Dvd 2 Vcd-the Guide

[BC-UK Will Live]

DVD to VCD-The Complete Guide

When I first got my DVD Burner I realised it was going to cost me a fortune in DVD-R’s so I thought I would see if it was possible to convert them to mpeg so I could then burn them to VCD. And with some help from the
K-Lite Board I can now do that.

So I thought I would make this guide to help everybody else who wants to convert.

Aldso check out these guides:

Easy VCD
KVCD Guide-Manual

I’ve made this as simple as possible so here it goes.

Hope this helps some people.

Some people have told me its easier to use DVD2SVCD but people have said that its to hard, wont work or poor quality.

If any of the pictures aren't clear just click on them.

You will need:

DVD-Rom
CD Writer
DVD Decrypter
DVD 2 AVI
Tmpgenc
VCD Burning Software (like Nero)

You can download the ones in blue from www.dvdrhelp.com/tools Pm me for a Tmpgenc Seriel

You can download Nero from Nero Home Pm me for a seriel

Step One:

Get all of the above

Step 2:

Insert the DVD you wish to convert into your drive and load up DVD Decrypter which should look like this:


Image Resized
[img]http://www.talkpets.com/upload/d1.GIF' width='200' height='120' border='0' alt='click for full size view'>

Step 3:

Now we need to select the main movie files.

Image Resized
[img]http://www.talkpets.com/upload/b.GIF' width='200' height='120' border='0' alt='click for full size view'>

Step 4:

You will now notice only a few of the files are selected (these are the main movie files) Now we need to choose where we are going to save our movie and then we are ready to Decrypt. (See Picture Below).

Image Resized
[img]http://www.talkpets.com/upload/b1.GIF' width='200' height='120' border='0' alt='click for full size view'>

Step 5:

This screen will load up and just wait for DVD Decrypter to finish:

Image Resized
[img]http://www.talkpets.com/upload/d4.GIF' width='200' height='120' border='0' alt='click for full size view'>

Step 6:

Once DVD Decrypter has finished you need to open up DVD 2 AVI which should look like this:

[BC-UK Will Live]

Step 7:

Now we need to open the video files we just created using DVD Decrypter, once selecting the first file the other movie files should open automatically.

Image Resized
[img]http://www.talkpets.com/upload/d6.GIF' width='200' height='120' border='0' alt='click for full size view'>

Image Resized
[img]http://www.talkpets.com/upload/d7.GIF' width='200' height='120' border='0' alt='click for full size view'>

Step 8: Now that your files are loaded we need to make sure the audio settings are correct.

Select the same as below:

Image Resized
[img]http://www.talkpets.com/upload/d8.GIF' width='200' height='120' border='0' alt='click for full size view'>

Step 9: Now we just need to save the project:

Image Resized
[img]http://www.talkpets.com/upload/d9.GIF' width='200' height='120' border='0' alt='click for full size view'>

Now a box like this should load up

Image Resized
[img]http://www.talkpets.com/upload/c1.GIF' width='200' height='120' border='0' alt='click for full size view'>

Once this has finished you should have to files. A d2v file and a wav file.

[BC-UK Will Live]

NOTE:YOU'LL NEED TO CHANGE TMPGENC SETTINGS,SCROLL DOWN THE TOPIC
Start up Tmpgenc and close the wizard if it comes up.

Step 11:

Now choose the same options as below:


Image Resized
Image Resized
[img]http://nodeadlines.com/ebay/images/123456.GIF' width='200' height='120' border='0' alt='click for full size view'>

Step 12:
Now click on load and double click on VideoCD (NTSC).mcf

Image Resized
Image Resized
[img]http://nodeadlines.com/ebay/images/fdbndsis.GIF' width='200' height='120' border='0' alt='click for full size view'>

Now your all set just click on start:

Image Resized
Image Resized
[img]http://www.talkpets.com/upload/c4.GIF' width='200' height='120' border='0' alt='click for full size view'>

Success your mpeg is now made and ready to burn, however there may be one final step:

[BC-UK Will Live]

If the film you have made is over 74 or 80 minutes (depending on the maximum amount of time on your cd-r) you will need to split into 2 (or more) files.

To do this start up Tmpgenc and close the wizard if it appears.

Now select in File mpeg tools:



This screen will load up (below), click on Merge and Cut.



Now choose the following settings:



Open the mpeg file you wish to split:



Double click on the file you have just added and this window will appear:

Image Resized
[img]http://www.talkpets.com/upload/c9.GIF' width='200' height='120' border='0' alt='click for full size view'>

Now choose where you wish your file to start and finish:

Image Resized
[img]http://www.talkpets.com/upload/e1.GIF' width='200' height='120' border='0' alt='click for full size view'>

Then click ok.

Now choose where you want the file to save and click run.



Anyway hope this helps

[Dapadipz]

Wow!! Dats One Nice Guide

I Forgot how to do these kind of things..aint used my computer in months!!!

thanks

[BC-UK Will Live]

thats ok

thanks 4 da feedback

[BC-UK Will Live]

Tmpgenc Settings

You will need to change Tmpgenc Settings:

1: First of all load up Tmpgenc, close the wizard, and click:



2: This will load up, click on VFAPI-Plug In



3: Select all the tick boxes (like below)



And voila!

Hope this helps

[child of the korn]

VERY NICE! This guide was really helpfull for me and i recomend to anyone who wants to backup their DVDs onto their hard drive or VCDs Keep up the good work BC!

[RGX]

*thumbs up*