Printable View
When I boot up I plug the monitor to the graphic card and i get nothing. The cpu, cdr, dvdrom everything works but I cannt see anything. No bios no set up nothing! The monitor says "No signal imput"
Can someone please help me!
I'd be really grateful!! Thanks
Try jaming the video card in the agp slot more?
grab a pci video card , an old one will do, and put it in start it up and go to the bios
change the video option to start from agp first
then change cards, and restart , this should fix it
i dont think that would be the problem...i mean, what if ppl didnt have a pci gfx card?Quote:
Originally posted by delphin460@3 April 2004 - 09:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios
change the video option to start from agp first
then change cards, and restart , this should fix it
is this in intergrated gfx card or a agp ?
does the card work in another system?
i dont think that would be the problem...i mean, what if ppl didnt have a pci gfx card?Quote:
Originally posted by Mr. Elmo+3 April 2004 - 10:44--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Mr. Elmo @ 3 April 2004 - 10:44)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-delphin460@3 April 2004 - 09:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios
change the video option to start from agp first
then change cards, and restart , this should fix it
is this in intergrated gfx card or a agp ?
does the card work in another system? [/b][/quote]
It works on another system. I am going nuts man!
Anyways....I dont know but i kind of need help here with some cables.
There are two gray cables comming out from the power supply
One of the cables have four tyny cables coming out
black = (1) Ground
Red = (1) + 5V
Green = (1) + D
White = (1) - D
The second one has five
Black = (2) Shields
Black = (2) Ground
Red = (2) + 5V
Green = (2) + D
White = (2) - D
MOBO = K7T266 Pro2-U
MS-6593 (v 1.X) ATX mainboard
AMD Athlon XP/ Athlon / Duron Processor
hope this info helps u help me thanks
Catracho
Cannt do that. Cannt even see boot up, no bios nothing.Quote:
Originally posted by delphin460@3 April 2004 - 10:18
grab a pci video card , an old one will do, and put it in start it up and go to the bios
change the video option to start from agp first
then change cards, and restart , this should fix it
The system turns on, cpu fans work, switches work.
on the board mate have u plug'd the 2 power plugs in ,the 20 pin & the 4 pin ??
Clear the CMOS.
I agreeQuote:
Originally posted by Virtualbody1234@3 April 2004 - 07:32
Clear the CMOS.
I couldnt get my mobo to read my HDD and stuff and it just wouldnt work at all.
Reseting the CMOS made it all work fine. It might take a couple of trys though.
I rekon mate he hasnt put the 4 pin in mate which is what'ill happen.It'll all power bu wont post.
What 4 pin? where do i plug those ? Thanks!Quote:
Originally posted by ck-uk@3 April 2004 - 14:54
I rekon mate he hasnt put the 4 pin in mate which is what'ill happen.It'll all power bu wont post.
Like you say everything powers up but wont post. Cannt get nothing
The power supply socket on the mobo mate.
The MS-6593 mobo doesn't have connectors for the 5-pin and 4-pin power leads - just leave them loose.
Try clearing cmos - that is often the problem. Make sure you remove the power cord before trying this - it often fails to clear if you leave it connected.
If that doesn't work, remove almost everything you can from the motherboard. You should be left with keyboard, graphics card, cpu (and HSF), memory, 20 pin power and the power button connector.
If it still doesn't work you've probably got a faulty component (probably cpu or mobo), but next try reseating all the components.
everything can still boot up with a no post. no post? bad mb.
do u get any beeps.
if not it is probably a foulty mobo or psu