-
Poster
I installed motherboard monitor 5 a min ago, rebooted my pc and ran the program. As soon as i ran the program I got a load noise from my PC (siren noise) and a popup saying my CPU was 88C I knew this wasn't right because my pc would have been gone long ago. However I think the program has put my fan too full speed and i want it back how it was. The fan is now too loud and is annoyin the hell out me! HELP!!
-
-
03-07-2004, 07:46 PM
Software & Hardware -
#2
Poster
using aida32
Originally posted by before install+--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (before install)</td></tr><tr><td id='QUOTE'>Sensor
--------------------------------------------------------------------------------
Sensor Properties:
Sensor Type Winbond W83637HF
Sensor Access ISA 290h
Temperatures:
CPU 43 °C (109 °F)
Aux 35 °C (95 °F)
Cooling Fans:
CPU 1607 RPM
Chassis 1534 RPM
Voltage Values:
CPU Core 3.33 V
CPU Aux 3.12 V
+3.3 V 3.39 V
+5 V 5.11 V
-12 V 0.47 V
-5 V -7.71 V
+5 V Standby 4.53 V
VBAT Battery 2.02 V
Debug Info D0 C3 D4 BE FF BB 00 D0 69 6E FF 63 (01)
[/b]
<!--QuoteBegin-after install
Sensor
--------------------------------------------------------------------------------
Sensor Properties:
Sensor Type Winbond W83637HF
Sensor Access ISA 290h
Temperatures:
CPU 89 °C (192 °F)
Aux 31 °C (88 °F)
Cooling Fans:
CPU 4167 RPM
Chassis 2280 RPM
Voltage Values:
CPU Core 3.36 V
CPU Aux 3.12 V
+3.3 V 3.38 V
+5 V 5.11 V
-12 V 0.47 V
-5 V -7.71 V
+5 V Standby 4.53 V
VBAT Battery 2.02 V
Debug Info D2 C3 D3 BE FF BB 00 D0 51 94 FF 63 (01)
[/quote]
:helpsmile:
-
-
03-07-2004, 08:02 PM
Software & Hardware -
#3
Poster
i restarted my pc and eventually my pc started to quieten down... I now have a headache from the fkin thing though
-
-
03-07-2004, 10:03 PM
Software & Hardware -
#4
Poster
Originally posted by Marius24@7 March 2004 - 18:32
I installed motherboard monitor 5 a min ago, rebooted my pc and ran the program. As soon as i ran the program I got a load noise from my PC (siren noise) and a popup saying my CPU was 88C I knew this wasn't right because my pc would have been gone long ago. However I think the program has put my fan too full speed and i want it back how it was. The fan is now too loud and is annoyin the hell out me! HELP!!
Were you running anything else that monitors temps?
I once had mbm5 and asus probe on at the same time, it caused faulty readings.
The bloody alarm went of at 3am and woke up the whole house.
-
-
03-07-2004, 10:09 PM
Software & Hardware -
#5
-
-
03-07-2004, 11:02 PM
Software & Hardware -
#6
Poster
What do you have that is already controlling your CPU fan? Seeing as how its only running at 1600RPM.
-
-
03-07-2004, 11:11 PM
Software & Hardware -
#7
Poster
Originally posted by _John_Lennon_@7 March 2004 - 22:02
What do you have that is already controlling your CPU fan? Seeing as how its only running at 1600RPM.
nothing
however the reading was taken when the cpu wasn't under and strain. I have heard it go up by itself when my cpu is heavily used. I have had the PC a few years and had no problems
-
-
03-07-2004, 11:44 PM
Software & Hardware -
#8
Poster
Could you give us the specs on your computer?
-
-
03-08-2004, 12:01 AM
Software & Hardware -
#9
woowoo
mbm is probably reading the wrong sensor. first set teh alarm settings to make it not go off when the cpu gets too hot, then go to temperatures and find cpu then change sensors until you get the right temp.
-
-
03-08-2004, 12:02 AM
Software & Hardware -
#10
Poster
Hehe, it happened to me too, I simply uninstalled it.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks