Case Problems/heat/ I Dont Know.

[_John_Lennon_]

Is this it then,

http://usa.aopen.com/products/mb/MK77M.htm

[Peerzy]

yes...and no. it looks very alike but has a few tiny differences. And im sure its USB 2.0 not 1.1 and it has 6 usb ports not 4.

Peerzyboy

[tesco]

Originally posted by peerzyboy@6 March 2004 - 14:23
yes...and no. it looks very alike but has a few tiny differences. And im sure its USB 2.0 not 1.1 and it has 6 usb ports not 4.

Peerzyboy

This one?

[Peerzy]

Yes and i looked on my board again and i read it wrong that is the correct name for it as well.

Peerzyboy

[lynx]

First of all you need to make sure you've got the latest bios (version R1.02).

If not, get it here

It is quite possible that your old mobo didn't support your chip. The Athlon XP2000+ would indeed have run at 1667 MHz (12.5*133MHz), but if the mobo did not recognise that latest range of Duron chips it would probably report an Athlon simply because of the frequency.

The only way to be sure is to look at the chip, but it is beginning to look as if you've been had.

[Peerzy]

Originally posted by lynx@6 March 2004 - 20:11
First of all you need to make sure you've got the latest bios (version R1.02).

If not, get it here

It is quite possible that your old mobo didn't support your chip. The Athlon XP2000+ would indeed have run at 1667 MHz (12.5*133MHz), but if the mobo did not recognise that latest range of Duron chips it would probably report an Athlon simply because of the frequency.

The only way to be sure is to look at the chip, but it is beginning to look as if you've been had.

do i NEED thelatest BIOS, everytime i get a new BIOS i hjave to sped a week fixing what iv done, i dont do BIOS's anymore!

Peerzyboy

[tesco]

Originally posted by peerzyboy+6 March 2004 - 16:06--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (peerzyboy @ 6 March 2004 - 16:06)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-lynx@6 March 2004 - 20:11
First of all you need to make sure you&#39;ve got the latest bios (version R1.02).

If not, get it here

It is quite possible that your old mobo didn&#39;t support your chip. The Athlon XP2000+ would indeed have run at 1667 MHz (12.5*133MHz), but if the mobo did not recognise that latest range of Duron chips it would probably report an Athlon simply because of the frequency.

The only way to be sure is to look at the chip, but it is beginning to look as if you&#39;ve been had.

do i NEED thelatest BIOS, everytime i get a new BIOS i hjave to sped a week fixing what iv done, i dont do BIOS&#39;s anymore&#33;

Peerzyboy [/b][/quote]
yeah you will have to get the latest bios, the latest on says it adds support for duron 133 1.4-1.8ghz cpus, yours is one of those.

[Peerzy]

ahhhh shit&#33; i&#39;ll get it 2moro when im less drunk and more not high.

Peerzyboy

[gungrave]

i had a problem like that with my pc.
i got a new hard drive installed it worked fine i installed halo (a coppy) then it restarted my pc cos there was some thing wrong with the game and then when i turned my pc on it didnt work...
so i took out the new hard drive turned it on then it worked turned it off. put the new hard drive back in again then it didnt work. by the time i did this a few times the wire was ripped at the sides from pulling it on and stuff.
so i just went back to using the 1 hard drive but then it started restarting its self cos of the wire was cut stupid thing.
so the next dayh i got a new wire for my hard drive&#39;s and its working fine apart from i had to format the drive but it all works fine shame i lost my games.
but all the music was on my new hard drive

so u should check ur wires and see if theres any thing wrong with them.

all so when i had a problem ages a go it said missing file or crrupt (look at the ram it was half out cos i was messing about with the pc) took it out turned it on. worked fine
next day put the ram back in and all works fine.

so check all ur drives and ram chips and stuff there might be some thing loose? or a wire cut?

[Peerzy]

Right iv updated my BIOS now i downloaded that thing Lyn said and it updated the BISO from windows, and when it rebooted it had the version number as the one iv just updated to but it said CMOS was reverting to default push F1 to contiune and i ddi and here i am.

PS VB1234 could you close my other thread about the RAM problem so that people reply in here and not there