767
Automatically finds the max settings for your card......
I will have to try it when I get my main rig back up and running, but for some reason the automativeness of the whole program just seems to take away from some of the fun of the tweaking that goes into computer products.
Put everything to the max.
P4 2.4C / 1024M / R9600XT 128M / 80GB / 400W
Peer-to-peer Programs...
Is this better than Rage3D Tweak??
just tested it out
so far so good...the max settings it found gave no sparklies or tearing in 3dmark03
ive not messed about with the settings on this card yet so im not sure what the max settings i can get it too by tweaking it my self so until ive done this i cant say if it has found the max or not
Thermaltake Xaser III
Antec Truepower 430W
Asus A7N8X Deluxe Rev 2.0
AMD Barton 2800+ (@ 3200+)
Aero 7+
1Gb PC3200 Twinmos Dual Channel (@ 6,3,3,2)
Sapphire 9800Xt
2x WD 120Gb Sata in Raid 0
Plextor DVD-Rom 16x
Lite-On CD-RW 52x32x52x
ADI 19" P900 CRT
3dMark03 = 6326
Aquamark = 43767
didnt do anything i have a 9200se and the ram is 166 defualt, and it went up to over 200 odds and was still going.
it said something asbout modified catalyst drivers, may be that. ill try it anothr time
Hmm my question too good find tho ty BUBBAOriginally posted by Samurai@22 February 2004 - 18:06
Is this better than Rage3D Tweak??
I think so, well for overclocking at least! It will do it for you and automaticly test...I just overclocked mine by alot
[SIZE=1]AMD 4200 X2 @ 2.65Ghz, ASRock 939-VSTA
1.75GB PC3200, 2 X 160GB Seagate w/ 8MB Buffer
HIS Radeon X800 Pro, Antec Super Lanboy Aluminum
I tried the tool it bumped my settings way down i will stick to rage 3d thankyou very much
it looks like its found the maximum clock for my memory pretty accurately (9600pro BTW), but for the core it looks like its incorrectly detecting artifacts - i can't see any myself but the clock speed keeps dropping
if its just a bug and it gets fixed sometime, then this ickle program has good potential - although i kinda agree with the Beatle, it takes away some of the fun of overlocking, but i'm lazy so i like it
also, for some reason i don't like the way you set the clocks in ATITool, i still find Rivatuner simpler
The Sexay Half Of ABBA And Max: Freelance Plants
Bookmarks