New Motherboad

When I boot up I plug the monitor to the graphic card and i get nothing. The cpu, cdr, dvdrom everything works but I cannt see anything. No bios no set up nothing! The monitor says "No signal imput"

Can someone please help me!

I'd be really grateful!! Thanks

Try jaming the video card in the agp slot more?

grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

Quote:

---

Originally posted by delphin460@3 April 2004 - 09:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

---

i dont think that would be the problem...i mean, what if ppl didnt have a pci gfx card?

is this in intergrated gfx card or a agp ?

does the card work in another system?

Quote:

---

Originally posted by Mr. Elmo+3 April 2004 - 10:44--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Mr. Elmo @ 3 April 2004 - 10:44)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-delphin460@3 April 2004 - 09:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

---

i dont think that would be the problem...i mean, what if ppl didnt have a pci gfx card?

is this in intergrated gfx card or a agp ?

does the card work in another system? [/b][/quote]
It works on another system. I am going nuts man&#33;

Anyways....I dont know but i kind of need help here with some cables.

There are two gray cables comming out from the power supply

One of the cables have four tyny cables coming out
black = (1) Ground
Red = (1) + 5V
Green = (1) + D
White = (1) - D

The second one has five
Black = (2) Shields
Black = (2) Ground
Red = (2) + 5V
Green = (2) + D
White = (2) - D


MOBO = K7T266 Pro2-U

MS-6593 (v 1.X) ATX mainboard
AMD Athlon XP/ Athlon / Duron Processor

hope this info helps u help me thanks

Catracho

Quote:

---

Originally posted by delphin460@3 April 2004 - 10:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios

change the video option to start from agp first

then change cards, and restart , this should fix it

---

Cannt do that. Cannt even see boot up, no bios nothing.
The system turns on, cpu fans work, switches work.

on the board mate have u plug&#39;d the 2 power plugs in ,the 20 pin & the 4 pin ??

Clear the CMOS.

Quote:

---

Originally posted by Virtualbody1234@3 April 2004 - 07:32
Clear the CMOS.

---

I agree

I couldnt get my mobo to read my HDD and stuff and it just wouldnt work at all.

Reseting the CMOS made it all work fine. It might take a couple of trys though.

I rekon mate he hasnt put the 4 pin in mate which is what&#39;ill happen.It&#39;ll all power bu wont post.