can anyone help me out here please. :helpsmile:
I read peerzyboy's guide, readf up on my mobo, checked my ram was compatible and read some examples of oc'n figures.
I decided I was ready to give it a try
My specs are as follows
P4 2.6 cpu northwood ht stock intel cooling
thermaltake xaser III case with all the seven fans running full tilt, and the side off at the mo
abit ic7 max 3 mobo
1 Gb corsair pc 4000 ram
radeon 9600 pro gfx 400/300 @ 537/304 (this is the only current oc, did it yesterday)
temps at the mo
case 30 degrees celcius, cpu 39/40ish, pwn (whatever that is) 33, gfx 36
I bumped up my fsb through bios in small increments and booted up and ran an aquamark benchmark, unfortunately I only got to 217 mhz from a start of 200 before things started going wrong (not booting, screen problems sound probllems etc) I expected to be able to go a fair bit higher than this.
So can anyone suggest what I should be doing, or where I am going wrong please.
Thanks
zero
Bookmarks