Comp wont Boot-Up

[DarkNess4Ever]

I just put my NF7-S V2.0 , my Athlon Xp Mobile 2500+ CPU, 1 GIG of Muskin Pc 3200 ram, Volcano 12 CPU Fan, 200 Gig H.D., and 400 Watt PSU together. I booted up the system and i hear a lot of beeps and they are going on and on with a break in between, i have tried reset cmos to no avail, also take into fact that i messed up my last mobo by getting wrong bios this is the replacement board they sent me back. Hope you guys can help me thanx a lot.

DarkNess4Ever

[tesco]

what is the combonation of beeps?
we need to know them or we cant tell you what the problem is.

[DarkNess4Ever]

well i am really not sure how to count them. i jus kno i boot-up and it goes beep break and beep breka on and on, will the beeps ever stop or what? Please help!

[tesco]

are they short beeps or long beeps?

[DarkNess4Ever]

they are long beeps

[tesco]

Beep Code - Error
1 Long 2 Short - Video Card Error - Either re-seat or replace video card
Repeating beeps - Memory Error - Memory is either damaged or badly seated
Repeating Hi/Low Beeps - Damaged or Overheating CPU
Hi Frequency Beeps - Overheating CPU


this is for award bios. let me see if that's the right bios lol.

[DarkNess4Ever]

i will try all of these things

[tesco]

here's more info:

Basic Beep Codes for ABIT AWARD BIOS Motherboards

No beep at all - this means your motherboard is dead, either due to a defective or underpowered power supply, poorly seated CPU or RAM, or a dead-on-arrival board


One beep - board is working fine


One long beep then machine shuts down - faulty, improperly installed or missing CPU


1 short(Beep) System booting is normally


2 short(Beep) CMOS setting error


1 long - 1 short(Beep) DRAM ERROR


1 long - 2 short(Beep) Display card or monitor connected error


1 long - 3 short(Beep) Keyboard Error


1 long - 9 short(Beep) ROM Error


Long(Beep) continuous DRAM isn't inserted correctly


Short(Beep) continuous POWER supply has a problem


A two-tone siren, generally caused by overheating or out of specification voltages


Four beeps then machine shuts down. This is because this version of the BIOS will shut down your machine if no fan tachometer signal is detected on the fan header. Make sure you attach a fan to the FAN1 or FAN4 header or clear CMOS to reset to default (no checking).


get to work.

[peat moss]

Here's a good link : http://www.amptron.com/html/bios.beepcodes.html

[DarkNess4Ever]

After trying reinsertin vid card, and ram , and check cpu, my system does the same thing and still wont boot, ne more ideas?